KingMi Smart Power Strip
Power button
Standard connectors
Three-level security
Two level security
Overview
Thank you for using this device. This power strip
has 3 standard connector and 3 USB ports. The
device is equipped with surge protection, it has
a protective curtains, which are used to prevent
electric shock, supports USB charging function.
Specications
Title: Qingmi Power Strip (power adapter);
Model: QMCXB33CH;
Standard: GB 2099.1-2015, GB 4943.1-2011, GB 9254-
2008, GB 17625.1-2012;
Housing material: ame-resistant polycarbonate
Size: 225x41x26 (mm);
Device Length: total length 1.8m;
Weight: 366g (. Incl cable);
Technical parameters: 2500W MAX, 10A MAX, 250V;
USB Input voltage module: 100-240V, 50 / 60Hz, 0.5A;
The output voltage of the module USB: 5V --- 1.2A;
The total output voltage of a single USB Module: 15W;
Operating temperature: -10C ~ + 40C.
Features
– Overload Protection: when the current exceeds the limit value, the device is
automatically disconnected from a power supply, thereby preventing the likelihood of
overload. After eliminating possible causes of overloading, in manual mode, you can
restore the extension work, replace the fuse.
– Double protection: double, triple protection, which do not depend on each other.
– High performance: 3 USB ports for simultaneous charging of three devices.
– Compliance with State standards, each connector can equally be used for standard
sockets with three at prongs, two forks and standard German sockets with two round
4.8mm plugs.
– Fire: The results of testing materials for re resistance meet State standards.
– The device is equipped with a chip, automatically detect the battery charging current.
USB ports
Safety
• The total capacity of all connected devices must not exceed the rated device capacity.
• It is forbidden to tie a cord, use the device in a twisted cables to avoid overheating of
the extension cord.
• A poor grounding or optional grounding can cause a dangerous situation.
• Do not use extension in rooms with high humidity.
• It is forbidden to disassemble the device.
• It is forbidden to heat the device. Install the power strip away from heat sources.
• When the device is connected, not use any items and tools to verify the reliability of
power strip protector.
• It is forbidden to disassemble, modify, repair the device.