Technical bulletin
Issue:
One or two of the Center buttons ( AUTO / DUAL / TEMP/ FAN) will drag or get stuck.
Solution:
Sand/Trim button tab (see Page 2)
or
Important Notes:
TOOL CHOICES: NAIL FILE OR MILL FILE
If center button is already installed.
FIRMLY HOLD THE ROTARY
KNOB AND PULL TO REMOVE
RPK4-HD1101
A
A
BB
TO INSTALL KNOB:
2 SMALL NOTCHES “A” HAVE
TO MATCH RIBS “B” AND PUSH
ALL THE WAY IN TO SNAP
Rev: V1 111920
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
1