DaVinci CARTER'S MORGAN SIX DRAWER DRESSER Step By Step Assembly Instruction

  • Hello! I am an AI chatbot trained to assist you with the DaVinci CARTER'S MORGAN SIX DRAWER DRESSER Step By Step Assembly Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MORGAN SIX DRAWER DRESSER
PRODUCT # : 343 - 8929
JC PENNEY - PLANO TEXAS 75024
- TO PRESERVE THE LUSTER AND BEAUTY, WE RECOMMEND CLEANING THE FURNITURE REGULARLY WITH A
DAMP CLOTH FOLLOWED BY A DRY CLOTH.
- DO NOT USE WAXES OR STRONG CHEMICAL CLEANERS
PRODUCT CARE :
- MORGAN 6 DRAWER DRESSER FULLY ASSEMBLED
- 1 PACK FURNITURE TIPPING RESTRAINT
PACKAGE CONTENT :
MOVE DRAWER KNOB OUTSIDE, BY RELEASING BOLT
1.
2.
STEP BY STEP ASSEMBLY INSTRUCTION
THIS PRODUCT HAS BEEN TESTED AND COMPLIES WITH ASTM F2057-00
SUPPLIER NO. 735464
FOR MISSING PART, CONTACT MODUS FURNITURE INTL :
L.A. CA. PH.(800).827 - 2129 (8.00 AM TO 5.00 PM PST)
WALL
- YOUNG CHILDREN MAY BE INJURED BY TIPPING OF THE FURNITURE, AND THE USE OF FURNITURE TIPPING
RESTRAINT IS HIGHLY RECOMMENDED FOR PROTECTION AGAINST THE UNEXPECTED TIPPING OF FURNITURE
DUE TO IMPROPER USE.
- READ INSTALLATION INSTRUCTION BELOW AND ON PLASTIC PACK.
IMPORTANT :
BRACKET INTO
THE UNIT
ATTACH ONE OF THE MOUNTING BRACKETS SECURELY TO THE BACK
EDGE OF THE FURNITURE. USE THE SHORTER SCREWS.
DETERMINE WHERE FURNITURE IS TO BE PLACED AND MARK
LOCATION ON THE WALL FOR THE MOUNTING BRACKET SCREW
HOLE APPROXIMATELY 2 BELOW THE BRACKET MOUNTED TO THE
EDGE OF THE FURNITURE.
DRILL A 3/16 HOLE IN THE WALL. PRESS THE PLASTIC ANCHOR
INTO THE HOLE AND GENTLY TAP UNTIL THE FLANGE ON THE
ANCHOR IS AGAINST THE WALL SURFACE.
POSITION THE BRACKET ON THE ANCHOR AND USE THE LONGER
SCREW TO SECURELY ATTACH THE BRACKET TO THE WALL.
PLACE THE FURNITURE SO THE BRACKET ON THE BACK EDGE IS IN
LINE WITH THE BRACKET ON THE WALL.
LACE AN END OF THE NYLON RESTRAINT STRAP DOWN THROUGH
EACH BRACKET. BRING BOTH ENDS TOGETHER AND SLIDE THE
BEADED END OF THE STRAP THROUGH THE KEYHOLE SHAPED SLOT
IN THE OTHER END UNTIL SNUG. PULL DOWN ON THE BEADED END
UNTIL IT SNAP LOCKS INTO THE KEYHOLE SLOT.
TO DOUBLE LOCK, RETURN THE BEADED END BACK THROUGH THE
KEYHOLE AS SHOWN.
CHECK TO MAKE SURE THE STRAP IS SECURELY LACED AND LOCKED
TO THE BRACKETS.
1.
2.
3.
4.
5.
6.
7.
8.
FURNITURE TIPPING RESTRAINT INSTALLATION INSTRUCTIONS :
BRACKET INTO
THE WALL
PLASTIC
ANCHOR
2 
/