Avanity ALLE-VS25-TGG-D Installation guide

ALLE-VS25-TGG-D
Avanity
Brand
Avanity
Model
ALLE-VS25-TGG-D
Type
Installation guide
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver Sealant Tape Measure Safety Glasses
10'
1
PARTS / HARDWARE (INCLUDED ONLY WITH AVANITY STONE TOPS)
500001
4x
111212
SINK INSTALLATION
3
120003
4x
Apply a continuous bead of quality sealant
to the top surface (rim) of the sink.
Turn the stone top upside down and place it on a clean,
scratch resistant surface. Center the sink over the cutout.
2
Secure the sink to the top using the mounting kit / hardware provided with the stone top, HAND TIGHTEN ONLY.
Apply bead of quality sealant evenly
along the top of the vanity.
Finally, place the bottom side of back splash with sealant onto the countertop and check
alignment of backsplash. Adjust the leg levelers as needed
4
6
5
Apply silicone sealant evenly along
the bottom of backsplash and wall.
All Sizes
INSTALLATION INSTRUCTION
STONE VANITY TOP
4x
120004
4x
**NOTE: Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only. **
SUGGESTED TOOLS AND MATERIALS / OUTILS ET MATÉRIAUX PROPOSÉES
1 2
3
INSTALLATION INSTRUCTIONS / Les instructions d'installation
Remove vanity from box and examine vanity
for any defects or damage.
Install vanity top according to manufacturer’s directions.
Carefully place vanity against wall.
For customer support, please call Avanity Corporation at 866-522-5578 weekdays 9:00 to 6:00 PST
Vanity Installation
Tape Measure / Mètre à ruban
10'
  • Page 1 1
  • Page 2 2

Avanity ALLE-VS25-TGG-D Installation guide

ALLE-VS25-TGG-D
Avanity
Brand
Avanity
Model
ALLE-VS25-TGG-D
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents