SIIG USB Easy Transfer Cable for Windows Installation guide

Brand: SIIG

Model: USB Easy Transfer Cable for Windows

Type: Installation guide

This manual is also suitable for

JU-CB0C11-S1

SIIG USB Easy Transfer Cable for Windows is a convenient tool that allows you to seamlessly transfer data between two computers using a USB connection. It's compatible with Windows 8, 7, Vista, and XP, making it a versatile solution for various operating systems.

With this cable, you can take advantage of Windows Easy Transfer, an embedded file transfer and backup program in Windows 7 and 8. This program enables you to effortlessly migrate important files, including pictures, music, settings, folders, program settings, email messages, and even Internet bookmarks from one PC to another.

Additionally, the SIIG USB Easy Transfer Cable for Windows comes with PCLinq3 Software, which provides bi-directional data transfer functionality. This means you can select and transfer files and programs from any disk on both connected computers.

USB Easy Transfer Cable for

Windows

Quick Installation Guide

04-0878A

Introduction

The USB Easy Transfer Cable for Windows works

with Windows Easy Transfer and supports large

files backup from old PC to new PC, and it also

provides 2-way data transfer between 2 PCs.

Features and Benefits

• Works with Microsoft's Windows Easy

Transfer

• Seamless data migration, including pictures,

music, settings, folders, program settings,

email messages, and Internet bookmarks

• Software provided for a 2-way data transfer

Serial Number Sticker

For future product return or exchange, this serial

number is required. Please keep it for your

reference.

Serial Number Part Number

System Requirements

•

Desktop or notebook computer with an

available USB port

• Windows

8 (32-/64-bit) / 7 (32-/64-bit) /

Vista (32-/64-bit) / XP (32-/64-bit)

Package Contents

• USB Easy Transfer Cable for Windows

• Software CD & quick installation guide

Layout

Figure 1: Layout

Windows Easy Transfer

Windows Easy Transfer is an embedded file

transfer and backup program in Windows 7 and

Windows 8, it is used to backup all files/programs

including pictures, music, Windows settings,

folders, program settings, email messages, and

even Internet bookmarks on Disk C from an old

PC to another PC.

For Windows Vista and XP, follow the steps on

page 10 and 11 to install PCLinq3 Software and

Windows Easy Transfer program at the same

time, then follow the instructions below to backup

your Disk C of your old computer.

1. Connect each end of the USB Easy Transfer

Cable to the USB port of your 2 PCs.

2. Call out Windows Easy Transfer program:

For Windows 8: Click Windows key, right

click on desktop. Click All Applications,

then click Windows Easy Transfer icon.

For Windows 7: Click Start, All Programs,

Accessories. Click System Tools, then click

Windows Easy Transfer.

For Windows Vista / XP: Once the cable is

connected to your PCs, an Easy Transfer

Cable autoplay window will pop out. Click

Transfer files and settings to Windows 7.

3. At the Windows Easy Transfer main menu,

click Next. See Figure 2.

Figure 2

4. For the PC you want to transfer files to, click

This is my new computer.

For the PC you want to backup files from,

click This is my old computer. See Figure 3.

IMPORTANT: The OS of new computer

must be Windows 7 or later. The bit count

and language of your 2 PCs must be

identical.

Figure 3

This is my new

computer

This is my old

computer

Figure 4

For New Computer

5. If the OS of your old PC is Windows Vista

or XP, click I already installed it on my old

computer; if the OS is Windows 7 or 8, click

My old PC is running Windows 7 or 8. See

Figure 4.

Transfer

Figure 5

6. It will start scanning the files on the old

computer. Once the scanning process is

completed, click Transfer. See Figure 5.

NOTE: The file transfer direction through

Windows Easy Transfer is one-way only:

from old PC to new PC. This data transfer

direction is irreversible.

Figure 6

For Old Computer

7. Once steps 5 & 6 are done, click Next on

your old PC. The files will start copying to

your new PC. See Figure 6.

NOTE: This transferring process may take

several minutes to complete. Do not use

either of the PCs during this process.

PCLinq3 Software

PCLinq3 Software Installation

For data link function, please install the PCLinq3

software on your software CD. The data transfer

is bi-directional, and all the files/programs on all

disks could be selected and transferred.

NOTE: For PCLinq3 data link function,

there's no OS match and bit count match

restrictions.

Windows 8 (32-/64-bit) / 7 (32-/64-bit)

1. Insert the software CD. Close the CD

autoplay window if prompted.

2. Click Windows key and R, type

D:\PCLinq3_Generic_3003, then click OK.

(Change D to match your CD/DVD-ROM

drive letter)

3. At User Account Control, click Yes. Skip

this step if not prompted.

4. At Welcome to the InstallShield Wizard...,

click Next.

5. Select I accept the terms of the license

agreement, click Next, then click Finish.

6. Connect each end of the USB Easy Transfer

Cable to the USB port of your 2 PCs.

Windows Vista (32-/64-bit)

1. Insert the software CD. Click Run

Autorun.exe at the CD autoplay window,

then click Allow.

2. At Welcome to the InstallShield Wizard...,

click Next.

3. Select I accept the terms of the license

agreement, then click Next.

4. Click Finish, then continue to install

Windows Easy Transfer program.

5. At the User Account Control, click

Continue. NOTE: This process may take

several minutes to appear.

6. Click OK.

7. Click I Accept.

8. Click Close.

9. Connect each end of the USB Easy Transfer

Cable to the USB port of your 2 PCs.

Windows XP (32-/64-bit)

1. Insert the software CD.

2. At Welcome to the InstallShield Wizard...,

click Next.

3. Select I accept the terms of the license

agreement, click Next.

4. Click Finish, then continue to install

Windows Easy Transfer program.

5. Click Next at the Windows Easy Transfer

for Windows 7. NOTE: This process may

take several minutes to appear.

6. Select I Agree , then click Next.

7. Click Finish.

8. Connect each end of the USB Easy Transfer

Cable to the USB port of your 2 PCs.

PCLinq3 Control Panel

1. After the 2 PCs are connected,

For Windows 8: Click Windows key, right

click on desktop. Click All Applications,

then click PCLinq3.

For Windows 7 / Vista / XP: Click Start, then

click PCLinq3.

NOTE: You can select either PCLinq3

(Ansi) or (Unicode), but the selection for 2

PCs should be identical.

2. Select the disk, then select the file. You can

use the Cut/Copy/Paste button on the panel,

or drag the selected files directly to your

destination folder of another computer.

Local PC Remote PC

Connect/

Disconnect

Cut/Copy/

Paste

Local PC

Disk selection

Remote PC

Disk selection

Connection

status indicator

Figure 7

To Verify Windows Installation

1. Check in Device Manager.

For Windows 8 / 7 / XP: Right click Computer

or My Computer, click Manage, then click

Device Manager.

For Windows Vista: Right click Computer,

click Manage, click Continue, then click

Device Manager.

2. Double click Universal Serial Bus

Controller, USB Composite Device should

be displayed.

Application

Data backup via Windows Easy Transfer

PC with OS

Windows 8, 7,

Vista, or XP

PC with OS

Windows 8, 7,

Vista, or XP

Figure 9

* Data on all the Disks of both PCs are selectable and transferable to each other

Bi-directional data transfer via PCLinq3

"New PC" with

OS Windows 8

or 7

"Old PC" with OS

Windows 8, 7, Vista,

or XP

*Copy all the data on Disk C from "old PC" to "new PC"

Figure 8

Technical Support and Warranty

QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at

www.siig.com and click Support. Our online support database is updated daily with

new drivers and solutions. Answers to your questions could be just a few clicks away.

You can also submit questions online and a technical support analyst will promptly

respond.

SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the

original purchaser and guarantees the product to be free of any defects in materials or

workmanship for five (5) years from the date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product

having similar features and functionality) the product if defective in materials or

workmanship. This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store

where you purchased from.

B) If your purchase has passed the store's return policy period, please follow the steps

below to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT

to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request

will be processed, if the product is determined to be defective, an RMA number will

be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the

original package must be included.

• Clearly write your RMA number on the top of the returned package. SIIG will

refuse to accept any shipping package, and will not be responsible for a product

returned without an RMA number posted on the outside of the shipping

carton.

• You are responsible for the cost of shipping to SIIG. Ship the product to the

following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

• SIIG will ship the repaired or replaced product via Ground in the U.S. and

International Economy outside of the U.S. at no cost to the customer.

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,

and legacy I/O adapters) that bridge the connection between Desktop/

Notebook systems and external peripherals. SIIG continues to grow by adding

A/V and Digital Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features,

and are backed by an extensive manufacturer warranty. High quality control

standards are evident by the overall ease of installation and compatibility of

our products, as well as one of the lowest defective return rates in the industry.

SIIG products can be found in computer retail stores, mail order catalogs,

through major distributors, system integrators, and VARs in the Americas and

the UK, and through e-commerce sites.

USB Easy Transfer Cable for Windows is a trademark of SIIG, Inc. SIIG and the SIIG logo are

registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of

Microsoft Corporation. All other names used in this publication are for identification only and

may be trademarks of their respective owners.

PRODUCT NAME

USB Easy Transfer Cable for Windows

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

SIIG USB Easy Transfer Cable for Windows Installation guide

Brand: SIIG

Model: USB Easy Transfer Cable for Windows

Type: Installation guide

This manual is also suitable for

JU-CB0C11-S1

Download PDF

report

SIIG USB Easy Transfer Cable for Windows Installation guide

This manual is also suitable for

SIIG USB Easy Transfer Cable for Windows Installation guide

Related papers

Other documents