Original User Manual
ReliaGATE 10-05-x4
Multi-Service Gateway & Edge Controller
Rev. 1-6 — 16 October 2018 — REGATE-10-05-x4_UserMan_ENG_1-6 — ENGLISH
Trademarks
All trademarks, registered trademarks, logos, trade names and products names contained in this
document are the property of their respective owners.
Intended audience
This document is intended for system developers, who are skilled persons with a thorough knowledge in
installing and implementing computer systems, networks, and related operating software.
Disclaimer of liability
Eurotech has reviewed the contents of this document to ensure accuracy and consistency with the
hardware and software described.
Always refer to the latest available manual revision available at: www.eurotech.com.
Revision history
Revision Description Date
1-0
First release 1 July 2016
1-1
Updated:
• Product labels
• Electromagnetic Compatibility
• Mechanical Dimensions
• Minor changes
11 October 2016
1-2
Updated:
• Operating temperature
4 November 2016
1-3
Updated:
• Operating temperature
14 December 2016
1-4
Updated section:
• How to access the interfaces under Linux
10 October 2017
1-5
Updated information about:
• The backup battery
• The serial ports
• How to access the interfaces under Linux
4 April 2018
1-6
Updated paragraph 11.3 "Internal backup battery" 16 October 2018
© 2018 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
ReliaGATE 10-05-x4 User Manual Rev 1-6
Contents
CONTENTS
Trademarks 2
Intended audience 2
Disclaimer of liability 2
Revision history 2
Contents 3
1 Safety instructions 7
1.1 Safety messages used in this document 7
1.1.1 Safety messages for hazards with a high level of risk 7
1.1.2 Safety messages for hazards with a medium level of risk 8
1.1.3 Safety messages for hazards with a low level of risk 8
1.2 Other messages used in this document 8
1.2.1 Instructions on how to use the product effectively and avoid any damage 8
1.3 How to prevent electrostatic discharge 9
1.4 How to safely connect power to the product 9
2 How to receive technical assistance 11
2.1 How to ask for technical support 11
2.2 How to send a product for repair 11
3 Conventions used in this document 13
3.1 Conventions for signal names 13
3.2 Conventions for signal types 13
4 Getting started 15
5 Product overview 17
5.1 Product labels 18
6 Declaration of Conformity 19
6.1 CE Marking 19
6.2 WEEE compliance 19
6.3 RoHS compliance 19
6.4 Electromagnetic Compatibility 20
6.4.1 Electromagnetic Compatibility (EU) 20
6.4.2 FCC Class A statement (USA) 20
7 Technical Specifications 21
8 Interfaces overview 23
8.1 Front panel interfaces 23
8.1.1 DIP switch selector functions 23
8.1.2 8-position connector functions 23
8.2 Rear panel interfaces 24
8.3 LED indicators 25
8.4 Service panel interfaces 26
9 Interfaces in detail 27
9.1 Wi-Fi and Bluetooth 27
9.1.1 Wi-Fi specifications 27
9.1.2 Bluetooth specifications 27
9.2 Cellular 28
3 / 70
Contents
ReliaGATE 10-05-x4 User Manual Rev 1-6
9.2.1 The MicroSIM card receptacle 28
9.3 Host USB port 29
9.3.1 Connector pinout 29
9.4 Ethernet port 30
9.4.1 Connector pinout 30
9.4.2 Port specifications 30
9.5 Serial ports 31
9.5.1 Serial ports pinout 31
9.5.2 How to insert RS-485 fail-safe and termination resistors 32
9.6 Console port 33
9.6.1 Connector and mating connector specifications 33
9.6.2 Connector pinout 33
9.7 RTC (Real Time Clock) 34
9.8 The MicroSD card receptacle 35
9.9 The Programmable pushbutton 35
10 The Software 37
10.1 The Linux OS distribution 37
10.2 The bootloader procedure 37
10.2.1 How to select the Linux kernel sources 37
11 The power supply 39
11.1 Power supply sources 39
11.2 External DC power supply 39
11.2.1 Power IN pinout 39
11.3 Internal backup battery 40
11.3.1 How to connect / disconnect the backup battery 40
11.4 Functions enabled by the backup battery 41
11.4.1 How to enable the RTC backup function 41
11.4.2 How to enable the Safe shutdown function 41
11.5 How to check the current power supply source 41
11.6 The Watchdog 42
11.6.1 How to enable/disable the watchdog 42
11.7 How to turn ON the product 43
11.8 How to hardware reset the product 44
11.9 How to shutdown the OS 44
11.10 How to turn OFF the product 45
12 How to access the interfaces under Linux 47
12.1 Ethernet port 47
12.2 Wi-Fi and Bluetooth 48
12.2.1 Wi-Fi 48
12.2.2 Bluetooth 48
12.3 Modem 49
12.4 Serial ports, Console port 50
12.4.1 How to test a serial port 50
12.5 LED indicators 51
12.5.1 How to manage a LED 51
12.6 The Programmable pushbutton 52
12.7 Flash Memory 53
12.8 RTC 53
13 How to log in the Administration console 55
13.1 The default credentials 55
13.2 How to login using the console port 55
13.3 How to change the Linux password 55
4 / 70
ReliaGATE 10-05-x4 User Manual Rev 1-6
Contents
14 How to install the product 57
14.1 How to install the ReliaGATE 10-05-x4 using the Mounting Bracket 57
14.2 Optional: How to install the ReliaGATE 10-05-x4 using the DIN Rail Mounting Kit 58
14.2.1 How to replace the Mounting Bracket with the DIN Rail Mounting Kit 58
14.2.2 How to install the ReliaGATE 10-05-x4 on a DIN rail 60
14.2.3 How to remove the ReliaGATE 10-05-x4 from a DIN rail 60
15 How to maintain the product 61
15.1 Use antistatic precautions 61
15.2 Remove the power supply 61
15.3 Inspect the installation of the product 61
15.4 Clean the product 61
16 Mechanical specifications 63
16.1 ReliaGATE 10-05-x4 mechanical dimensions 63
16.2 Mounting Bracket mechanical dimensions 64
17 Eurotech Everyware IoT 65
17.1 Everyware Software Framework (ESF) 65
17.2 The ESF Web UI 66
17.3 The ESF Wires Application 67
17.4 Everyware Cloud (EC) 68
17.5 For further information 68
Notes 69
5 / 70
(This page has been intentionally left blank)
ReliaGATE 10-05-x4 User Manual Rev 1-6
1 Safety instructions
1 SAFETY INSTRUCTIONS
READ CAREFULLY AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS CONTAINED
IN THIS DOCUMENT BEFORE INSTALLING / USING THE PRODUCT.
KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions
and warnings contained in this document.
Failure to comply with the instructions and warnings contained this document, violates the standards of
safety, design, manufacture, and intended use of the product.
Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings
contained this document.
Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see "How to receive technical assistance" on page 11).
1.1 Safety messages used in this document
1.1.1 Safety messages for hazards with a high level of risk
To indicate a hazard with a high level of risk which, if not avoided, will result in death or serious injury,
the following safety message is used; the message also contains the safety instructions to follow to avoid
any hazard:
DANGER
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
Example:
DANGER
HIGH VOLTAGE INSIDE.
CONTACT WILL CAUSE ELECTRIC SHOCK OR BURN.
Turn OFF and disconnect power before opening the rack.
7 / 70
1 Safety instructions
ReliaGATE 10-05-x4 User Manual Rev 1-6
1.1.2 Safety messages for hazards with a medium level of risk
To indicate a hazard with a medium level of risk which, if not avoided, could result in death or serious
injury, the following safety message is used; the message also contains the safety instructions to follow
to avoid any hazard:
WARNING
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
1.1.3 Safety messages for hazards with a low level of risk
To indicate a hazard with a low level of risk which, if not avoided, could result in minor or moderate
injury, the following safety message is used; the message also contains the safety instructions to follow
to avoid any hazard:
CAUTION
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
1.2 Other messages used in this document
1.2.1 Instructions on how to use the product effectively and avoid any damage
To indicate:
l Instructions on how to use the product effectively
l Instructions on how to avoid damaging the product or third-party property (not related to personal
injury),
the following message is used:
NOTICE
SIGN
(if necessary)
Text with the instructions to follow to complete the specific task
(written with bold characters).
8 / 70
ReliaGATE 10-05-x4 User Manual Rev 1-6
1 Safety instructions
1.3 How to prevent electrostatic discharge
NOTICE
HOW TO PREVENT DAMAGING ELECTROSTATIC-SENSITIVE DEVICES
The symbol on the left is applied on electrostatic-sensitive devices.
To prevent damaging electrostatic-sensitive devices:
l Handle the electrostatic-sensitive devices in an ESD Protected Area (EPA)
l Observe the appropriate antistatic precautions. For example: use a wrist
strap kept in constant contact with bare skin and attached to ground.
1.4 How to safely connect power to the product
To safely connect power to the product:
l Observe all the instructions for safety, installation, and operation
l Never operate with wet hands
l Use certified power cables
l Make sure the power cables are not damaged before using them
l Make sure that the power cables meet the power requirements of the device
l Position cables with care. Do not position cables in places where they may be trampled or
compressed by objects placed on them
l Make sure that the power-points and plugs are not damaged before using them
l Do not overload the power-points and plugs
l Use a power supply that meets the requirements stated on the identification label of the
product. In case of uncertainties about the required power supply, contact the Eurotech
Technical Support Team (for more information see "How to receive technical assistance"
on page 11).
9 / 70
(This page has been intentionally left blank)
ReliaGATE 10-05-x4 User Manual Rev 1-6
2 How to receive technical assistance
2 HOW TO RECEIVE TECHNICAL ASSISTANCE
2.1 How to ask for technical support
To ask for technical support, complete the following steps
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit a support request
3. Wait for the reply from the Support Team with the information you required
2.2 How to send a product for repair
To send a product for repair, complete the following steps:
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit an RMA request
3. Wait for the reply from the RMA Department. It will contain:
l The RMA number
l The shipping information
4. Pack the product adequately using anti-static material and place it in a sturdy box with enough
packing material to protect it from shocks and vibrations
5. Ship the product to Eurotech following the information received from the RMA Department.
NOTICE
Any product returned to Eurotech, that is found to be damaged due to inadequate packaging,
will not be covered by the warranty.
11 / 70
(This page has been intentionally left blank)
ReliaGATE 10-05-x4 User Manual Rev 1-6
3 Conventions used in this document
3 CONVENTIONS USED IN THIS DOCUMENT
3.1 Conventions for signal names
Convention Description
GND Ground
# Active low signal
+ Positive signal; Positive signal in differential pair
- Negative signal; Negative signal in differential pair
3.3 3.3 V signal level
5 5 V signal level
NC No Connection
Reserved Use is reserved to Eurotech
3.2 Conventions for signal types
Convention Description
I Signal is an input to the system
O Signal is an output from the system
IO Signal may be input or output
P Power and Ground
A Analog signal
NC No Connection
Reserved Use is reserved to Eurotech
13 / 70
(This page has been intentionally left blank)
ReliaGATE 10-05-x4 User Manual Rev 1-6
4 Getting started
4 GETTING STARTED
To get started with the ReliaGATE 10-05-x4, follow these steps :
1. Know the ReliaGATE 10-05-x4 interfaces.
The ReliaGATE 10-05-x4 provides connectivity to several wired and wireless interfaces.
For further information, see:
l "Product overview" on page 17
l "Declaration of Conformity" on page 19
l "Technical Specifications" on page 21
l "Interfaces overview" on page 23
l "Interfaces in detail" on page 27
2. Supply power to the ReliaGATE 10-05-x4.
Supply power to the ReliaGATE 10-05-x4 correctly, respecting all the safety instructions.
For further information, see "The power supply" on page 39
3. Log into the Administration console.
The ReliaGATE 10-05-x4 runs a Linux distribution based on a Yocto framework.
For further information, see:
l "The Software" on page 37
l "How to access the interfaces under Linux" on page 47
l "How to log in the Administration console" on page 55
4. Install the ReliaGATE 10-05-x4.
The ReliaGATE 10-05-x4 is lightweight and compact. You can easily install it in place.
For further information, see:
l "How to install the product" on page 57
l "Mechanical specifications" on page 63
5. Maintain the ReliaGATE 10-05-x4.
Periodic maintenance of the ReliaGATE 10-05-x4 ensures greater integrity and reliable operation.
For further information, see:
l "How to maintain the product" on page 61
6. Start developing your applications.
Depending on the product version you purchased, the ReliaGATE 10-05-x4 can come pre-
configured with Eurotech’s Everyware Software Framework (ESF).
ESF is a smart application container that enables remote management of IoT gateways and
provides a wide range of APIs allowing you to write and deploy your own IoT application.
For detailed instructions, and sample applications for developing device applications using ESF on
Eurotech platforms, see: http://esf.eurotech.com/docs.
