Toro 42in and 50in Twin Bagger, TimeCutter Z4000 and Z5000 Series Riding Mower User manual
- Category
- Lawnmowers
- Type
- User manual
This manual is also suitable for
FormNo.3359-984RevB
42inand50inTwinBagger
forTimeCutter
®
Z4000andZ5000Series
RidingMower
ModelNo.79324—SerialNo.280000001andUp
Registeratwww.T oro.com.OriginalInstructions(EN)
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoidinjury
andproductdamage.Youareresponsibleforoperating
theproductproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comfor
productandaccessoryinformation,helpndinga
dealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineToroparts,or
additionalinformation,contactanAuthorizedService
DealerorToroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(Figure2),whichsignalsahazardthatmaycauseserious
injuryordeathifyoudonotfollowtherecommended
precautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2otherwordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Introduction.................................................................2
Safety...........................................................................3
SafetyandInstructionalDecals.............................3
Setup............................................................................4
1InstallingtheWeight..........................................5
2InstallingtheBaggerFrame................................6
3AssemblingtheBaggerTop................................6
4InstallingtheBaggerTop...................................7
5InstallingtheChuteOn42InchDecks................8
6InstallingtheChuteon50inchDecks...............10
7InstallingtheDischargeTube...........................11
Operation...................................................................12
EmptyingtheGrassBags....................................12
ClearingObstructionsfromtheBagger...............12
RemovingtheBagger.........................................13
OperatingTips...................................................13
Maintenance...............................................................15
RecommendedMaintenanceSchedule(s)................15
InspectingtheBaggerAttachment......................15
InspectingtheMowerBlades..............................16
CaringfortheGrassBags...................................16
CleaningtheBaggerAttachment.........................16
Storage.......................................................................16
StoringtheBaggerAttachment...........................16
©2008—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA.
AllRightsReserved
Safety
Enginescanbecomehotwhentheyare
operating.Severeburnscanoccurfrom
contactinghotsurfaces.
Allowengines,especiallythemufer,tocool
beforetouching.
Debris,suchasleaves,grass,orbrushcancatch
re.Areintheengineareacancausepersonal
injuryandpropertydamage.
•Keeptheengineandmuferareafreeof
debrisaccumulation.
•Takecarewhenopeningthebaggercover
tokeepdebrisfromfallingontotheengine
andmuferarea.
•Allowthemachinetocoolbeforestoringit.
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaof
potentialdanger.Replaceanydecalthatisdamagedorlost.
109-6809
1.Crushinghazardofhand—donotremovethewholebaggerfromthemachine;openthebaggertopandthenremovethebag(s)
fromthebagger.Donotremovethebaggertopwhenitisclosed;openthebaggertopandthenremoveit.
110-6691
1.Thrownobjecthazard—keepbystandersasafedistance
fromthemachine.
2.Thrownobjecthazard,mower—donotoperatethewithout
deectororgrasscollectionsysteminplace.
3.Cutting/dismembermentofhandorfoot—stayawayfrom
movingparts.
3
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Weight2
U-pin2
Clevispin
2
Washer6
1
Hairpin6
Installtheweight.
BaggerQuickAttachBracket
1
Clevispin(5/16x2-1/4inch)
1
Hairpin3
Rod2
2
Washer2
Installthebaggerframe.
Baggertop1
3
Baggerscreen1
Assemblethebaggertop.
Bagger1
4
GrassBag
2
Installthebaggertop.
Bafecutoff
1
5
Chutefor42inchdecks
1
Installthechuteon42inchdecksonly.
Bafecutoff
1
Clipassembly(50indecksonly)
1
Locknut(5/16inch)
2
6
Chutefor50inchdecks
1
Installthechuteanddischargetube.
7
Dischargetube1Installthedischargetube.
4
1
InstallingtheWeight
Partsneededforthisprocedure:
2Weight
2U-pin
2
Clevispin
6Washer
6Hairpin
Procedure
Thebaggerchangestheweightdistributionof
themachine.Operatingthemachinewithout
thefrontweightsmaycauseanunstable
conditionwhichcouldresultinalossofcontrol.
Ensurethefrontweightsareproperlyinstalled
beforeoperatingthemachinewiththebagger
attachment.
Attachtheweightstothefrontofthemachineframe
withtwoU-pins,twoclevispins,sixwashers(.531x
1.063),andsixhairpinsasshowninFigure3.
Figure3
1.Frontweight4.Washer
2.U-pin
5.Clevispin
3.Hairpin
Important:Whenyouremovethetwinbagger,
remembertoremovethefrontweights.
5
2
InstallingtheBaggerFrame
Partsneededforthisprocedure:
1
BaggerQuickAttachBracket
1
Clevispin(5/16x2-1/4inch)
3Hairpin
2Rod
2Washer
Procedure
1.Atthebackofthemachine,installthebaggerframe
tothesquareslotintheframe.
2.Securethebaggerframewithaclevispin(5/16x
2-1/4inch)andhairpin(Figure4).
Figure4
1.Baggerframe3.Clevispin(5/16x2-1/4
inch)
2.Hairpin
3.Installtworods,onetoeachsideofthebagger
frame.Locatetheexistingslottedbracketbetween
thereardrivewheelandframe.Startthearedend
oftherodintotheopeningintheslotandslidethe
rodrearward(Figure4).
G005664
1
2
3
4
5
6
7
8
Figure5
1.Rod
5.Bentendofrod
2.Slottedbracket6.Baggerframe
3.Openinginslot
7.Washer
4.Flaredendofrod
8.Hairpin
4.Insertthebentendsoftherodintothebaggerframe
asshowninFigure4.Securethebothendsofthe
rodswithhairpins.
3
AssemblingtheBaggerTop
Partsneededforthisprocedure:
1Baggertop
1Baggerscreen
Procedure
Turnthebaggertopover.Installthescreenasshownin
Figure6soitslopesdowntowardthecollectionbags.
Makesurethescreenssnapintoplaceandthetabs
engagethebaggertop.
6
G005666
1
2
3
4
Figure6
1.Baggertop
3.Screentab
2.Screen4.Slotinbaggertop
4
InstallingtheBaggerTop
Partsneededforthisprocedure:
1Bagger
2
GrassBag
Procedure
1.Installthebaggertoptothebaggerframe.Rotate
thebaggertoptoalignthekeyholesinthebagger
topbracketswiththekeysinthepostsonthebagger
frame(Figure7).Slidethebracketsovertheposts
androtatethebaggertopdowntotheoperating
position.
Note:Thebaggertopiseasiertoinstalliftwo
peopleworktogether.
G005665
1
2
3
4
5
6
Figure7
1.Baggertop4.Bracket,baggertop
2.Baggerframe
5.Key
3.Keyhole6.Post
7
2.Liftthebaggertopandinstallthebagsbysliding
thebagframehooksontotheretainingbrackets
(Figure8).
G005672
1
2
3
4
Figure8
1.Bag3.Retainingbracket
2.Baggerframe4.Bagframehook
3.Lowerthebaggertopontothebag(Figure9).
G005757
Figure9
5
InstallingtheChuteOn42Inch
Decks
Partsneededforthisprocedure:
1
Bafecutoff
1
Chutefor42inchdecks
Procedure
UsethisprocedurewheninstallingtheTwinBaggerKit
onmachineswith42inchdecks.ToinstalltheTwin
BaggerKitonmachineswith50inchdecksproceedto
thenextsetupprocedure.
1.Liftupthegrassdeectorandlocatethelocknuton
thedeectorpivotrod.Removetheexistingthin
nut(3/8inch).
2.Installthecutoffbafetotheexposedpivotrod
(Figure10).Usetheexistingthinnut(3/8inch)to
securethebafetothemower.
G005667
1
2
3
Figure10
42InchDeck
1.Deectorpivotrod3.Thinnut(3/8inch)
2.Cutoffbafe
3.Torquethefastenerto14-18ft-lb(7-9N-m).
8
4.Anglethemetaltabatthefrontofthechuteintothe
slotinthebracketweldedtothemowerdeckjustin
frontofthecutoff(Figure11).
G005669
1
2
3
Figure11
1.Chute4.Deectorrod
2.Lockingpin5.Flexiblelatch
3.Rearhook6.Notchedbracket
5.Pivotthechutebackandtowardthedecksochuteis
ushwiththemowerdeck(Figure11).
Note:Makesuretheretaininghookonthe42inch
chuteisoutofthewaysothechuteopeningmounts
ushtothedeck.
6.Securethechutetothe42inchdeck.Hookthe
exiblelatchonthechutetotheretainingclasp
weldedonthemowerdecktotherearoftheopening
(Figure12).Fastentheretaininghookaroundthe
pivotrodtosecurethechuteintoposition.
G005670
1
2
3
4
5
Figure12
1.Chute42inchdecks
4.Retaininghook
2.Flexiblelatch5.Pivotrod
3.Retainingclasp
9
6
InstallingtheChuteon50inch
Decks
Partsneededforthisprocedure:
1
Bafecutoff
1
Clipassembly(50indecksonly)
2
Locknut(5/16inch)
1
Chutefor50inchdecks
Procedure
UsethisprocedurewheninstallingtheTwinBaggerKit
onmachineswith50inchdecks.
1.Liftupthegrassdeector.Installtheclipassembly
tothetwoholesalongthedeckcutout.
2.Installthecutoffbafetotheclipassemblyposts.
Figure13.Usethetwolocknuts(5/16inch)to
securethebafetothemower.
G005668
1
2
3
Figure13
50InchDeck
1.Clipassembly3.Locknut(5/16inch)
2.Cutoffbafe
3.Torquethefastenerto14-18ft-lb(7-9N-m).
4.Anglethemetaltabatthefrontofthechuteintothe
slotinthebracketweldedtothemowerdeckjustin
frontofthecutout(Figure14).
G005669
1
2
3
Figure14
1.Chute
3.Weldedbracket
2.Metaltab
5.Pivotthechutebackandtowardthedecksochuteis
ushwiththemowerdeck(Figure14).
Note:Asthechutemateswiththedeck,makesure
theedgeofthe50inchchuteisunderthelipofthe
clipassemblyinstalledpreviously.
10
6.Onthetopofthechute,engagethehookshaped
latcharoundpivotrodofthedeectorassemblyas
showninFigure15.
G005850
1
2
3
4
Figure15
1.50inchchute3.Latch,hook
2.Deector
4.Pivotrod
7.Securethechutetothe50inchdeck.Hookthe
exiblelatchonthechutetotheretainingclasp
weldedonthemowerdecktotherearoftheopening
(Figure16).
G005756
1
2
3
Figure16
1.Chute50inchdecks
3.Retainingclasp
2.Flexiblelatch
7
InstallingtheDischargeTube
Partsneededforthisprocedure:
1Dischargetube
Procedure
1.Slidethecurvedendofthedischargetubeintothe
openinginthebaggertop(Figure17).
G005671
1
2
3
4
5
Figure17
1.Dischargetube,curved
end
4.Peg
2.Openinginbaggertop
5.Rubberstrap
3.Dischargetube,aredend
2.Slidethearedendofthedischargetubeoverthe
endofthechute.Movetherubberretainingstrapon
thechutesnapsoverthepegonthedischargetube
tosecureit(Figure17).
11
Operation
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
Toavoidpersonalinjury,followthese
procedures:
•Becomefamiliarwithalloperatingand
safetyinstructionsinthe
Operator’ s Man ual
forthemowerbeforeusingthisattachment.
•Neverremovethedischargetube,bags,
baggertop,orthechutewhiletheengineis
running.
•Alwaysshuttheengineoffandwaitforall
movingpartstostopbeforeclearingan
obstructionfromthebaggingsystem.
•Neverdomaintenanceorrepairswhilethe
engineisrunning.
EmptyingtheGrassBags
Becarefulwhenliftingorhandlingagrassbagthatis
full.Toemptythegrassbags:
1.Parkthemachineonalevelsurfaceanddisengage
thebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
parkposition,stoptheengine,removethekey,and
waitforallmovingpartstostopbeforeleavingthe
operatingposition.
3.Open(raise)thebaggertop(Figure18).
