POJJO VVS-10010 Installation guide

Type
Installation guide

This manual is also suitable for

POJJO
®
I n c ◦ 18208 Preston Rd. #D9-136 ◦ Dallas TX 75252 (p ) 214.937.3511 (f) 214.227.2017 (e) sales@pojjo.com
www.pojjo.com
VVS - Ideal Cabinet Modifications
The Opening
1) Round the inside and outside edge of the cabinet
opening
2) Bevel the bottom style to allow more room to the
opening
3) Create an opening with a 5+" height (the greater
the h ei ght, th e ea si er it i s to access and return tools )
The Panel
1) Make sure the inside surface of the panel is flat
If panel has an inlay depression,
cut 3/4" wood to fill gap and stain
2) Place knobs in a diagonal fashion, with Velcro
mal e s ecti on between:
24" wide opening required to wrap
4 cords
POJJO
®
I n c ◦ 18208 Preston Rd. #D9-136 ◦ Dallas TX 75252 (p ) 214.937.3511 (f) 214.227.2017 ◦(e) sales@pojjo.com
www.pojjo.com
21" wide opening required to wrap
3 cords
If panel height is less than 5"
consider the following
configuration:
18" wide opening required to wrap
2 cords
  • Page 1 1
  • Page 2 2

POJJO VVS-10010 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI