Banner R58, R58 Expert, Registration Mark Sensor R58 Expert User manual

  • Hello! I am an AI chatbot trained to assist you with the Banner R58 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
R58 Expert™
R58 Expert™
Registration Mark
Sensor
• Optimal contrast derived from a
combination of 3 LED colours and 16
levels of grey scale analysis
• Ultra-fast response time of 50 µs
(10 kHz switching frequency) allowing
precise detection and positioning
• Extreme performance stability
resulting from advanced micro-
processor algorithms and virtually no
temperature drift or warm up effect
• Configuration using TEACH button
to teach Static, Dynamic or Manual
Adjustment; optional via remote wire
• Indicator LEDs to show status, DO
or LO and provide 30 ms ON-delay
selection
• 8-Segment bar graph for setup
and signal strength visualisation and
control
• Robust metal housing with standard
positioned mounting holes and two
different output configurations
• Working distance of 10 mm ±3 mm
• Two lens positions (on-axis or right-
angle) and two spot positions (vertical
or horizontal) possible
Automatic detection of
any colour mark
Park Lane, Culliganlaan 2F
1831 Diegem • Belgium
Tel: +32 2 456 07 80
Fax: +32 2 456 07 89
Web: www.bannereurope.com
BANNER ENGINEERING EUROPE
E-A079 – 02/2007
Authorised distributor:
SAFETYSENSORS VISION
Objective: To detect registration marks on food packaging.
Description: The R58 Expert automatically chooses one
of three sensing LEDs – red, green or blue to maximise
contrast when detecting registration marks.
Registration Mark Detection
Objective: To identify splices on a roll of paper.
Description: The highly sensitive R58 Expert detects the
inconspicuous splice in a roll of paper, ensuring that the
printer skips over the splice.
Splice Detection in a Paper Roll
On-axis or right-angle
lens position possible
Power LED
Dynamic TEACH (+)
Push Button
Dark Operate LED
Light Operate LED
Static TEACH (-)
Push Button
Output LED
ON-Delay
Switch Point
8-Segment
Light Bar
Objective: To detect registration marks on tubes for
correct positioning before filling.
Tube Registration Mark Detection
Versions available with
M12x1 connector (5-pin)
or cable
Horizontal spot position
3 LED colours
available
Vertical spot position
/