G005758
Figure18
4.Compressdebrisintothebags.Withbothhands,
liftuponthebagandunhookitfromtheretaining
bracket.Emptythebag.Repeattheprocedurefor
theotherbag.
5.Installthebagsbyslidingthebagframehooksonto
theretainingbrackets(Figure19).
G005672
1
2
3
4
Figure19
1.Bag3.Retainingbracket
2.Baggerframe4.Bagframehook
6.Lowerthebaggertopontothebags.
ClearingObstructionsfrom
theBagger
1.Parkthemachineonalevelsurfaceanddisengage
thebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
parkposition,stoptheengine,removethekey,and
waitforallmovingpartstostopbeforeleavingthe
operatingposition.
3.Checkthegrassbagsandemptythemiftheyarefull.
4.Removeandseparatethedischargetubeandchute
fromthebaggertopandmower.Usingastick
orsimilarobject,carefullyremoveandclearthe
obstructionfromthemower,dischargetube,chute,
andthebaggertop.
5.Afteryouremovetheobstruction,installthe
completebaggersystemandresumeoperation.
12
RemovingtheBagger
Failingtoremovethefrontbaggerweights
andoperatingthemachinewithoutthebagger
attachmentmaycauseanunstablecondition
whichcouldresultinalossofcontrol.
•Alwaysremovethefrontweightswhen
removingthebaggerattachment.
•Neveroperatethemachinewithoutthe
baggerattachmentandthefrontweights
stillinstalled.
ThebaggercanberemovedbyrepeatingtheSetup
sectioninreverseorder.Alwaysremovethefront
baggerweightswhenremovingthebaggerattachments.
Note:Itisonlynecessarytoremovethecutoffbafe
wheninstallingamulchingkit.
OperatingTips
TipsforBagging
Size
Rememberthatthemowerislongerandwiderwiththis
attachmentinstalled.Byturningtoosharplyinconned
placesyoumaydamagetheattachment.
Trimming
Alwaystrimwiththeleftsideofthemower.Donot
trimwiththerightsideofthemowerbecauseyoucould
damagethebagger’schuteanddischargetube.
CuttingHeight
Donotsetthemowercuttingheighttoolowbecause
longgrasssurroundingthemowercanpreventairfrom
gettingunderthemowerandenteringthebagging
system.Ifenoughairdoesn’tgetunderthemower,the
baggingsystemwillplug.
CuttingFrequency
Cutthegrassoften,especiallywhenitgrowsrapidly.
Youwillhavetocutyourgrasstwiceifitgetsexcessively
long.
CuttingTechnique
Forbestlawnappearance,besuretoslightlyoverlap
themowerintothepreviouslycutarea.Thishelps
reducetheloadontheengineandreducesthechance
ofpluggingthechuteanddischargetube.
BaggingSpeed
Mostoftenyouwillbagwiththemowerthrottlein
theFastpositionanddriveatanormalgroundspeed.
However,inextremelydryanddustygrass,youmay
wanttoslightlyreducethethrottlespeedandincrease
thegroundspeedofthemower.Thebaggingsystem
mayplugifyoudrivetoofastandtheenginespeed
getstooslow.Onhillsitmaybenecessarytoslowthe
mowergroundspeed.Thishelpsmaintaintheengine
speedandbaggingefciency.Mowdownhillwhenever
possible.
Asthebaggerlls,extraweightisaddedto
thebackofthemachine.Ifyoustopandstart
suddenlyonhills,youmaylosesteeringcontrol
orthemachinemaytip.
•Donotstartorstopsuddenlywhengoing
uphillordownhill.Avoiduphillstarts.
•Ifyoudostopthemachinewhengoing
uphill,disengagethebladecontrol.Then
backdownthehillusingaslowspeed.
•Donotchangespeedsorstoponslopes.
•Neveroperatethemachinewithoutthe
baggerattachmentandthefrontweights
stillinstalled.
BaggingLongGrass
BaggingLongGrassExcessivelylonggrassisheavyand
maynotbepropelledcompletelyintothegrassbags.If
thishappens,thedischargetubeandchutemayplug.
Toavoidpluggingthebaggingsystem,mowthegrass
atahighheightofcut,thenlowerthemowertoyour
normalcuttingheightandrepeatthebaggingprocess.
BaggingWetGrass
Alwaystrytocutgrasswhenitisdrybecauseyour
lawnwillhaveaneatappearance.Ifyoumustcutwet
grass,usetheconventionalsidedischargefeatureofthe
mower.Severalhourslater,whentheclippingsaredry,
installthecompletebaggerattachmentandvacuumup
thegrassclippings.
13
SignsofPlugging
Asyouarebagging,asmallamountofgrassclippings
normallyblowoutthefrontofthemower.Anexcessive
amountofclippingsblowingoutindicatesthatthebags
arefullorthesystemisplugged.
14
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst10hours
•Inspectthebagger
Beforeeachuseordaily
•Cleanthebagger
Beforestorage
•Inspectthebagger
•Cleanthebagger
Ifyouleavethekeyintheignitionswitch,someonecouldaccidentlystarttheengineandseriously
injureyouorotherbystanders.
Removethekeyfromtheignitionanddisconnectthewirefromthesparkplugbeforeyoudoany
maintenance.Setthewireasidesothatitdoesnotaccidentallycontactthesparkplug.
Enginescanbecomehotwhentheyareoperating.Severeburnscanoccurfromcontactinghotsurfaces.
Allowengines,especiallythemufer,tocoolbeforetouching.
Debris,suchasleaves,grass,orbrushcancatchre.Areintheengineareacancausepersonal
injuryandpropertydamage.
•Keeptheengineandmuferareafreeofdebrisaccumulation.
•Takecarewhenopeningthebaggercovertokeepdebrisfromfallingontotheengineandmufer
area.
•Allowthemachinetocoolbeforestoringit.
InspectingtheBagger
Attachment
ServiceInterval:Aftertherst10hours
Beforestorage
Inspectthebaggerattachmentaftertherst10hoursof
operation,andmonthlythereafter.
1.Checkthechute,dischargetube,andthebaggertop.
Replacethesepartsiftheyarecrackedorbroken.
2.Tightenallnuts,bolts,andscrews.
3.Inspectallfastenersandlatches;replaceanymissing
ordamaged.
4.Inspectthegrassbagsfordeterioration.
15
Youorbystanderscouldbeseverelyinjuredby
yingdebrisorthrownobjectsthatmaypass
throughtorn,worn,ordeterioratedgrassbags.
•Frequentlycheckthegrassbagsforholes,
rips,wear,andotherdeterioration.
•Donotwashthegrassbags.
•Ifthebaghasdeteriorated,installnewgrass
bagssuppliedbythemanufacturerofthis
baggerattachment.
InspectingtheMowerBlades
Inspectthemowerbladesregularlyandwhenevera
bladestrikesaforeignobject.
Ifthebladesarebadlywornordamaged,installnew
blades.RefertoyourmowerormowerOperator’sManual
forcompleteblademaintenance.
CaringfortheGrassBags
Washingthegrassbagsisnotrecommended.
Topreventrapiddeteriorationofthebagmaterial,store
thebagswheretheywilldrycompletelyaftereachuse.
CleaningtheBagger
Attachment
ServiceInterval:Beforeeachuseordaily
Beforestorage
1.Aftereachuse,removeandwashtheinsideand
outsideofthebaggertop,dischargetube,chute,and
theundersideofthemower,usingwatersprayed
fromagardenhose.Useamildautomotivedetergent
toremovestubborndirt.
2.Makesureyouremovemattedgrassfromallparts.
3.Afterwashing,letallofthepartsdrythoroughly.Do
notwashthegrassbags.
Storage
StoringtheBaggerAttachment
1.Cleanthebaggerattachment;refertoCleaningthe
BaggerAttachment.
2.Inspectthebaggerattachmentfordamage;referto
InspectingtheBaggerAttachment.
3.Makesurethegrassbagsareemptyandthoroughly
dry.
4.Storethebaggerinaclean,dryplace,outofdirect
sunlight.Thisprotectstheplasticpartsandextends
thelifeofthebagger.Ifyoumuststorethebagger
outside,coveritwithaweatherproofcover.
16
Notes:
17
Notes:
18
Notes:
19
TITAN Z and
TimeCutter
Z Mowers
The Toro Total Coverage Guarantee
A Three-Year Limited Warranty (Limited Warranty for
Commercial Use)
Conditions and Products Covered
The Toro Company and its afliate, Toro Warranty Company,
pursuant to an agreement between them, jointly promise to
repair any Toro Product used for normal residential purposes*
if defective in materials or workmanship. The following time
periods apply from the date of purchase:
Products Warranty Period
TITAN Z
Mowers and Attachments
TimeCutter Z
Mowers and Attachments
All Batteries
3 year limited warranty
3 year limited warranty
1 year limited warranty
This warranty includes the cost of parts and labor, but you must
pay the cost of transportation to and from the servicing dealer.
This warranty applies to consumer TITAN Z and TimeCutter Z
mowers and attachments.
* Normal residential purposes means use of the product on
the same lot as your home. Use at more than one location is
considered commercial use, and the commercial use warranty
would apply.
Limited Warranty for Commercial Use
Toro Consumer Products and attachments used for commercial,
institutional, or rental use are warranted against defects in
materials or workmanship for the following time periods from the
date of purchase:
Products Warranty Period
Air Cooled Gas Engines 90 day limited warranty
All other items 30 day limited warranty
Instructions for Obtaining Warranty Service
If you think that your Toro Product contains a defect in materials
or workmanship, follow this procedure:
1. Contact any Toro Authorized or Master Service Dealer
to arrange service at their dealership. To locate a dealer
convenient to you, refer to the Yellow Pages of your
telephone directory (look under “Lawn Mowers") or access
our web site at www.Toro.com. U.S. Customers may also
call toll free: 866-854–9035 to use our 24-hour Toro dealer
locator system.
2. Bring the product and your proof of purchase (sales receipt)
to the Service Dealer.
If for any reason you are dissatised with the Service Dealer’s
analysis or with the assistance provided, contact us at:
Customer Care Department, Consumer Division
Toro Warranty Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Toll Free: 866-216-6029 (U.S. customers)
Toll Free: 866-216-6030 (Canada customers)
Owner Responsibilities
You must maintain your Toro Product by following the
maintenance procedures described in the Operator’s Manual .
Such routine maintenance, whether performed by a dealer or by
you, is at your expense.
Items and Conditions Not Covered
There is no other express warranty except for special emission
system coverage on some products. This express warranty does
not cover:
• Cost of regular maintenance service or parts, such as lters,
fuel, lubricants, tune-up parts, blade sharpening, brake and
clutch adjustments.
• Any product or part which has been altered or misused
or required replacement or repair due to normal wear,
accidents, or lack of proper maintenance.
• Repairs necessary due to improper fuel, contaminants in the
fuel system, or failure to properly prepare the fuel system
prior to any period of non-use over three months.
• Pickup and delivery charges to and from an Authorized Toro
Service Dealer.
General Conditions
All repairs covered by this warranty must be performed by an
Authorized Toro Service Dealer using Toro approved replacement
parts.
Repair by an Authorized Toro Service Dealer is your sole
remedy under this warranty.
Neither The Toro Company nor Toro Warranty Company
is liable for indirect, incidental or consequential
damages in connection with the use of the Toro Products
covered by this warranty, including any cost or expense
of providing substitute equipment or service during
reasonable periods of malfunction or non-use pending
completion of repairs under this warranty.
Some states do not allow exclusion of incidental or
consequential damages, so the above exclusion and
limitations may not apply to you.
This warranty gives you specic legal rights, and you
may also have other rights which vary from state to
state.
Countries Other than the United States or Canada
Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor
(Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatised with your Distributor’s
service or have difculty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us
at Toro Warranty Company.
374-0124 Rev B
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Toro 42in and 50in Twin Bagger, TimeCutter Z4000 and Z5000 Series Riding Mower User manual
- Category
- Lawnmowers
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toro Bagger, TITAN Zero-Turn-Radius Riding Mower User manual
-
-
Toro 32in Bagger, 2011 and After TimeCutter 3000 Series Riding Mower User manual
-
-
-
-
-
-
-