Prime-Line J 4533 Operating instructions

Brand
Prime-Line
Model
J 4533
Type
Operating instructions

Prime-Line J 4533 Door Holder

The Prime-Line J 4533 is a door holder designed to keep doors open at a desired angle. It is constructed from durable materials to withstand everyday use and features a rubber pad on the bottom to prevent the door from slipping. The holder can be easily installed on the door frame using the included screws, and it can be adjusted to fit different door thicknesses. The holder can hold doors open at a variety of angles, making it ideal for use in a variety of applications, such as keeping doors open for ventilation or for easy access.

Prime-Line J 4533 Door Holder

The Prime-Line J 4533 is a door holder designed to keep doors open at a desired angle. It is constructed from durable materials to withstand everyday use and features a rubber pad on the bottom to prevent the door from slipping. The holder can be easily installed on the door frame using the included screws, and it can be adjusted to fit different door thicknesses. The holder can hold doors open at a variety of angles, making it ideal for use in a variety of applications, such as keeping doors open for ventilation or for easy access.

J 4533 J 4533 J 4533
Tools needed / Herramientas necesarias / Outils requis Tools needed / Herramientas necesarias / Outils requis Tools needed / Herramientas necesarias / Outils requis
Allow for firm contact with floor and
mark holes.
Permita que haga contacto firme con
el piso y marque los orificios.
Assurez-vous du contact ferme avec
le plancher et marquez les orifices.
Allow for firm contact with floor and
mark holes.
Permita que haga contacto firme con
el piso y marque los orificios.
Assurez-vous du contact ferme avec
le plancher et marquez les orifices.
Allow for firm contact with floor and
mark holes.
Permita que haga contacto firme con
el piso y marque los orificios.
Assurez-vous du contact ferme avec
le plancher et marquez les orifices.
INSTALLATION HINTS: Locate holder bracket 1/4" from
edge of door (latch side). Before mounting, check open door
positions with holder extended to determine vertical position.
Mark screw holes on door allowing rubber pad to make firm
contact with floor.
CONSEJOS PARA LA INSTALACION: Localice el sostén
agarrador a 6 mm de la orilla de la puerta (lado del cerrojo).
Antes de montarse - chequee las “posiciones abiertas de la
puerta” con el agarrador extendido, para determinar el local
vertical exacto del sostén agarrador de la puerta. Marque los
hoyos del tornillo agarrador en la puerta para permitir que la
defensa de hule haga un buen contacto con el piso.
CONSEILS D'INSTALLATION: Situez le support de cale-porte
à 6 mm du bord de la porte (côté loquet). Vérifiez, avant de
procéder au montage, les positions de porte ouverte et le
cale-porte complètement étendu afin d'en déterminer la
position verticale. Marquez les orifices des vis sur la porte
en laissant le tampon de caoutchouc établir un contact
ferme avec le sol.
INSTALLATION HINTS: Locate holder bracket 1/4" from
edge of door (latch side). Before mounting, check open door
positions with holder extended to determine vertical position.
Mark screw holes on door allowing rubber pad to make firm
contact with floor.
CONSEJOS PARA LA INSTALACION: Localice el sostén
agarrador a 6 mm de la orilla de la puerta (lado del cerrojo).
Antes de montarse - chequee las “posiciones abiertas de la
puerta” con el agarrador extendido, para determinar el local
vertical exacto del sostén agarrador de la puerta. Marque los
hoyos del tornillo agarrador en la puerta para permitir que la
defensa de hule haga un buen contacto con el piso.
CONSEILS D'INSTALLATION: Situez le support de cale-porte
à 6 mm du bord de la porte (côté loquet). Vérifiez, avant de
procéder au montage, les positions de porte ouverte et le
cale-porte complètement étendu afin d'en déterminer la
position verticale. Marquez les orifices des vis sur la porte
en laissant le tampon de caoutchouc établir un contact
ferme avec le sol.
INSTALLATION HINTS: Locate holder bracket 1/4" from
edge of door (latch side). Before mounting, check open door
positions with holder extended to determine vertical position.
Mark screw holes on door allowing rubber pad to make firm
contact with floor.
CONSEJOS PARA LA INSTALACION: Localice el sostén
agarrador a 6 mm de la orilla de la puerta (lado del cerrojo).
Antes de montarse - chequee las “posiciones abiertas de la
puerta” con el agarrador extendido, para determinar el local
vertical exacto del sostén agarrador de la puerta. Marque los
hoyos del tornillo agarrador en la puerta para permitir que la
defensa de hule haga un buen contacto con el piso.
CONSEILS D'INSTALLATION: Situez le support de cale-porte
à 6 mm du bord de la porte (côté loquet). Vérifiez, avant de
procéder au montage, les positions de porte ouverte et le
cale-porte complètement étendu afin d'en déterminer la
position verticale. Marquez les orifices des vis sur la porte
en laissant le tampon de caoutchouc établir un contact
ferme avec le sol.
1/4"
6 mm
1/4"
6 mm
1/4"
6 mm
4"
10.2 cm
4"
10.2 cm
4"
10.2 cm
1-5/32" H.C.
2.9 cm
1-5/32" H.C.
2.9 cm
1-5/32" H.C.
2.9 cm
  • Page 1 1

Prime-Line J 4533 Operating instructions

Brand
Prime-Line
Model
J 4533
Type
Operating instructions

Prime-Line J 4533 Door Holder

The Prime-Line J 4533 is a door holder designed to keep doors open at a desired angle. It is constructed from durable materials to withstand everyday use and features a rubber pad on the bottom to prevent the door from slipping. The holder can be easily installed on the door frame using the included screws, and it can be adjusted to fit different door thicknesses. The holder can hold doors open at a variety of angles, making it ideal for use in a variety of applications, such as keeping doors open for ventilation or for easy access.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents