Toll-free at 1-866-619-1004
help@nathanjames.com nathanjames.com/help
TORA TV CONSOLE
NATHAN JAMES
FURNITURE
2
This should be easy, just follow our instructions
and you will be back to Netix in no time.
Standard mode
60:00
Turbo mode
50:00
Ok, let’s
get rolling.
Estimated time for assembly
What you need
Weight Limitation
- Some bubbly or your prefered relaxant
For Turbo Mode: Electric Drill
(Hex head & philips head )
- Use the packaging carton as a
working surface to prevent product
damage during assembly
Have any questions?
Toll-free at 1-866-619-1004
help@nathanjames.com nathanjames.com/help
100 lbs
3
The goods
Bottom Frame *2PCS
Middle Vertical Panel
Bottom Panel
Back Panel
Drawer Right Side Panel
*2PCS
Transverse Tube *2PCS
Apron
Left Side Panel
Drawer Front Panel *2PCS
Drawer Back Panel
*2PCS
Top Panel
Adjustable Shelf
Right Side Panel
Drawer Left Side Panel *2PCS
Drawer Bottom Panel
*2PCS
A
G
D
J
M
B
H
E
K
N
C
I
F
L
O
4
The goods
Handle
*2PCS
Cam Bolt
M6*24MM
*16PCS
Shelf Supports
M5*14MM
*4PCS
Screw
M4.2*15MM
*2PCS
Screw M4X20MM
*2PCS
Wooden Dowel 8*30MM
*14PCS
Screw M3.5*12MM
*24PCS
Screw M4.2*32MM
*8PCS
Screw M4.2*40MM
*6PCS
Hex Key
*1PCS
Drawer Slides 300*27MM
*2 SETS
Cam Lock 15*9.5MM
*16PCS
Screw
1
/
4
*30mm
*10PCS
1
4
7
10
13
2
5
8
11
3
6
9
12
5
Step 1
Step 2
Cabinet Member
Drawer Member
Pull toward arrow to open the slide until it stops and then ip it over.
Push plastic lever down and pull apart.
6
Screw M3.5*12MM
*12PCS
Screw M3.5*12MM
*12PCS
8
8
Cam Bolt M6*24MM
*2PCS
Cabinet Member
Drawer Member
4
E
G
8
8
8
8
8
8 8
8
8
4
4
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
L
M M
L
8 8
8
Step 3
Step 4
Please use the following tools
Please use the following tools
Place cam bolt in
right hole for panel E.
Place cam bolt in
left hole for panel G.
7
Cam Bolt M6*24MM
*6PCS
4
Step 5
Step 6
Please use the following tools
4
4
4
4
4
4
C
G
E
5
3
H
3
5
Wooden Dowel
8*30MM *2PCS
Cam Lock 15*9.5MM
*2PCS
5
3
Take a second to make sure you have
the correct positioning for E & G panels
because the cam locks are a real pain
in the butt to remove.
Place wooden dowels rst, then
secure cam bolt with cam lock.
8
5
5
5
5
H
3
3
3
3
3
3
G
C
E
F
Wooden Dowel
8*30MM *6PCS
Cam Lock 15*9.5MM
*6PCS
5
3
Step 7
Take a second to make sure you have
the correct E , F & G panels because
the cam locks are a real pain in
the butt to remove.
Step 8
I gured we’d give you a break and do an easy
step. Take a minute for yourself, have a sip of
wine / deep breath. Just remember this piece of
furniture will hold the screen that plays Netix.
G
C
E
F
J
Place wooden dowels rst, then
secure cam bolt with cam lock.
Ensure that the back panel hole is on the correct side
(hint - there should be no drawer sliders on the correct side)
otherwise the drawers will hide the hole.
5
3
3
3
3
3
5
5
5
3
H
9
Wooden Dowel 8*30MM
*6PCS
Screw M4.2*40MM
*6PCS
5
9
Step 9
Step 10
There’s no shame in
one more sip of vino.
Screw
1
/
4
*30mm
*4PCS
6
6
6
6
6
B
B
A
A
9
5
5
5
5
5
5
D
9
9
9
9
9
Place wooden dowels rst, then
secure cam bolt with cam lock.
10
Step 11
So close to being done!
Screw M4.2*15MM
*2PCS
Screw
1
/
4
*30mm
*6PCS
10
6
10
10
6
6
6
6
6
6
Screw M4.2*32MM
*8PCS
11
N
N
M
11
11
11
11
11
11
11
11
M
L
L
Step 12
11
Step 14
Step 15
You’re almost done! Repeat this
step for both drawers
Step 13
Slide in bottom drawer panels.
Cam Bolt
M6*24MM
*8PCS
4
4 4
4 4
4
4
4 4
K K
Handle Hardware
*2PCS
Screw M4X20MM
*2PCS
Cam Lock 15*9.6MM
*8PCS
1
2
3
3
3
3
3
2
1
O
O
K
K
Attach Front Panel rst, then
secure with cam lock.
12
Step 16
Step 17
WOOT WOOT! You’re that much
closer to binge watching G.O.T!
You’re a champ! Well done.
Shelf Supports
M5*14MM
*4PCS
7
7
7
Shelf supports
are adjustable!
I
13
No heartburn,
when we handle
the return
We really don’t want you to go through the hassle of re-packaging your item
and sending it back, because let’s be honest...nobody has time for that.
You
Give us a call
Replacement
Replacement
You
Schedule pick up
Track package
Re-package item
OUR WAY THEIR WAY
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com
we will issue you a free replacement with zero hassle.
zero hassle
14
DO NOT - use for commercial purposes
DO NOT - place on uneven oor or surface
DO NOT - use as a step-stool or stand on tv stand
DO NOT - put hot serving liquid directly on the table top
DO NOT - leave spilled liquid on the table top
DO NOT - use table if damaged or broken
DO NOT - make temporary repairs
DO NOT - use outdoor
We want your TV Stand to last as long as possible, so we recommend that
you tighten the screws 2 weeks after assembly and for added safety check
the tightness of all screw every 2 months.
For proper care and treatment of wood & metal
please check our website at nathanjames.com/products
Safety use of this product starts with you.
Use this TV stand responsibly and with the primary concern for your safety.
Follow assembly instructions carefully and inspect product upon receipt and
each use. Nathan James and its parent companies cannot be held legally
responsible for any injuries or death resulted from failure to follow instructions or
improper use of this product.
Proper Use
Safety rst,
fun later.
15
Please let us know if you are not satised.
We do our best to ensure your furniture arrives without any problems, but
occasionally mistakes happen - as humans we are imperfect beings.
In the event that a part is damaged or missing, we will be more than
happy to provide you with replacement part(s) for free.
Warranty
Manufacturer-guaranteed lifetime warranty.
Please use your phone to scan the QR code to
register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family
about us or even better leave us a review online. Spreading the
word gives us the opportunity to make more people happy
and keep our prices low for your next purchase.
Brooklyn Burdon
- Founder, Nathan James
We are only in business
if you’re happy.
For starters,
thanks for being you.
Toll-free at
1-866-619-1004
help@nathanjames.com
nathanjames.com/help
/
