Huifen Wireless Bluetooth FM Transmitter for Car, Car Kit Audio Adapter & Receiver User guide

Brand
Huifen
Model
Wireless Bluetooth FM Transmitter for Car, Car Kit Audio Adapter & Receiver
Category
FM transmitters
Type
User guide
Usage Instruction
Smart Bluetooth MP3 Car Charger
Function & Usage of Car Charger:
1. Open the package, plug into the motor’s cigarette lighter, when the red indicator on the screen
flashes, it shows the frequency point and current Car battery Voltage (Test range 0-36V).
2. Dual USB design, output: DC 5V total output current DC/5V 3100mA.External digital charging
equipment can be connected. The ”1A· ”USB can support U disk to play music.
Feature & Function:
1. Provides hands-free communication via Bluetooth link to your phone.
2. Car battery voltage automatically detected.
3. Large current car charger with dual USB.
4. Bluetooth link to your phone, support main map app and voice navigation broadcast.
5. Car MP3, pluggable U Disk/TF card to play music.
6. Bluetooth music player, support music player that comes with your phone, and compatible
with variety of music App.
7. Motor-start, automatically connected to Bluetooth, off power FM, memorized playlist.
8. Suitable for variety of famous brand mobile/iPad/GPS etc tablet charging.
9. Smart voice reminding, guide and report all kinds of working state.
Music playing method of BT-CCB-2USB Bluetooth car charger:
1.Plug it into the cigarette lighter hold of the car screen indicator flashes, can be normally used.
2.First time use, Bluetooth and your phone need to be matched, Search for connectable
Bluetooth Setting BT-X7, and match, if voice prompt Bluetooth connection is successful, then
done.
3.Music playing, click ” ” music play/pause. Playlist selection, Next click ” “ Last click “ “.
Adjust the volume, long press the “ “ to turn up the audio volume, long press the “ “ to turn
down the audio volume. Adjust the FM, click the “ “ to turn up frequency, click the “ “ to
turn down frequency. Audio source mode switching: click M Bluetooth/TF card/U disk to switch.
4.BT call, after matching successfully with Bluetooth, Incoming call, press the “ “, when on the
line, long press the “ “ to refuse the call, continuous press of the button “ “ of two times for
redial.
5.Music playing: Set the FM frequency to the same as the radio, plug the U disk, then can play the
music in the U disk, connected to the Bluetooth and open the music App of phone, and all kinds
of App of network radio to enjoy the abundant music feast (warm notice: Normally FM of the car
will automatically adjusted to the radio channel, here suggest to adjusted to the radio channel,
here suggest to adjust the FM by manual so that will not be interrupted by radio channel, and
enjoy the high quality Bluetooth call and music.
Attention Notes:
1.Working Volts: 12-24V
2.A slightly hot when at work, or stop/restart when motor-starts it is normal, please feel free to
use.
3.Please pull it out of the cigarette lighter, for long time unused.
Simple Troubleshooting:
1.If the indicator light is not on when at work, please kindly check whether the power voltage is
rated within the working voltage range or not.
2.If the indicator light and frequency are displayed but not played, please kindly check whether
the volume is adjusted to the minimum, or linked to phone Bluetooth or not.
3.When playing, noise appeared, or the sound quality is not, please try to reduce the player
volume.
  • Page 1 1
  • Page 2 2

Huifen Wireless Bluetooth FM Transmitter for Car, Car Kit Audio Adapter & Receiver User guide

Brand
Huifen
Model
Wireless Bluetooth FM Transmitter for Car, Car Kit Audio Adapter & Receiver
Category
FM transmitters
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents