GenTite GTI334S3SP Operating instructions

Brand
GenTite
Model
GTI334S3SP
Type
Operating instructions

GenTite GTI334S3SP is an insulation screw with plate that can be used in many GenTite Roofing systems for attachment of insulations to steel, wood, and other approved decks. It is manufactured to conform to the physical property requirements of Factory Mutual Specification #4470. The screw has a #12 modified buttress thread and a #3 Phillips head. The plate is 3" (76 mm) square and is made of Galvalume®. The screw has a patented X-Point point type that provides excellent penetration and holding power. The screw is coated with SPEX™, which provides excellent corrosion resistance.

GenTite GTI334S3SP is an insulation screw with plate that can be used in many GenTite Roofing systems for attachment of insulations to steel, wood, and other approved decks. It is manufactured to conform to the physical property requirements of Factory Mutual Specification #4470. The screw has a #12 modified buttress thread and a #3 Phillips head. The plate is 3" (76 mm) square and is made of Galvalume®. The screw has a patented X-Point point type that provides excellent penetration and holding power. The screw is coated with SPEX™, which provides excellent corrosion resistance.

Product Data Sheet
Insulation Screw with Plate
GenTite™ RRS
250 West 96
th
Street
Indianapolis, IN 46260
800-443-4272 ● www.GenTite.com
Page 1 of 33
05/2011
DESCRIPTION
GenTite Insulation Screw with Plate can be used in many GenTite Roofing systems for attachment of
insulations to steel, wood, and other approved decks. GenTite Insulation Screw with Plate is
manufactured to conform to the physical property requirements of Factory Mutual Specification #4470.
INSTALLATION
GenTite Insulation Screw with Plate should be positioned over the approved insulation and installed per
Gentite Application Instructions.
The following fastening pattern should be used to achieve the desired fastening rate.
RecommendedFastenerPenetrationintoDeck
Steel Deck – Minimum of 3/4” (19.1 mm) required penetration
Wood Deck – Minimum of 1” (25.4 mm) required penetration
Metric Conversions:
6” = 152.4 mm
12” = 304.8 mm
18” = 457.2 mm
24” = 609.6 mm
Always stagger insulation
joints, regardless of board
s
iz
e
used
.
Product Data Sheet
Insulation Screw with Plate
GenTite™ RRS
250 West 96
th
Street
Indianapolis, IN 46260
800-443-4272 ● www.GenTite.com
Page 2 of 33
05/2011
PRODUCTDATA
SIZE QUANTITY PRODUCT #
2 7/8” (73 mm) Fastener
3 3/4” (95.25 mm) Fastener
5” (127 mm) Fastener
All with : 3” (76 mm) square Plate
100 Each (Fastener and Plate)
per Carton
W59GT51238
W59GT51375
W59GT51500
STORAGE
Screws with Plates should be protected from moisture and kept dry at all times. If stored out of doors,
place on skids in a dry area and cover with a breathable tarp.
SHELFLIFE
Not applicable
PRECAUTIONARYDATA
• Refer to Material Safety Data Sheet for additional information.
• Eye protection is recommended when installing the fasteners.
PHYSICALPROPERTIES
FASTENER
PROPERTY
FASTENER MINIMUM
PERFORMANCE
Material SAE 1022 Heat Treated
Diameter #12 Modified Buttress
Thread #12 Modified Buttress
Head Style #3 Phillips
Corrosion Coating SPEX™
Fastener Point Type Patented X-Point
Color Grey
PLATE PROPERTY PLATE MINIMUM
PERFORMANCE
Material Galvalume®
Product Data Sheet
Insulation Screw with Plate
GenTite™ RRS
250 West 96
th
Street
Indianapolis, IN 46260
800-443-4272 ● www.GenTite.com
Page 3 of 33
05/2011
LEEDINFORMATION
Recycled Content
Post Consumer
Post Industrial
25%
0%
Thickness 0.018" - 0.021" (0.46 - .53 mm)
Corrosion Coating AZ – 55; Exceeds FM 4470
Criteria
Plate Shape 3” (76 mm) Square
  • Page 1 1
  • Page 2 2
  • Page 3 3

GenTite GTI334S3SP Operating instructions

Brand
GenTite
Model
GTI334S3SP
Type
Operating instructions

GenTite GTI334S3SP is an insulation screw with plate that can be used in many GenTite Roofing systems for attachment of insulations to steel, wood, and other approved decks. It is manufactured to conform to the physical property requirements of Factory Mutual Specification #4470. The screw has a #12 modified buttress thread and a #3 Phillips head. The plate is 3" (76 mm) square and is made of Galvalume®. The screw has a patented X-Point point type that provides excellent penetration and holding power. The screw is coated with SPEX™, which provides excellent corrosion resistance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents