Way Basics WB-4MU-BK Operating instructions

Brand
Way Basics
Model
WB-4MU-BK
Type
Operating instructions

This manual is also suitable for

Watch and Assemble www.waybasics.com/help-malibu Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
3 4
Start with the bottom horizontal zBoard
(there will be holes on only one side of board).
Align vertical zBoards to holes in the horizontal zBoard.
Next, align middle horizontal zBoard (there will be holes on
both sides of board) on top of vertical zBoards.
Continue aligning horizontal and vertical zBoards until all
tiers have been stacked. Visit links below for more details.
Enjoy building possibilities!
1 2Carefully remove the 3M
protective layer from adhesive.
Place alignment pins
in vertical zBoards.
5 Horizontal zBoards
12 Vertical zBoards
adhesive strips on 2 edges
48 Pins
Included
MALIBU
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
  • Page 1 1

Way Basics WB-4MU-BK Operating instructions

Brand
Way Basics
Model
WB-4MU-BK
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents