Franklin Brass 211-5BS Installation guide

Curved Shower Rods 211 Series

INSTALLATION:

Mount wall brackets 3” inside where a straight rod would be installed using supplied fasteners. Note the

markings on brackets for stationary and adjustable attachment. Depress pins on stationary end of rod

and clip into bracket. Repeat step for adjustable rod end. Slide ﬂanges over brackets. Wood blocking is

preferable behind all wall surfaces. If wood blocking is not available, use anchors or plugs provided

with screws.

60"

1524.0 mm

152.4 m m

2- 3/ 16"

56 .0 m m

2-11/16"

68 .75 mm

“TOOL FREE ADJUSTMENT” 68.75 mm

NO CUTTING REQUIRED FOR THE

FOLLOWING FINISHED OPENINGS

5’ ROD ADJUSTMENTS = (4’11” – 5’1”)

6’ ROD ADJUSTMENTS = (5’11” – 6’1”)

This manual is also suitable for

Download PDF