2. Simrad
  3. IDS Experience-Based

Simrad IDS Experience-Based, IDS Experience-Based Interface Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Simrad IDS Experience-Based Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
|
1
IDS Experience-Based Interface | Quick Guide - EN
IDS Experience-Based
Interface
Quick Guide
Panel overview
D
A
BC
E
F
BC
G
A Home page button
B Application panel
C Panel buttons
D Activity bar
E Control bar
F Instrument bar
G Edit activity button
Panel buttons
Tap the application panel to display buttons. Panel buttons depend on application and
disappear when no panel interaction occurs over time.
Menu button
Overlay button
Cursor button: activate and clear cursor
Orientation button
EN
2
|
IDS Experience-Based Interface | Quick Guide - EN
Activity modes
To open an activity mode: select a button on the activity bar.
An activity mode displays apps based on the predefined settings for an activity.
The Home page
F
A
G
C
D
BE
H
A Settings button
B Toolbar
C Application buttons
D Status bar
E Close button
F System Controls button
G Favorites
H Man Over Board (MOB) button
The MOB mark
To create a MOB mark: press the MOB button.
To stop displaying navigational information to the MOB waypoint: cancel the navigation
from the menu.
|
3
IDS Experience-Based Interface | Quick Guide - EN
The System controls dialog
Used for quick access to system settings.
Activate the dialog by:
• Pressing the System Controls button.
• Swiping from the top of the screen.
¼ Note: Available icons depend on connected equipment and active panel.
Charts
• Zoom the chart by using spread or pinch
gestures or by using the zoom buttons.
• Move the view in any direction by panning
the chart.
• Display information about a chart item by
tapping the item.
Waypoints
To create a waypoint: select the new waypoint option in the menu.
¼ Note: With cursor inactive, the waypoint is placed at vessel’s position. With cursor
active, the waypoint is placed at selected cursor position.
Echosounder
• Zoom the image by using the zoom buttons.
• View echosounder history by panning the
image.
• Adjust gain and color using the slide bar in the
menu.
• Toggle auto gain ON/OFF from the menu.
Autopilot
• Activate the autopilot controller from the Control bar.
• Select an autopilot mode by pressing the mode button
from the Control bar.
• Switch to standby mode from the autopilot controller or by
using the physical Standby key.
4
|
IDS Experience-Based Interface | Quick Guide - EN
Radar
• Turn the radar transmitting ON/OFF from the
menu.
• Adjust radar range by using the zoom buttons
on the radar panel.
Product manuals
For the full User manual, technical specifications and declarations, refer to the product
website on: www.simrad-yachting.com.
/