Toro High-Rise Kit, HoverPro 450 Machine Installation guide

Type
Installation guide

This manual is also suitable for

FormNo.3371-473RevD
High-RiseKit
HoverPro450
ModelNo.02619
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Extensionbumper1
Spacer
10
Nylonscrew10
Rubberwasher10
Nylonnut10
Installthekit.
Note:Pleaserefertothesafetyandoperatinginstructionsin
theOperator’sManualbeforettingandusingthiskit.
Thisproductadds35mm(1.4in)totheheightofcut.
1.Disconnectthewirefromthesparkplug.
2.Drainallthefuelandtheoilfromtheengine;referto
yourOperator’sManual.
3.TurnthefuelswitchtotheOffposition.
4.TurntheHoverProdeckupsidedownandsetblocks
underneaththedecktopreventitfromtilting.
WARNING
Thebladeissharp;contactingtheblademay
resultinseriouspersonalinjury.
Keepawayfromthebladewhenyouturnthe
HoverProdeckupsidedown.
5.Installtheextensionbumperoverthedeckasshown
inFigure1.
6.Usetheextensionbumperasatemplateandmark
thelocationofeachofthe10holesinthebumper
extensionontotheHoverProdeck.
7.Removetheextensionbumperanddrill10holes(8.5
mmdiameter)inthelocationsshowninFigure1.
Note:Weareyeprotectionwhendrillingtheholes.
8.SecuretheextensionbumpertotheHoverProdeck
usingthefastenersandspacersfrominthekitasshown
inFigure1.
Note:Usetherubberwasherstoholdthenylon
screwsinpositiontomaketheinstallationeasier.
Figure1
1.Nylonnut(10)5.Extensionbumper(1)
2.HoverProdeck(1)6.Rubberwasher(10)
3.Drill8.5mmhole(10)7.Nylonscrew(10)
4.Spacer(10)
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUK
AllRightsReserved
*3371-473*D
  • Page 1 1

Toro High-Rise Kit, HoverPro 450 Machine Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI