Star Manufacturing International 10 Sunnen Drive St. Louis, MO 63143
Part #: 2M-W368 Phone: 314-781-2777 Fax: 314-781-2714
Rev. - www.star-mfg.com December 8, 2006
Service Manual for the Lang Kit: SKXLH740-1,
Mercury switch service kit
Model:
CSE12 & CSE12-ACD
CSE12-1 & CSE12-208VCD
2 Rev. - 2006
CONTENTS OF KIT
WIRING DETAIL
3 Rev. - 2006
INSTRUCTIONS FOR INSTALLATION
- Remove 4 screws indicated in illustration 1 & 2 to remove hood cover.
WARNING: With the hood cover removed the CSE12 unit will NOT be held in the down position.
-Remove 2 screws shown in illustration 3. Ensure that numbers on wires to existing mechanical switch
are legible. If not legible, renumber as indicated in illustration 4. Disconnect wires from mechanical
switch.
-Cut the connectors from the switch wires as shown in illustration 5 and strip each wire 3/8”. Install
mercury hood switch assembly with the two screws removed in previous step per illustration 6.
-Wire nut wires from the mercury hood switch assembly to corresponding existing wires as shown in
illustration 7. Tuck the wires and wire-nuts into the switch box as shown in illustration 8.
-Replace hood cover.
Ill
us
trati
o
n 1 Ill
us
trati
o
n 2
Ill
us
trati
o
n 4Ill
us
trati
o
n 3
Ill
us
trati
o
n 6Ill
us
trati
o
n 5
Ill
us
trati
o
n
7
Ill
us
trati
o
n8
/
