Quectel Wireless Solutions EC25-V User manual

Brand
Quectel Wireless Solutions
Model
EC25-V
Type
User manual

This manual is also suitable for

EC25-V
User Manual
LTE Module Series
Rev. EC25-V_User_Manual_V1.0
Date: 2016-03-28
www.quectel.com
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 1 / 69
Our aim is to provide customers with timely and comprehensive service. For any
assistance, please contact our company headquarters:
Quectel Wireless Solutions Co., Ltd.
Office 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233
Tel: +86 21 5108 6236
Mail: info@quectel.com
Or our local office, for more information, please visit:
http://www.quectel.com/support/salesupport.aspx
For technical support, to report documentation errors, please visit:
http://www.quectel.com/support/techsupport.aspx
Or Email: Support@quectel.com
GENERAL NOTES
QUECTEL OFFERS THIS INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION
PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT
TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT
MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT
ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR
RELIANCE UPON THE INFORMATION. THE INFORMATION SUPPLIED HEREIN IS SUBJECT TO
CHANGE WITHOUT PRIOR NOTICE.
COPYRIGHT
THIS INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF
QUECTEL CO., LTD. TRANSMITTABLE, REPRODUCTION, DISSEMINATION AND EDITING OF THIS
DOCUMENT AS WELL AS UTILIZATION OF THIS CONTENTS ARE FORBIDDEN WITHOUT
PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS
ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL
OR DESIGN.
Copyright © Quectel Wireless Solutions Co., Ltd. 2016. All rights reserved.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 2 / 69
About the Document
History
Revision
Date
Author
Description
V1.0
2016-03-28
Woody WU
Initial
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 3 / 69
Contents
About the Document ................................................................................................................................... 2
Contents ....................................................................................................................................................... 3
Table Index ................................................................................................................................................... 5
Figure Index ................................................................................................................................................. 6
1 Introduction .......................................................................................................................................... 7
1.1. Safety Information...................................................................................................................... 7
2 Product Concept .................................................................................................................................. 9
2.1. General Description ................................................................................................................... 9
2.2. Directives and Standards ........................................................................................................ 10
2.2.1. FCC Statement .............................................................................................................. 10
2.3. Key Features ........................................................................................................................... 10
2.4. Functional Diagram ................................................................................................................. 12
2.5. Evaluation Board ..................................................................................................................... 13
3 Application Interface ......................................................................................................................... 14
3.1. General Description ................................................................................................................. 14
3.2. Pin Assignment ........................................................................................................................ 14
3.3. Pin Description ......................................................................................................................... 16
3.4. Operating Modes ..................................................................................................................... 21
3.5. Power Saving ........................................................................................................................... 22
3.5.1. Sleep Mode .................................................................................................................... 22
3.5.1.1. UART Application ................................................................................................. 22
3.5.1.2. USB Application with USB Remote Wakeup Function ........................................ 23
3.5.1.3. USB Application with USB Suspend/Resume and RI Function .......................... 23
3.5.1.4. USB Application without USB Suspend Function ................................................ 24
3.5.2. Airplane Mode ................................................................................................................ 25
3.6. Power Supply ........................................................................................................................... 25
3.6.1. Power Supply Pins ......................................................................................................... 25
3.6.2. Decrease Voltage Drop .................................................................................................. 26
3.6.3. Reference Design for Power Supply .............................................................................. 27
3.6.4. Monitor the Power Supply .............................................................................................. 28
3.7. Turn on and off Scenarios ....................................................................................................... 28
3.7.1. Turn on Module Using the PWRKEY ............................................................................. 28
3.7.2. Turn off Module .............................................................................................................. 30
3.7.2.1. Turn off Module Using the PWRKEY Pin ............................................................. 30
3.7.2.2. Turn off Module Using AT Command ................................................................... 30
3.8. Reset the Module..................................................................................................................... 30
3.9. USIM Card Interface ................................................................................................................ 32
3.10. USB Interface .......................................................................................................................... 34
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 4 / 69
3.11. UART Interface ........................................................................................................................ 36
3.12. PCM and I2C Interface ............................................................................................................ 38
3.13. ADC Function .......................................................................................................................... 41
