Quick Start Guide
Universal Mounting Plate
Locking Knob
Threaded Circular Plate
Ring Adapter
Large Triangle Adapter
Large Rectangle Adapter
Mounting Hardware
Blue Dot Bag
Mounting Hardware
Green Dot Bag
Mounting Hardware
Yellow Dot Bag
Velcro
PN98000027 (09/19) Rev. C)
Product Hole Pattern Hardware
• Buddy Button™
• Big Buddy™
A Found in blue dot bag.
• Specs Switch
®
B Found in blue dot bag.
• iPad Cradles C
or
D
Follow instructions included
with iDevice cradle. Hardware
included with iDevice cradle.
• Jelly Beamer™ Twist
Transmitter
• iTalk4™ with Levels
• BIG Candy Corn™
D Found in blue dot bag.
• String Switch
• Cap Switch
• Cup Switch
• LITTLE Candy Corn™
N/A Attach to plate with included
Velcro
®
.
This assembly option is a substitute for:
• Small Circular Plate #100SCMP
• Cradle Plate #10045000
Assembly Option 1
1. Using appropriate hardware
attach plate to device.
2. Attach locking knob to plate.
3. Attach plate to mounting arm.
4. Use locking knob to lock device
into place.
NOTE: Some parts will be left over
after assembly.
Assembly Option 2
This assembly option is a substitute for:
• Small Triangular Plate #100STMP
Product Hole Pattern Hardware
• Jelly Bean
®
Twist
• LITTLEmack™
• LITTLE Step-by-Step™
• LITTLE Step-by-Step with
Levels
• LITTLE Step-by-Step
Choice with Levels
• iTalk2 with Levels
N/A Found in green dot bag.
1. Insert threaded circular plate into ring adapter.
2. Using appropriate hardware attach plate to device.
3. Attach locking knob to plate.
4. Attach plate to mounting arm.
5. Use locking knob to lock device into place.
NOTE: Some parts will be left over after assembly.
Assembly Option 3
Product Hole Pattern Hardware
• Big Red
®
• Big Beamer
®
N/A Found in yellow dot bag.
• BIGmack
®
• BIG Step-by-Step™
• BIG Step-by-Step with
Levels
Found in yellow dot bag.
This assembly option is a substitute for:
• Large Triangular Plate #100LTMP
1. Insert threaded circular plate into large triangle adapter.
2. Using appropriate hardware attach plate to device.
3. Attach locking knob to plate.
4. Attach plate to mounting arm.
5. Use locking knob to lock device into place.
NOTE: Some parts will be left over after assembly.
Assembly Option 4
This assembly option is a substitute for:
• Large Rectangular Plate #100LRMP
• EZ Mount Plate #10040800
• Relax/Mini Relax Plate #66160
Product Hole Pattern Hardware
• QuickTalker™ 7, 12, or 23
• SuperTalker FT™
N/A Attach to plate with included
Velcro
®
.
Found in yellow dot bag.
1. Insert threaded circular plate into large rectangle adapter. Align the holes labeled C on the threaded circular plate to the four holes on the large rectangular adapter. The
printing on the threaded circular plate should be readable as you hold the large rectangular adapter horizontal, see example below.
2. Insert four locking pins from red dot bag into holes labeled C on the threaded circular plate. Locking pins can be removed if needed.
3. Using appropriate hardware attach plate to device.
4. Attach locking knob to plate.
5. Attach plate to mounting arm.
6. Use locking knob to lock device into place.
NOTE: Some parts will be left over after assembly.
Warranty/Repair/Return Information
AbleNet offers a limited two-year warranty on the Universal Mounting Plate.
For full warranty details, visit www.ablenetinc.com.
For more information on AbleNet products and services.
AbleNet, Inc
Minneapolis/St Paul, MN
800-322-0956 (US & Canada)
www.ablenetinc.com
© 2019 AbleNet, Inc., All Rights Reserved.
Locking pins
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
