2. Toro
  3. High-Lift Blade and Baffle Kit, 2012 TimeMaster Lawn Mower

Toro High-Lift Blade and Baffle Kit, 2012 TimeMaster Lawn Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro High-Lift Blade and Baffle Kit, 2012 TimeMaster Lawn Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3379-433RevA
High-LiftBladeandBafeKit
2012TimeMasterLawnMower
ModelNo.127-6879
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Important:Youwillneedatorquewrenchtoinstallthebladesproperly.Ifyoudonothaveatorquewrenchorare
uncomfortableperformingthisprocedure,contactanAuthorizedServiceDealer.
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Lockthehandleintheverticalposition(Figure1);refer
toAdjustingtheHandleHeightintheOperator’sManual.
1
g024066
Figure1
1.Handlelockedintheverticalposition
2.Disconnectthewirefromthesparkplug.
WARNING
Thebladesaresharp;contactingabladecould
resultinseriouspersonalinjury.
•Disconnectthewirefromthesparkplug.
•Weargloveswhenservicingtheblade.
3.Tipthemachineontoitsside,withthedipstickdown,
untiltheupperhandlerestsontheground.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3379-433*A
2
RemovingtheExistingBlades
NoPartsRequired
Procedure
1.Useablockofwoodtoholdeachbladesteady,andturn
thebladeboltcounterclockwiseasshowninFigure2.
Figure2
2.RemoveeachbladeasshowninFigure3.
G016530
1
2
3
4
Figure3
1.Spindle(2)3.Blade(2)
2.Bladedriver(2)4.Bladebolt(2)
3
InstallingtheBafe
Partsneededforthisprocedure:
1
Bafe
Procedure
1.Removethe4boltsand4nutsinthefrontofthe
machinehousing(Figure4).
Figure4
1.Bolt(4)3.Nut(4)
2.Bafe
2.Installthebafewiththe4boltsand4nutsthatyou
removedinstep1(Figure4).
2
4
InstallingtheHigh-liftBlades
Partsneededforthisprocedure:
2
High-liftblade
Procedure
1.Installtherstbladesothatitishorizontal,alongwith
allmountinghardwareasshowninFigure3.
Note:Tightentheboltwithyourngers.
Important:Positionthecurvedendsoftheblades
topointtowardthemachinehousing.Nestthe
raisedareasoneachbladedriverwiththerecesses
intheheadofitscorrespondingspindle,andnest
thepinsontheothersideofeachbladedriverwith
theholesinitscorrespondingblade.
2.Steadythebladewithablockofwood,andturnthe
bladeboltclockwisewithatorquewrenchasshown
inFigure5.
Note:Torquethebladeboltto82N-m(60ft-lb).
Important:Abolttorquedto82N-m(60ft-lb)is
verytight.Putyourweightbehindthewrenchand
tightentheboltsecurely.Thisboltisverydifcult
toovertighten.
g016537
Figure5
3.Rotatetheinstalledblade1/4turnuntilitisvertical.
4.Installtheotherbladeinthesamemannerastherst
blade(refertosteps1and2).
Note:Thebladesshouldbeperpendicular,forming
aninverted“T”asshowninFigure6.
1
G016536
Figure6
1.Blade(2)
5.Tightenthesecondblade;refertostep2.
6.Rotatethebladesbyhandafull360°turntoensure
thattheydonottouch.
Note:Ifthebladestoucheachother,theyarenot
mountedcorrectly.Repeatthisprocedureuntilthe
bladesnolongertoucheachother.
WARNING
Incorrectlyinstallingthebladescoulddamagethe
machineorcauseaninjurytotheoperatororto
bystanders.
5
ReplacingtheSide-discharge
Door
Partsneededforthisprocedure:
1
Side-dischargedoor
1
Spring
Procedure
1.Removethe2hex-headbolts(3/8-inch)thatsecurethe
side-discharge-doorassemblyontothemowerhousing
(
Figure7),andremovetheside-dischargedoorfrom
themachine.
Note:Donotdiscardtheboltsorthedoorassembly.
3
g024067
1
2
Figure7
1.Hex-headbolts
2.Side-dischargeopening
2.Prytherodoutofthespringontheside-discharge
doorwithalarge,at-headscrewdriversothatthe
otherendoftherodisbeyondtheopeningintheend
ofthedoorhinge(Figure8).
G024028
Figure8
3.Grasptheexposedendoftherodwithapliersand
removetherod.
Note:Donotdiscardtherod.
4.Removethespringandthebracketfromthe
side-dischargedoor.
Note:Donotdiscardthebracketorthe2hex-head
bolts.
5.Assemblethebracket,thenewspring,andtherodonto
thenewside-dischargedoor.
Note:Insertalegofthespringintotheopeningof
thedoorinthelocationshownin
Figure9.
1
g024068
Figure9
1.Insertthelegofthespringhere.
6.Wedgetheside-discharge-doorassemblyopenwith
alargescrewdriversothatyoucaninstallthedoor
assemblyontothemowerhousing(Figure10).
G024031
Figure10
7.Returnthemachinetotheoperatingposition.
8.Positionthedoorassemblyontothehousing,andload
thespringbysettingthefreespringlegontothemower
housing.
9.Alignthe2holesofthebracketofthedoorassembly
withthe2holesinthemowerhousing.
10.Securethedoorassemblytothemowerhousingwith
the2hex-headboltspreviouslyremoved.
Note:Tightenthehex-headboltssecurely.
11.Removethescrewdriverfromtheside-dischargedoor
andallowthedoortoclose.
12.Connectthewiretothesparkplug.
4
/