3.14. Network Status Indication ........................................................................................................ 41
3.15. STATUS ................................................................................................................................... 42
3.16. Behavior of the RI .................................................................................................................... 43
4 GNSS Receiver ................................................................................................................................... 45
4.1. General Description ................................................................................................................. 45
4.2. GNSS Performance ................................................................................................................. 45
4.3. Layout Guideline ...................................................................................................................... 46
5 Antenna Interface ............................................................................................................................... 47
5.1. Main/Rx-diversity Antenna Interface ........................................................................................ 47
5.1.1. Pin Definition .................................................................................................................. 47
5.1.2. Operating Frequency ..................................................................................................... 47
5.1.3. Reference Design .......................................................................................................... 47
5.2. GNSS Antenna Interface ......................................................................................................... 48
5.3. Antenna Installation ................................................................................................................. 49
5.3.1. Antenna Requirement .................................................................................................... 49
5.3.2. Install the Antenna with RF Connector .......................................................................... 50
6 Electrical, Reliability and Radio Characteristics ............................................................................ 53
6.1. Absolute Maximum Ratings ..................................................................................................... 53
6.2. Power Supply Ratings ............................................................................................................. 53
6.3. Operating Temperature ............................................................................................................ 54
6.4. Current Consumption .............................................................................................................. 54
6.5. RF Output Power ..................................................................................................................... 54
6.6. RF Receiving Sensitivity .......................................................................................................... 55
6.7. Electrostatic Discharge ............................................................................................................ 55
7 Mechanical Dimensions .................................................................................................................... 56
7.1. Mechanical Dimensions of the Module.................................................................................... 56
7.2. Footprint of Recommendation ................................................................................................. 58
7.3. Top View of the Module ........................................................................................................... 59
7.4. Bottom View of the Module ...................................................................................................... 59
8 Storage and Manufacturing .............................................................................................................. 60
8.1. Storage .................................................................................................................................... 60
8.2. Manufacturing and Welding ..................................................................................................... 60
8.3. Packaging ................................................................................................................................ 61
9 Appendix A Reference ....................................................................................................................... 63
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 5 / 69
Table Index
TABLE 1: EC25 SERIES FREQUENCY BANDS ................................................................................................ 9
TABLE 2: EC25 KEY FEATURES ..................................................................................................................... 10
TABLE 3: IO PARAMETERS DEFINITION ........................................................................................................ 16
TABLE 4: PIN DESCRIPTION ........................................................................................................................... 16
TABLE 5: OVERVIEW OF OPERATING MODES ............................................................................................. 21
TABLE 6: VBAT AND GND PINS ....................................................................................................................... 26
TABLE 7: PWRKEY PIN DESCRIPTION .......................................................................................................... 28
TABLE 8: RESET_N PIN DESCRIPTION ......................................................................................................... 31
TABLE 9: PIN DEFINITION OF THE USIM INTERFACE ................................................................................. 32
TABLE 10: USB PIN DESCRIPTION ................................................................................................................ 34
TABLE 11: PIN DEFINITION OF THE MAIN UART INTERFACE ..................................................................... 36
TABLE 12: PIN DEFINITION OF THE DEBUG UART INTERFACE ................................................................. 36
TABLE 13: LOGIC LEVELS OF DIGITAL I/O .................................................................................................... 37
TABLE 14: PIN DEFINITION OF PCM AND I2C INTERFACE .......................................................................... 39
TABLE 15: PIN DEFINITION OF THE ADC ...................................................................................................... 41
TABLE 16: CHARACTERISTIC OF THE ADC .................................................................................................. 41
TABLE 17: PIN DEFINITION OF NETWORK INDICATOR ............................................................................... 41
TABLE 18: WORKING STATE OF THE NETWORK INDICATOR..................................................................... 42
TABLE 19: PIN DEFINITION OF STATUS ........................................................................................................ 43
TABLE 20: BEHAVIOR OF THE RI ................................................................................................................... 44
TABLE 21: GNSS PERFORMANCE ................................................................................................................. 45
TABLE 22: PIN DEFINITION OF THE RF ANTENNA ....................................................................................... 47
TABLE 23: THE MODULE OPERATING FREQUENCIES ................................................................................ 47
TABLE 24: PIN DEFINITION OF GNSS ANTENNA .......................................................................................... 48
TABLE 25: GNSS FREQUENCY ....................................................................................................................... 49
TABLE 26: ANTENNA REQUIREMENTS .......................................................................................................... 49
TABLE 27: ABSOLUTE MAXIMUM RATINGS .................................................................................................. 53
TABLE 28: THE MODULE POWER SUPPLY RATINGS .................................................................................. 53
TABLE 29: OPERATING TEMPERATURE ........................................................................................................ 54
TABLE 30: CONDUCTED RF OUTPUT POWER ............................................................................................. 55
TABLE 31: ELECTROSTATICS DISCHARGE CHARACTERISTICS ............................................................... 55
TABLE 32: RELATED DOCUMENTS ................................................................................................................ 63
TABLE 33: TERMS AND ABBREVIATIONS ...................................................................................................... 63
TABLE 34: DESCRIPTION OF DIFFERENT CODING SCHEMES .................................................................. 67
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 6 / 69
Figure Index
FIGURE 1: FUNCTIONAL DIAGRAM ........................................................................................................ 12
FIGURE 2: PIN ASSIGNMENT (TOP VIEW) ............................................................................................. 15
FIGURE 3: UART SLEEP APPLICATION .................................................................................................. 22
FIGURE 4: SLEEP APPLICATION WITH USB REMOTE WAKEUP ........................................................ 23
FIGURE 5: SLEEP APPLICATION WITH RI ............................................................................................. 24
FIGURE 6: SLEEP APPLICATION WITHOUT SUSPEND FUNCTION .................................................... 24
FIGURE 7: POWER SUPPLY LIMITS DURING TRANSMIT BURST ....................................................... 26
FIGURE 8: STAR STRUCTURE OF THE POWER SUPPLY .................................................................... 27
FIGURE 9: REFERENCE CIRCUIT OF POWER SUPPLY ....................................................................... 27
FIGURE 10: TURN ON THE MODULE USING DRIVING CIRCUIT ......................................................... 28
FIGURE 11: TURN ON THE MODULE USING KEYSTROKE .................................................................. 29
FIGURE 12: TIMING OF TURNING ON MODULE ................................................................................... 29
FIGURE 13: TIMING OF TURNING OFF MODULE .................................................................................. 30
FIGURE 14: REFERENCE CIRCUIT OF RESET_N BY USING DRIVING CIRCUIT .............................. 31
FIGURE 15: REFERENCE CIRCUIT OF RESET_N BY USING BUTTON .............................................. 31
FIGURE 16: TIMING OF RESETTING MODULE ...................................................................................... 32
FIGURE 17: REFERENCE CIRCUIT OF 8-PIN USIM CONNECTOR ...................................................... 33
FIGURE 18: REFERENCE CIRCUIT OF 6-PIN USIM CONNECTOR ...................................................... 33
FIGURE 19: REFERENCE CIRCUIT OF USB APPLICATION ................................................................. 35
FIGURE 20: REFERENCE CIRCUIT WITH TRANSLATOR CHIP............................................................ 37
FIGURE 21: REFERENCE CIRCUIT WITH TRANSISTOR CIRCUIT ...................................................... 38
FIGURE 22: PRIMARY MODE TIMING ..................................................................................................... 39
FIGURE 23: AUXILIARY MODE TIMING ................................................................................................... 39
FIGURE 24: REFERENCE CIRCUIT OF PCM APPLICATION WITH AUDIO CODEC ............................ 40
FIGURE 25: REFERENCE CIRCUIT OF THE NETWORK INDICATOR .................................................. 42
FIGURE 26: REFERENCE CIRCUIT OF THE STATUS............................................................................ 43
FIGURE 27: REFERENCE CIRCUIT OF ANTENNA INTERFACE ........................................................... 48
FIGURE 28: REFERENCE CIRCUIT OF GNSS ANTENNA ..................................................................... 49
FIGURE 29: DIMENSIONS OF THE UF.L-R-SMT CONNECTOR (UNIT: MM) ........................................ 50
FIGURE 30: MECHANICALS OF UF.L-LP CONNECTORS ..................................................................... 51
FIGURE 31: SPACE FACTOR OF MATED CONNECTOR (UNIT: MM) ................................................... 52
FIGURE 32: MODULE TOP AND SIDE DIMENSIONS ............................................................................. 56
FIGURE 33: MODULE BOTTOM DIMENSIONS (BOTTOM VIEW) ......................................................... 57
FIGURE 34: RECOMMENDED FOOTPRINT (TOP VIEW) ...................................................................... 58
FIGURE 35: TOP VIEW OF THE MODULE .............................................................................................. 59
FIGURE 36: BOTTOM VIEW OF THE MODULE ...................................................................................... 59
FIGURE 37: LIQUIDS TEMPERATURE .................................................................................................... 61
FIGURE 38: CARRIER TAPE .................................................................................................................... 62
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 7 / 69
1 Introduction
This document defines the EC25 module and describes its air interface and hardware interface which are
connected with your application.
This document can help you quickly understand module interface specifications, electrical and
mechanical details, as well as other related information of EC25 module. Associated with application
notes and user guide, you can use EC25 module to design and set up mobile applications easily.
1.1. Safety Information
The following safety precautions must be observed during all phases of the operation, such as usage,
service or repair of any cellular terminal or mobile incorporating EC25 module. Manufacturers of the cellular
terminal should send the following safety information to users and operating personnel and to incorporate
these guidelines into all manuals supplied with the product. If not so, Quectel assumes no liability for the
customer’s failure to comply with these precautions.
