Part-2 MENU-SCREEN GUIDE
SET
PRESET
MENU
ON
BACK
PRESET
MENU
ON
BACK
PRESET
MENU
OFF
END
ON
END
ON
END
SYNC
WD
BLC
IRIS
WHITE BALANCE
AGC GAIN
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
y
y
y
y
INT
ON
ON
SET
ATW
NORMAL
50
NORMAL
AUTO
SET
OFF
END
1
34
<Main Menu>
Main Menu
1
Menu Item
2
Setting Value
3
Sub Menu
4
Factory default
To be back
To end
1
INT L-L y
ON
ATW MWB y
NORMAL HIGH
SET y
50 (60) 120 (100) 250 500 1000 2000 4000 10000
( ): VCC-W9874VA/VDC-WD9884VA
Menu Item Setting Value Sub Menu
SET y
SYNC
WD
BLC
IRIS
WHITE BALANCE
AGC GAIN
SHUTTER
APERTURE
DAY/NIGHT
OPTION
2
3
4
5
6
7
8
9
F
L-L SETTING
[V SYNC PHASE]
0
+
WD SETTING
[LEVEL]
8
+
[SENSITIVITY]
3
+
IRIS SETTING
[LEVEL]
50
+
MWB SETTING
R 112
B 60
AWC LOCK
+
+
SET
D/N SETTING-AUTO
LEVEL
BURST
LOW
OFF
D/N SETTING-B/W
BURST
OFF
OPTION
TITLE
DNR
OFF
1
:;~ABCDEFGHIJKLM123
,. NOPQRSTUVWXYZ456
+-/abcdefghijklm789
'()nopqrstuvwxyz*0#
POSITION
PRESET
MENU
SET
OFF
BACK
????????????????
y
"<> &!
2
DOWN
UP
RIGHT
LEFT
SET
SET
SET
SET
3 second or more
SET
2
✱1: VDC-WD9885VP/WD9884VA
A
B
A
B
OFFON y
OFF
OFF
OFFNORMAL HIGH
AUTO y COLOR B/W y
LOW
OFF ON y
OFF21
✱1
DOWN
UP
RIGHT
LEFT
Wide Dynamic Range Camera
Caméra wide dynamic range
Cámara de gama dinámica ancha
Wide Dynamic Range Kamera
摄像头
VCC-W9875VP/VDC-WD9885VP
VCC-W9874VA/VDC-WD9884VA
L5DA2_DC2_XE_US(GB_FR_ES_DE_CS).book 1 ページ ２００９年７月１５日 水曜日 午後１２時２６分
English
b INT (Internal sync)
b L-L (Line-Lock): Only when using an AC power supply
Make adjustments so that the vertical synchronization of the
monitor screen does not move up or down.
Correction is made for simultaneous
monitoring of subjects which are
different in brightness, one in a dark
room and another in bright outdoor
environment, for example.
• If “DAY/NIGHT” is set to “B/W”,
“WD” is disabled.
[LEVEL]
The greater the number, the brighter the dark area becomes.
• This setting may cause the noise generation.
[SENSITIVITY]
The greater the number, the stronger the contrast between light
and dark areas becomes.
• This setting may cause the image to obtain unnatural
contours.
• If “WD” is “ON”, the object becomes brighter.
Lens iris level adjustment
The greater the number, the brighter it gets.
b ATW (Auto-Tracing White balance)
b MWB (Manual White Balance)
The greater the number, the deeper the tint becomes.
[AWC LOCK]
(
Auto White balance Control)
One-Push Adjustment:
Adjusts a white subject so that it
appears natural white. The white
balance adjustment has been
completed when the highlighted
comes back in approx. 10 seconds.
• The white balance may not be properly adjusted depending
on the monitoring environment. If this is the case, repeat the
above step until natural white balance is obtained.
Setting with which a bright image is obtained in a lower
illuminance.
• “HIGH” setting could may cause noise generation and a grainy image.
• If “DAY/NIGHT” is set to “AUTO”, “AGC GAIN” cannot be set to “OFF”.
With the increase in shutter speed number, faster movement can
be captured, though the image becomes darker.
(e.g., 50 (60) refers to 1/50 (1/60) second)
b AUTO
Automatically switches between COLOR and B/W mode
depending on the ambient brightness (DAY/NIGHT function).
• Even when the “AGC GAIN” has been set to “OFF”, setting
the “DAY/NIGHT” to “AUTO” automatically switches the “AGC
GAIN” setting to “NORMAL”.
[LEVEL]
• LOW: Switches in darker conditions.
• HIGH: Switches in brighter conditions.
[BURST] ON/OFF
Burst signal inserted into the Black-and-White image.
b COLOR
Color image on a steady basis; suitable for always bright location
or conditions.
b B/W
B/W image on a steady basis; suitable when sensitivity is
prioritized. “WD” is disabled.
[BURST] ON/OFF
Burst signal inserted into the Black-and-White image.
• The color image will be displayed first when the power is
turned on.
• When switching between color and black-and-white images
automatically, it is normal for movement of the optical filter to
be heard and for a vertical black band to move across the
screen.
• Switching from black-and-white to color may occur if there is
a significant degree of reflection from the object when using
infrared illumination in black-and-white image. Adjust the
illumination to avoid switching to color image.
• The focus setting position may differ between color and
black-and-white images. Carry out adjustment to ensure that
the focus for both images is in the optimum position.
b TITLE (Naming Cameras)
1Select a character. (Up to 16 characters)
The characters “???....” do not appear on the monitoring screen,
but if you enter no character at all, the monitor will show you
“???...”.
2Displayed on the monitor in two lines
Insert the line feed mark in the “ID string”.
• You can enter up to 16 characters including the line feed mark .
3Change the character
1 Move ( ) onto it in the “ID string”.
2 Select any new character.
4To determine these display position of the name
Select [POSITION] – “SET” and press the SET button.
b DNR (Digital Noise Reduction)
• The digital noise reduction can be used to reduce the noise
generated when the luminance level is low.
• The greater the number, the lower the noise becomes.
However, this setting may lower the resolution.
1 SYNC Sync Setting
2 WD Wide Dynamic Range
b ON b OFF
3 BLC Backlight Compensation
b ON (Center zone metering) b OFF
4 IRIS Iris Setting
5 WHITE BALANCE White Balance
[R] Adjusting Red [B] Adjusting Blue
6 AGC GAIN Auto Gain Control
b NORMAL b HIGH (For a dark subject) b OFF
7 SHUTTER Shutter Speed
8 APERTURE Aperture Compensation
b NORMAL b HIGH b LOW b OFF
9 DAY/NIGHT Day/Night Setting (VDC-WD9885VP/WD9884VA)
White paper or wall
SET
F OPTION Option Settings
[ON]
↔ [OFF]
[1]
↔ [2] ↔ [OFF]
:;~ABCDEFGHIJKLM123
,. NOPQRSTUVWXYZ456
+-/abcdefghijklm789
'()nopqrstuvwxyz*0#
POSITION
PRESET
MENU
SET
OFF
BACK
R???????????????
y
"<> &!
2
ROOM1???????????
SET
DOWN
UP
RIGHT
LEFT
1
3
4
2
ID String
ROOM1
SET
L5DA2_DC2_XE_US(GB_FR_ES_DE_CS).book 2 ページ ２００９年７月１５日 水曜日 午後１２時２６分
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
Sanyo VDC-WD9885VP Menu Manual
- Type
- Menu Manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Sanyo VDC-WD9885VP
- español: Sanyo VDC-WD9885VP
- Deutsch: Sanyo VDC-WD9885VP
Related papers
-
Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom Camera User manual
-
Sanyo VCC-XZ200P User manual
-
-
-
-
Sanyo VCC-MC700P User manual
-
-
-
-
Other documents
-
Honeywell HCD484LX User manual
-
JVC TK-C1460 User manual
-
Samsung SCC-C4307N User manual
-
-
-
-
-
-
-
Eneo VKC-1340/IR12-24 Operating instructions