15 / 70
(This page has been intentionally left blank)
ReliaGATE 10-05-x4 User Manual Rev 1-6
5 Product overview
5 PRODUCT OVERVIEW
The ReliaGATE 10-05 is a compact and lightweight device intended to be used as Multi-Service IoT
Gateway. It is based on the NXP i.MX285 CPU, with 512MB of RAM, 4GB of eMMC, and a user-
accessible microSD slot.
It is suitable for intensive workload in industrial applications. It supports a 9 to 36 V power supply with
transient, surge, noise, and reverse polarity protection with a power consumption of 1.5 W idle. An internal
backup battery can enable a customer safe shutdown application in case of a blackout.
The ReliaGATE 10-05 includes two protected serial ports (RS-232 and RS-485), and one noise and surge
protected USB 2.0 port, and one Fast Ethernet port. According to the version, the ReliaGATE 10-05 can
feature wireless connectivity capabilities: it can integrate a cellular modem (2G or global 3G), Wi-Fi
802.11b,g,n, and Bluetooth 4.0 BLE (Bluetooth Low Energy).
The ReliaGATE 10-05 can be equipped with Everyware™ Software Framework (ESF), a commercial,
enterprise-ready edition of Eclipse Kura, the open source Java/OSGi middleware for IoT gateways.
The ReliaGATE 10-05 can also take advance of Everyware Cloud (separately available). Everyware Cloud
(EC) is a specialized cloud solution that allows you to easily connect, configure and manage your device
through all its life-cycle.
A Development Kit is available upon request. It allows you to quickly and easily start the development of
your applications.
Figure 5.1 - The ReliaGATE 10-05-x4
17 / 70
5 Product overview
ReliaGATE 10-05-x4 User Manual Rev 1-6
5.1 Product labels
Product labels are placed on the underside of the ReliaGATE 10-05-x4.
Ref# Label content Label example
1 • ReliaGATE model number
• ReliaGATE serial number
• WEEE symbol
• CE mark
• Ethernet MAC address
• IMEI number
• FCC information
• Power details
18 / 70
ReliaGATE 10-05-x4 User Manual Rev 1-6
6 Declaration of Conformity
6 DECLARATION OF CONFORMITY
6.1 CE Marking
This product is CE marked.
The product meets the guidelines listed in the following sections.
Eurotech is not responsible for the use of this product together with equipment (e.g. power
supplies, personal computers, etc.) that are not CE marked and compliant with the
requirements specified in this document.
This product is compliant with:
l RoHS
l IP40
l CE
This product has been certified with the following:
- Wi-Fi / BT antenna:
l Manufacturer: Linx Technologies
l Part Number: ANT-DB1-RAF-RPS
- Cellular antenna:
l Manufacturer: Taoglas
l Part Number: GSA.8821.B301111
6.2 WEEE compliance
In compliance with the Directive 2012/19/EU of the European Parliament and of the Council
of 4 July 2012 on waste electrical and electronic equipment (WEEE), the symbol on the
right, shown on the product or within its literature, indicates separate collection for this
electrical and electronic equipment (EEE) that has been placed on the market after 2005.
This product, at the end of its life cycle, must be collected separately and managed in
accordance with the provisions of the current Directive on waste electrical and electronic
equipment.
Because of the substances present in the product, improper use or disposal of the refuse
can cause damage to human health and the environment.
To avoid any possible legal implications, contact your local waste collection body for full
recycling information.
6.3 RoHS compliance
The product described in this document, including all its components and its sub-assemblies, have been
manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment.
19 / 70
6 Declaration of Conformity
ReliaGATE 10-05-x4 User Manual Rev 1-6
6.4 Electromagnetic Compatibility
6.4.1 Electromagnetic Compatibility (EU)
Conditions of operation
This product meets the requirements of the EC Directive 2004/108/EC on the electromagnetic
compatibility.
This product is designed for industrial applications.
Modifications
Any modifications made to this product that are not approved by Eurotech may void the prerequisites for
the EC conformity declaration.
6.4.2 FCC Class A statement (USA)
Conditions of operation
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This product may not cause harmful interference
2. This product must accept any interference received, including interference that may cause
undesired operation.
FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Modifications
Changes or modifications not expressly approved by Eurotech could void the authority granted to the user
by the FCC to operate this product.
Product FCC IDs
FCC ID: UKMMRG1005
Contains FCC ID: XPYLISAU201
20 / 70
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
