5.35.7
Self service food shields
5.35.7.1
Maximum vertical distance between counter top and bottom leading edge of shield shall be 13 inches
5.35.7.2
Minimum horizontal distance between the front inside edge of food and bottom leading edge of shield shall
be 3/4 of the Max. vertical distance of 5.35.7.1 (.75 x 13” = 9.75”)
5.35.7.3
The sum of a shield’s projected vertical plane (Y) and projected horizontal plane (X) shall be greater than or
equal to 20 inches. Either (X) or (Y) may equal 0
5.35.7.5
Maximum horizontal distance between vertical, horizontal, and angled panels at post and framing member
locations shell be 2 inches
5.35.7.10
Food shields for use on mobile buffet counters shall conform to 5.35.7
5.35.6
A vertical barrier (end shield) shall be provided at each end of a foodshield. The vertical barrier shall be
a minimum of 18 inches deep (front to back) beginning at the bottom leading edge of the foodshield.
The minimum height of the vertical barrier shall be equal to the overall height of the foodshield.
The maximum distance from the bottom edge of the vertical barrier and counter top shall be 1.5 inches.
5.35.6.1
A foodshield intended to be installed a maximum of 3" (76mm) from a building wall perpendicular to the
foodshield is exempt from the requirements of 5.35.6 provided that the height of the building wall is not
lower than the overall height of the foodshield.
VGG7-DS
Protected by US Patent #D614,890
Double Sided Self-Service
Protector w/ Top Shelf
& Slimline T8 Fluorescent Lamp
FINISH:
Clear Anodized Aluminum
Powder Coat:
Black Silver
RAL#
( * - Middle support is centered unless L1 dimension is specified )
GLASS (Clear Tempered):
3/8" Front - Std 1/2" Front
3/8" Top - Std
1/2" Top
Frosted
Anti - Reflective
Starfire
®
(*) Not all option available on all models
Contact Factory for specific information
For Mounting Options see Mounting
Specifications Sheet
(2) End Panels per unit unless
otherwise specified. End panels
are 1/4" clear tempered glass
unless otherwise specified.
10/18/10
- Centerline Dimensions -
L / L1 - 60" Max (3/8" Glass)
- 66" Max (1/2" Glass)
T1 - 96" Max in Single Section
L
L1*
L2
T1
21 1/16
37 3/8
23 5/8
13
17 15/16
29 5/8
LENGTHS:
-2 = 35-1/4" O.A. - 1 Section
-3 = 49" O.A. - 1 Section
-4 = 62-3/4" O.A. - 1 Section**
-5 = 76-1/2" O.A. - 2 Sections
-6 = 90-1/4" O.A. - 2 Sections
Custom = ___________ O.A.
( ** - 1/2" Clear Tempered Glass Top Panel )
PROTECTORS WITH LIGHTS AND/OR
WARMERS REQUIRE (2) END PANELS
NSF/ANSI2 -2010 Standards Requirements:
This language is copied with permission of NSF International
/
