![](//vs1.manuzoid.com/store/data-gzf/d4bb30af04ca87b327c7764107097420/2/001645707.htmlex.zip/bg1.jpg)
Danfoss Heating Solutions VIJPB102 06/2014
1
Installation Guide
Manual Hand Wheel 013G5009
1. Make sure the hand wheel is fully open. 2. Install the hand wheel on the valve along
with the guide slots.
A
3. Turn the hand wheel clockwise until the
bottom reaches the indicator line (A).
4. Visually check that the bottom is aligned
with the indicator line.
5. Place the spindle inside the handle. 6. Press on the cover cap.