Dell 2450 User manual

Dell
Brand
Dell
Model
2450
Type
User manual

This manual is also suitable for

Dell 2450, a powerful and versatile system, offers exceptional capabilities for various applications. Its robust design allows for installation in a two-post open-frame relay rack, making it suitable for telecommunications and data center environments. The system's compact 2U form factor maximizes space utilization, while its sturdy construction ensures reliable operation in demanding conditions. With its advanced features and exceptional performance, Dell 2450 is an ideal choice for businesses seeking a dependable and efficient server solution.

Dell 2450, a powerful and versatile system, offers exceptional capabilities for various applications. Its robust design allows for installation in a two-post open-frame relay rack, making it suitable for telecommunications and data center environments. The system's compact 2U form factor maximizes space utilization, while its sturdy construction ensures reliable operation in demanding conditions. With its advanced features and exceptional performance, Dell 2450 is an ideal choice for businesses seeking a dependable and efficient server solution.

(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFfc0.fm
www.dell.com
™
Dell™ PowerEdge™ 2450 Systems
TWO -POST RACK
INSTALLATION
Notes, Notices, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in
bold type or in italic type. These blocks are notes, notices, cautions, and warnings,
and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of
your computer system.
NOTICE: A NOTICE indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
WARNING: A WARNING indicates a potentially hazardous situation which,
if not avoided, could result in death or serious bodily injury.
____________________
Information in this document is subject to change without notice.
© 2000 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corpo-
ration is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Computer
Corporation. Other trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Dell Computer Corporation disclaims
any proprietary interest in trademarks and trade names other than its own.
February 2000 P/N 81HFF Rev. A00
support.dell.com Dell PowerEdge 2450 Systems - Two-Post Rack Installation 1
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
DELL CONFIDENTIAL - Preliminary 9/27/01
Dell™ PowerEdge™ 2450 Systems
Two-Post Rack Installation
This document provides instructions for installing a Dell PowerEdge 2450 system in a
two-post open-frame relay rack, such as those found in telecommunications equip-
ment facilities.
The two-post open-frame relay rack must be properly secured to the floor, to the ceil-
ing or upper wall, and where applicable, to adjacent racks, using floor and wall
fasteners and bracing specified or approved by the rack manufacturer or by industry
standards. Refer to the two-post open-frame relay rack manufacturer’s installation
documentation for precautionary warnings and information before attempting this
installation.
CAUTION: Do not attempt to install the PowerEdge system into a two-post
open-frame relay rack that has not been securely anchored in place. Dam-
age to the system and personal injury may result.
Refer to the safety instructions in your Dell system documentation for additional
safety information regarding rack installation.
Rack Kit Components
The rack kit includes the following items (see Figure 1):
• One tray assembly (PowerEdge 2450 two-post)
• Four 12-24 x 0.5-inch pan-head Phillips screws
2 Dell PowerEdge 2450 Systems - Two-Post Rack Installation
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
Figure 1. Rack Kit Contents
Recommended Tools
You need the following tools and equipment to install the system in a two-post open-
frame relay rack:
• #2 Phillips screwdriver
• Masking tape and/or felt-tip marker pen, for use in marking the mounting holes to
be used
Marking the Rack
1. Determine where you want to place the bottom of the 2-U support tray.
2. Mark the top and bottom holes on the rack.
Each 1-U (1.75-inch) vertical space has three holes, with center-to-center spacing
between holes (beginning at the top of a 1-U space) of 0.625, 0.625, and 0.5
inches (see Figure 2).
tray assembly
12-24 x 0.5 inch pan-head screw
support.dell.com Dell PowerEdge 2450 Systems - Two-Post Rack Installation 3
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
Figure 2. Two-Post Open-Frame Relay Rack 1-U Hole Spacing
Installing the Support Tray in the Rack
CAUTION: The 2-U support tray is designed to support a single
PowerEdge 2450 system. Do not attempt to install any other system in this
support tray. Damage to the system and personal injury may result.
1. Place the support tray into the rack with the bottom of the tray at the marks you
made earlier for the location of the bottom of the installed system.
2. Install four 12-24 x 0.5-inch screws provided to secure the support tray using the
top and the bottom holes on the support tray’s front-mounting flange (see
Figure 3).
An internally threaded stud projecting from the front of the tray flanges accepts
the captive fastener on the front of the PowerEdge server.
3.5 inches (2 U)
1.75 inch (1 U)
4 Dell PowerEdge 2450 Systems - Two-Post Rack Installation
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
Figure 3. Installing the Support Tray in the Rack
Installing the System in the Rack
CAUTION: Due to the size and weight of the computer system, never
attempt to install the computer system by yourself.
1. If your system has an optional plastic bezel, remove it (see the Installation and
Troubleshooting Guide for instructions).
2. Lift the system into position on the support tray.
3. Slide the system completely into position and secure it to the rack using the cap-
tive fasteners at the lower edge of the front panel (see Figure 4).
12-24 x 0.5 inch
screws (4)
support.dell.com Dell PowerEdge 2450 Systems - Two-Post Rack Installation 5
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
Figure 4. Securing the Computer System in the Rack
4. Attach the front bezel, if one is available, to the system (see the Installation and
Troubleshooting Guide for instructions).
This completes the two-post rack installation.
captive
fasteners
6 Dell PowerEdge 2450 Systems - Two-Post Rack Installation
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Dell 2450 User manual

Dell
Brand
Dell
Model
2450
Type
User manual
This manual is also suitable for

Dell 2450, a powerful and versatile system, offers exceptional capabilities for various applications. Its robust design allows for installation in a two-post open-frame relay rack, making it suitable for telecommunications and data center environments. The system's compact 2U form factor maximizes space utilization, while its sturdy construction ensures reliable operation in demanding conditions. With its advanced features and exceptional performance, Dell 2450 is an ideal choice for businesses seeking a dependable and efficient server solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents