Liebherr IKP 2060 Premium Operating instructions

Brand: Liebherr

Model: IKP 2060 Premium

Type: Operating instructions

Operating instructions

Built-in refrigerators

300709

7084194 - 00

IKP/ SIKP ... 6

Contents

1 Appliance at a glance............................................ 2

1.1 Range of appliance use............................................ 2

1.2 Conformity................................................................ 2

1.3 Description of appliance and equipment.................. 2

1.4 Saving energy.......................................................... 2

2 General safety information................................... 3

3 Controls and displays........................................... 3

3.1 Operating and control elements............................... 3

3.2 Temperature display................................................. 3

4 Putting into operation............................................ 3

4.1 Transporting the appliance....................................... 3

4.2 Installing the appliance............................................. 3

4.3 Disposing of packaging............................................ 4

4.4 Connecting the appliance......................................... 4

4.5 Switching on the appliance....................................... 4

5 Control.................................................................... 4

5.1 Brightness of the temperature display...................... 4

5.2 Child proofing........................................................... 5

5.3 Refrigerator compartment........................................ 5

5.4 Freezer compartment............................................... 6

6 Maintenance........................................................... 6

6.1 Manual defrosting..................................................... 6

6.2 Cleaning the appliance............................................. 7

6.3 Customer service..................................................... 7

7 Malfunction............................................................. 7

8 Decommissioning.................................................. 8

8.1 Switching off the appliance....................................... 8

8.2 Taking the appliance out of service.......................... 8

9 Disposing of the appliance................................... 8

The manufacturer works constantly on the further development

of all the types and models. Therefore please understand that we

have to reserve the right to make design, equipment and techni-

cal modifications.

To get to know all the benefits of your new appliance, please read

the information contained in these instructions carefully.

The instructions apply to several models. Differences may occur.

Text relating only to specific appliances is marked with an aster-

isk (*).

Instructions for action are marked with a

, the results of

action are marked with a .

1 Appliance at a glance

1.1 Range of appliance use

The appliance is suited only for cooling food.

In the case of commercial food cooling, the pertinent statutory

regulations have to be observed. The appliance is not suited for

storing and cooling pharmaceuticals, blood plasma, laboratory

preparations or similar substances and products subject to the

Medical Devices Directive 2007/47/EC. Any misuse of the appli-

ance may result in damage to or spoilage of the stored goods.

Furthermore, the appliance is unsuited for use in areas exposed

to an explosion hazard.

The appliance is set to operate within specific ambient temper-

ature limits according to its climate rating. The correct climate

rating for your appliance is indicated on the type plate.

Note

Compliance with the ambient temperatures indicated is re-

quired, otherwise the cooling performance is reduced.

Climate rat-

ing

for ambient temperatures of

SN 10 °C to 32 °C

N 16 °C to 32 °C

ST 16 °C to 38 °C

T 16 °C to 43 °C

1.2 Conformity

The refrigerant circuit has been tested for leaks. When installed,

this appliance complies with the relevant safety provisions and

EC directives 2006/95/EC and 2004/108/EC.

1.3 Description of appliance and equip-

ment

Fig. 1

(1) Operating and control el-

ements

(10) Freezer compartment*

(2) Butter and cheese com-

partment

(11) Bottle shelf

(3) Fan* (12) Coldest zone

(4) Shelf, sectioned (13) Drain hole

(5) Holder for bottles and tin-

ned food, relocatable

(14) Type plate

(6) Rack for tinned food, re-

locatable

(15) Vegetable bins*

(7) Shelf, relocatable (16) Vegetable bins on roller

plates*

(8) Interior light (17) Adjustable-height feet at

the front

(9) Rack for tall bottles

1.4 Saving energy

Always pay attention to good ventilation.

Appliance at a glance

Keep the time the appliance is open to a minimum.

Store food logically.

First cool warm food to room temperature before storing it .

Defrost frozen food in the refrigerator.*

If there is a thick layer of frost in the appliance: defrost the

appliance.*

2 General safety information

Danger for the user:

This appliance is not designed for persons (including children)

with physical, sensory or mental impairment or persons not

having sufficient experience and knowledge, unless they are

instructed in the use of the appliance and are initially super-

vised by a person responsible for their safety. Keep children

under supervision to ensure they do not play with the appli-

ance.

In case of a fault, pull out the mains plug (not by pulling the

connecting cable) or switch off the fuse.

Have any repairs to or intervention in the appliance, and any

change of the mains power cable, carried out by the customer

service only or by other specialised personnel trained for the

purpose.

When disconnecting the appliance from the supply, always

take hold of the plug. Do not pull the cable.

Install and connect the appliance only as instructed.

Please keep these instructions in a safe place and pass them

on to any subsequent owners.

Fire hazard:

The refrigerant R 600a is environmentally friendly but flam-

mable. Escaping refrigerant may ignite.

•

Do not damage the refrigerant circuit pipes.

•

Do not allow naked flames or ignition sources to enter the

appliance.

•

Do not use any electrical appliances in the interior (e.g.

steam cleaners, heaters, ice cream maker etc.).

•

If refrigerant escapes: eliminate naked flames or sources

of ignition from the vicinity. Pull out the power plug. Venti-

late the area well. Notify customer service.

Do not store explosives or sprays using combustible propel-

lants such as butane, propane, pentane, etc. in the appliance.

Respective spray cans can be identified by reference to the

contents printed on the can or by a flame symbol. Gases pos-

sibly escaping may ignite due to electrical components.

Only store high-percentage alcohol in tightly sealed, upright

containers. Alcohol possibly escaping may ignite due to elec-

trical components.

Danger of tipping and falling:

Do not misuse the plinth, drawers, doors etc. as a step or for

support. This applies particularly to children.

Danger of food poisoning:

Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

Avoid lasting skin contact with cold surfaces or refrigerated/

frozen food or take protective steps, e.g. wear gloves. Do not

consume ice cream, water ice or ice cubes immediately and

do not consume them too cold.

Risk of crushing*

Please observe the specific information in the other sec-

tions:

DANGER identifies a situation involving direct

danger which, if not obviated, may re-

sult in death or severe bodily injury.

WARNING identifies a dangerous situation

which, if not obviated, may result in

death or severe bodily injury.

CAUTION identifies a dangerous situation

which, if not obviated, may result in

minor or medium bodily injury.

NOTICE identifies a dangerous situation

which, if not obviated, may result in

damage to property.

Note identifies useful information and tips.

3 Controls and displays

3.1 Operating and control elements

Fig. 2

(1) Temperature display (5) On/Off button

(2) Up setting button (6) SuperCool button

(3) Down setting button (7) Fan button

(4) Child lock symbol

3.2 Temperature display

The following are displayed in normal operation:

the average cooling temperature

The following displays indicate malfunction. Possible causes and

corrective action (see Malfunction).

F0 to F5

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect trans-

port!

Transport the appliance in a packed condition.

Transport the appliance upright.

Do not transport the appliance without assistance.

4.2 Installing the appliance

In the event that the appliance is damaged, contact the supplier

immediately before connecting to the mains.

The floor at the site must be flat and level.

Do not install the appliance in a location where it is exposed to

direct radiation of the sun, next to a cooker, heater and similar.

Do not install the appliance without assistance.

General safety information

Standard EN 378 specifies that the room in which you install your

appliance must have a volume of 1 m

per 8 g of R 600a refrig-

erant used in the appliance. If the room in which the appliance is

installed is too small, a flammable gas-air mixture may form in the

event of a leakage in the refrigeration circuit. The quantity of re-

frigerant used in your appliance is indicated on the type plate on

the inside of the appliance.

Fit the appliance in stable kitchen units only.

The following ventilation gaps must be observed:

The depth of the ventilation channel at the rear of the unit must

be at least 38 mm.

There must be a ventilation space of at least 200 cm

in the

plinth and at the top of the unit.

Basically the principle applies: the larger the ventilation space,

the more energy-saving the appliance is in operation.

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause short

circuits.

The appliance is designed for use in enclosed areas. Do not

operate the appliance outdoors or in areas where it is exposed

to splash water or damp conditions.

WARNING

Fire hazard due to refrigerant!

The refrigerant R 600a is environmentally friendly but flammable.

Escaping refrigerant may ignite.

Do not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

Do not place appliances emitting heat e.g. microwaves, toast-

ers etc. on the appliance!

Note*

The aluminium-coloured bags at the back of the appliance are

important for the functional efficiency. Their contents are non-

toxic and nonhazardous.

Do not remove the aluminium-coloured bags!

Detach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

After installation:

Remove the protective film from the decorative trims.

Remove the protective film from the decorative trims and

drawer fronts.*

Remove all transit supports.

Dispose of packaging material (see 4.3) .

NOTICE

Risk of damage due to condensate!

If your appliance is not a Side-by-Side (SBS) appliance:

do not install the appliance directly alongside a further refrig-

erator/freezer.

If the appliance is installed in a very damp environment, conden-

sate may form on the outside of the appliance.

Always see to good ventilation at the installation site.

4.3 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic film!

Do not allow children to play with packing material.

The packaging is made of recyclable materials:

corrugated board/cardboard

EPS moulded parts

polythene bags and sheets

polypropylene straps

Take the packaging material to an official collecting point.

4.4 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

Do not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

WARNING

Fire and overheating hazard!

Do not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the instal-

lation site have to conform with the data on the type plate (see

Appliance at a glance).

Connect the appliance only with a properly installed

socket outlet with earthing contact. The socket outlet

must be fused with 10 A or higher.

Check the electrical connection.

Clean the appliance .

Plug in the power plug.

4.5 Switching on the appliance

Put the appliance into operation about 2 hours before first loading

food to be frozen.*

Press On/Off button

Fig. 2 (5)

The temperature display indicates the current temperature.

The interior light is on when the door is open.

5 Control

5.1 Brightness of the temperature dis-

play

You can adjust the brightness of the temperature display to the

light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The brightness is adjustable between h1 (minimum luminosity)

and h5 (maximum luminosity).

To activate the setting mode: press SuperCool button

Fig. 2 (6)

for about 5s.

The display indicates c.

The SuperCool button flashes.

Using the Up setting button

Fig. 2 (2)

and Down setting but-

ton

Fig. 2 (3)

, select h.

To confirm: briefly press the SuperCool button

Fig. 2 (6)

To set the display brighter: press the Up setting but-

ton

Fig. 2 (2)

To set the display darker: press the Down setting

button

Fig. 2 (3)

To confirm: briefly press the SuperCool button

Fig. 2 (6)

The brightness is adjusted to the new value.

To deactivate the setting mode: press the On/Off button

Fig. 2 (5)

-or-

Control

Wait for 5 minutes.

The temperature is indicated again in the temperature display.

5.2 Child proofing

The child-proofing function enables you to make sure that the

appliance is not inadvertently switched off by playing children.

5.2.1 Setting the child lock

To activate the setting mode: Press the SuperCool button

Fig. 2 (6)

for approx. 5 seconds.

The SuperCool button flashes. The display indicates c.

Briefly press the SuperCool button

Fig. 2 (6)

to confirm.

To switch on: Using the Up setting button

Fig. 2 (2)

or Down setting button

Fig. 2 (3)

, select c 1.

To switch off: Using the Up setting button

Fig. 2 (2)

or Down setting button

Fig. 2 (3)

, select c 0 wählen.

To confirm: Press the SuperCool button

Fig. 2 (6)

When the child lock symbol

Fig. 2 (4)

shines, the child lock is

activated.

To deactivate the setting mode: Press the On/Off button

Fig. 2 (5)

-or-

Wait for 5 minutes.

The temperature is indicated again in the temperature display.

5.3 Refrigerator compartment

The natural circulation of air in the refrigerator compartment re-

sults in zones differing in temperature. It is coldest directly above

the vegetable drawers and at the rear wall. It is warmest at the

top front of the compartment and in the door.

5.3.1 Food refrigeration

Store perishable food such as ready-to-serve dishes, meat

products and sausages in the coldest zone. Place butter, eggs

and preserves in the upper area and in the door (see Appli-

ance at a glance).

Use recyclable plastic, metal, aluminium and glass containers

and cling film for wrapping.

For appliances from 1216 mm high:

Use the front area of the refrigerator compartment floor only

for briefly putting down cooled products, e.g. when rearrang-

ing and sorting. However do not leave cooled products there

otherwise they may be pushed back or tipped over when the

door is closed.

Do not store food too close together to enable good air circu-

lation.

To safeguard bottles from tipping over: move the bottle holder.

5.3.2 Setting the temperature

The temperature can be set from 9 °C to 2 °C, the recommended

temperature is 5 °C.

An average temperature of about –18 °C is reached in the freezer

compartment.*

For a higher temperature setting: press Up button

Fig. 2 (2)

For a lower temperature setting: press Down button

Fig. 2 (3)

The first time the button is pressed, the value set so far is in-

dicated in the temperature display.

To change the temperature in 1 °C steps: briefly press the

button.

To change the temperature continuously: hold down the but-

ton.

The value is displayed flashing during the setting operation.

The actual temperature is displayed about 5 s after the last

press of a button. The temperature slowly adjusts to the new

value.

5.3.3 SuperCool

With SuperCool you switch to the highest cooling performance

to reach lower cooling temperatures. Use SuperCool, to rapidly

cool large amounts of food.

When SuperCool is activated, the fan runs. The appliance oper-

ates with maximum refrigeration. The noise of the refrigeration

unit may be temporarily louder as a result.

The SuperCool function uses slightly more energy.

Cooling with SuperCool

Briefly press SuperCool button

Fig. 2 (6)

The SuperCool button

Fig. 2 (6)

lights up.

The cooling temperature drops to the coldest value. Super-

Cool is activated.

SuperCool is automatically deactivated after 6 to12 hours The

appliance continues to operate in the energy-saving, normal

mode.

To prematurely deactivate SuperCool

Briefly press SuperCool button

Fig. 2 (6)

The SuperCool button

Fig. 2 (6)

goes out.

SuperCool is deactivated.

5.3.4 Fan*

With the fan you can rapidly cool large quantities of fresh food or

achieve a relatively even distribution of temperature across all

the storage levels.

The forced-air cooling is to be recommended:

at high room temperature (from approx. 30 °C )

at high humidity

The forced-air cooling uses slightly more energy. To save ener-

gy, the fan switches off automatically when the door is open.

Switching on the fan*

Briefly press the fan button

Fig. 2 (7)

The fan button shines.

The fan is active. It switches on automatically when the com-

pressor runs.

To switch off the fan*

Briefly press the fan button

Fig. 2 (7)

The fan button goes out.

The fan is switched off.

5.3.5 Relocating the shelves

The shelves have stops preventing them from being unintention-

ally pulled out.

Lift the shelf and draw it out forwards.

Insert shelf with the raised edge pointing upwards at the back.

The food does not freeze onto the rear wall.

5.3.6 Using the sectioned shelf

Fig. 3

Control

The glass shelf with stop face (2) has to be at the back.

5.3.7 Moving the storage rack

Remove storage rack according to il-

lustration.

Always remove the butter and cheese

compartment together with the lid.

To remove lid: Press one side part of

the butter and cheese compartment

outwards until the lid pin is clear and

then remove the lid sideways.

5.3.8 Removing the bottle holder

Always take hold of the bottle holder on

the plastic part.

5.4 Freezer compartment*

You can store frozen food for several months, make ice cubes

and freeze fresh food in the freezer compartment at a tempera-

ture of -18 °C and lower.

The air temperature in the compartment, measured by thermom-

eter or other instruments, may fluctuate.

5.4.1 Freezing food*

2 kg fresh food/24 h is the maximum weight which can be frozen.

CAUTION

Risk of injury due to broken glass!

Bottles and cans containing drinks may burst when being frozen.

This applies particularly to sparkling drinks.

Do not freeze bottles and cans containing drinks!

4 h before freezing food, set the temperature to 5 °C or colder.

In order that the food is rapidly frozen through to the core, do not

exceed the following quantities per pack:

- Fruit, vegetables up to 1 kg

- Meat up to 2.5 kg

Pack the food in portions in freezer bags, reusable plastic,

metal or aluminium containers.

Spread the food over the shelf. Do not allow it to contact and

thaw items that are already frozen.

Set the temperature back again 24 h after placing the food

inside.

5.4.2 Storage times*

Guide times for storing various types of food in the freezer

compartment:

Ice cream 2 to 6 months

Sausage, ham 2 to 6 months

Bread, bakery products 2 to 6 months

Game, pork 6 to 10 months

Guide times for storing various types of food in the freezer

compartment:

Fish, fatty 2 to 6 months

Fish, lean 6 to 12 months

Cheese 2 to 6 months

Poultry, beef 6 to 12 months

Vegetables, fruit 6 to 12 months

Storage times given are guide times.

5.4.3 Thawing food

- in the refrigerator compartment

- at room temperature

- in a microwave oven

- in a conventional or fan oven

Food once thawed should be re-frozen only in exceptional

cases.

6 Maintenance

6.1 Manual defrosting

6.1.1 Defrosting refrigerator compartment

The refrigerator compartment is defrosted automatically. The

defrost water evaporates as a result of the heat of the compres-

sor. Drops of water on the rear wall are perfectly normal.

Clean the drain hole at regular intervals to allow the defrost

water to drain (see 6.2) .

6.1.2 Defrosting freezer compartment*

A layer of frost and ice forms in the freezer compartment after the

appliance has been in use for a lengthy period of time. This is

quite normal. The layer of frost and ice forms more quickly if the

door is opened frequently or if the food is warm when placed

inside. However, a thick layer of ice will increase the appliance‘s

energy consumption. You should therefore defrost the appliance

regularly.

CAUTION

Risk of injury and damage as a result of hot steam!

Do not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting.

Do not remove ice using sharp instruments.

Switch off the appliance.

The temperature display goes out.

If the temperature display does not go out, the child-proofing

function (see 5.2) is active.

Pull out the plug.

Wrap the frozen food in newspaper or blankets and store in a

cool place.

Place a pan with hot, not boiling water

on the floor of the compartment.

Defrosting is speeded up.

Leave the compartment and appli-

ance door open during defrosting.

Remove detached pieces of ice.

Pay attention that the defrost water does not run into the kitch-

en unit.

If necessary, pick up defrost water several times, using a

sponge or cloth.

Clean the compartment (see 6.2) .

Maintenance

6.2 Cleaning the appliance.

Before cleaning:

CAUTION

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

Do not use cleaning agents in concentrated form.

Do not use any scouring or abrasive sponges or steel wool.

Do not use any cleaning agents containing sand, chloride,

chemicals or acid.

Do not use chemical solvents.

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

Do not pull off, bend or damage cables or other components.

Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

Empty the appliance.

Pull out the plug.

- Use soft cleaning cloths and a multi-purpose clean-

ing agent with neutral pH value.

- Only use food compatible cleaning and care agents

on the inside of the appliance.

Clean the plastic surfaces, outside and inside, by hand using

lukewarm water and a little washing-up liquid.

To clean the drain opening: remove

any deposits with a fine instrument,

e.g. a cotton bud.

Items of equipment:

Clean roller plates in the dishwasher.*

Clean other items of equipment by hand with lukewarm water

and a little washing-up liquid.

For cleaning, remove the support rails for the half-sized glass

shelves.

To dismantle the shelves: remove the

trims and side parts.

To dismantle the storage rack: re-

move the protective film from the dec-

orative trims.

After cleaning:

Wipe dry the appliance and items of equipment.

Connect the appliance and switch it on again.

Put the food back inside.

6.3 Customer service

First check whether you can correct the fault yourself by refer-

ence to the list (see Malfunction). If this is not the case, please

contact the customer service whose address is given in the en-

closed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

Have any repairs to and intervention in the appliance and

mains power cable, which are not expressly mentioned in the

(see Maintenance) carried out by the customer service only.

Read the appliance

designation

Fig. 4 (1)

service No.

Fig. 4 (2)

and serial No.

Fig. 4 (3)

off the type

plate located inside the

appliance on the left-

hand side.

Fig. 4

Notify the customer service, specifying the fault, appliance

designation

Fig. 4 (1)

, service No.

Fig. 4 (2)

and serial No.

Fig. 4 (3)

This will help us to provide you with a faster and more accurate

service.

Keep the appliance closed until the customer service arrives.

The food will stay cool longer.

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your appliance is designed and manufactured for a long life span

and reliable operation. If a malfunction nonetheless occurs dur-

ing operation, check whether it is due to a handling error. In this

case you will have to be charged for the costs incurred, even

during the warranty period. You may be able to rectify the follow-

ing faults yourself:

Appliance does not work.

→

The appliance is not switched on.

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

Check power plug.

→

The fuse of the wall socket is not in order.

Check fuse.

The compressor runs for a long time.

→

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

This is normal in energy-saving models.

→

SuperCool is activated.

The compressor runs for longer in order to rapidly cool the

food. This is normal.

Excessive noise.

→

Speed-controlled* compressors may produce varying run-

ning noise due to different speed steps.

The sound is normal.

A bubbling and gurgling noise.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

The sound is normal.

A quiet clicking noise.

→

The noise is produced whenever the refrigeration unit (motor)

automatically switches on or off.

The sound is normal.

A hum. It is briefly a little louder when the refrigeration unit

(the motor) switches on.

→

The refrigeration increases automatically when the Super-

Cool function is activated, fresh food has just been placed in

the appliance or the door has been left open for a while.

The sound is normal.

→

The ambient temperature is too high.

Solution: (see 1.1)

A low hum.*

→

The sound is produced by air flow noise of the fan.

The sound is normal.

Malfunction

Vibratory noise.

→

The appliance is not standing firmly on the floor. As a result,

adjoining units or objects are set into vibration by the running

refrigeration unit.

Move bottles and containers apart.

Flow sound at the soft stop mechanism.*

→

The noise is produced when the door is opened and closed.

The sound is normal.

The temperature display indicates: F0 to F5.

→

There is a fault.

Contact the customer service (see Maintenance).

The temperature is not cold enough.

→

The door of the appliance is not properly closed.

Close the door of the appliance.

→

Insufficient ventilation.

Clear ventilation grilles.

→

The ambient temperature is too high.

Solution: (see 1.1) .

→

The appliance was opened too frequently or for too long.

Wait until the appliance reaches the required temperature it-

self. If not, contact the customer service. (see Mainte-

nance).

→

The temperature is incorrectly set.

Set to a colder temperature and check after 24 h.

→

The appliance is too close to a heat source.

Solution: (see Putting into operation).

→

The appliance was not inserted properly into the recess.

Check whether the appliance was inserted correctly and the

door closes properly.

The interior light is not on.

→

The appliance is not switched on.

Switch on the appliance.

→

If the interior light is not on but the temperature display is lit,

the bulb is faulty.

Change the bulb: (see Maintenance)

→

The LED lighting is defective or the cover is damaged:

WARNING

Risk of injury due to electric shock!

Live parts are located under the cover.

Have the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the

purpose.

WARNING

Danger of injury due to laser radiation, class 1M.

Do not look inside when the cover is open.

8 Decommissioning

8.1 Switching off the appliance

Press On/Off button

Fig. 2 (5)

for about 2 s.

The temperature display is dark.

8.2 Taking the appliance out of service

Empty the appliance.

Pull out the power plug.

Clean the appliance .

Leave the door open to prevent odour.

9 Disposing of the appliance

The appliance contains some reusable materials

and should be disposed of properly - not simply with

unsorted household refuse. Appliances which are no

longer needed must be disposed of in a professional

and appropriate way, in accordance with the current

local regulations and laws.

When disposing of the appliance, ensure that the refrigeration

circuit is not damaged to prevent uncontrolled escape of the re-

frigerant it contains (data on type plate) and oil.

Disable the appliance.

Pull out the plug.

Cut through the connecting cable.

Decommissioning

Liebherr IKP 2060 Premium Operating instructions

Liebherr IKP 2060 Premium Operating instructions

Liebherr IKP 2060 Premium Operating instructions

Related papers

Other documents