Full attention must be given to driving at all times in order to reduce the risk of an
accident. Using a mobile while driving (even with a handsfree kit) causes
distraction and can lead to an accident. You must comply with laws and regulations
restricting the use of wireless devices while driving.
Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is
switched off. The operation of wireless appliances in an aircraft is forbidden, so as
to prevent interference with communication systems. Consult the airline staff about
the use of wireless devices on boarding the aircraft, if your device offers a Airplane
Mode which must be enabled prior to boarding an aircraft.
Switch off your wireless device when in hospitals, clinics or other health care
facilities. These requests are desinged to prevent possible interference with
sentitive medical equipment.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 8 / 69
Cellular terminals or mobiles operating over radio frequency signal and cellular
network cannot be guaranteed to connect in all conditions, for example no mobile
fee or with an invalid SIM card. While you are in this condition and need emergent
help, please remember using emergency call. In order to make or receive a call,
the cellular terminal or mobile must be switched on and in a service area with
adequate cellular signal strength.
Your cellular terminal or mobile contains a transmitter and receiver. When it is ON ,
it receives and transmits radio frequency energy. RF interference can occur if it is
used close to TV set, radio, computer or other electric equipment.
In locations with potencially explosive atmospheres, obey all posted signs to turn
off wireless devices such as your phone or other cellular terminals. Areas with
potencially explosive atmospheres include fuelling areas, below decks on boats,
fuel or chemical transfer or storage facilities, areas where the air contains
chemicals or particles such as grain, dust or metal powders, etc.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 9 / 69
2 Product Concept
2.1. General Description
EC25 contains four variants: EC25-E, EC25-A, EC25-V and EC25-AUT. You can choose the dedicated
type based on the region or operator. The following table shows the frequency bands of EC25 series
modules.
Table 1: EC25 Series Frequency Bands
1.
1)
GNSS function is optional.
2.
2)
EC25-V includes Data-only and Telematics versions. Data-only version does not support voice
function, while Telematics version supports it.
With a tiny profile of 32.0mm × 29.0mm × 2.4mm, EC25 can meet almost all requirements for M2M
applications such as automotive, metering, tracking system, security, router, wireless POS, mobile
computing device, PDA phone and tablet PC, etc.
EC25 is an SMD type module which can be embedded in applications through its 144-pin pads, including
EC25-V
FDD-LTE
(with Rx-diversity)
B4/B13
TDD-LTE
(with Rx-diversity)
Not supported
WCDMA
(with Rx-diversity)
Not supported
GSM Not supported
GNSS
GPS,GLONASS,
BeiDou/Compass,Galileo,QZSS
NOTES
80 LCC signal pads and 64 other pads.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 10 /
69
2.2. Directives and Standards
2.2.1. FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
2.3. Key Features
The following table describes the detailed features of EC25 module.
Table 2: EC25 Key Features
Feature
Power Supply
Transmitting Power
Support up to non-CA CAT4
Support 1.4 to 20MHz RF bandwidth
FDD: Max 50Mbps (UL), 150Mbps (DL)
TDD: Max 35Mbps (UL), 130Mbps (DL)
LTE Features
Support 16-QAM, 64-QAM and QPSK modulation
Internet Protocol Features
SMS
USIM Interface
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 11 /
69
Audio Features
PCM Interface
USB Interface
Support LTE Rx-diversity
UART Interface
GNSS Features
Two pins including NET_MODE and NET_STATUS to indicate network
connectivity status
AT Commands
Including main antenna (ANT_MAIN), Rx-diversity antenna (ANT_DIV) and
GNSS antenna (ANT_GNSS)
Network Indication
Size: 32.0±0.15 × 29.0±0.15 × 2.4±0.2mm
Weight: approx. 4.9g
Antenna Interface
Normal operation: -35°C ~ +75°C
Restricted operation: -40°C ~ -35°C and +75°C ~ +85°C
Storage temperature: -45°C ~ +90°C
Physical Characteristics USB interface
Temperature Range All hardware components are fully compliant with EU RoHS directive
Firmware Upgrade
RoHS
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 12 /
69
2.4. Functional Diagram
The following figure shows a block diagram of EC25 and illustrates the major functional parts.
Power management
Baseband
DDR+NAND flash
Radio frequency
Peripheral interface
Baseband
PMIC
Transceiver
NAND
DDR2
SDRAM
PA
Switch
LNA
Switch
ANT_MAIN ANT_DIVANT_GNSS
VBAT_BB
VBAT_RF
APT
PWRKEY
ADCs
VDD_EXT USB USIM PCM
UARTI2C
RESET_N
19.2M
XO
STATUS
GPIOs
SAW
Control
IQ Control
Duplex
SAW
Tx
PRx DRx
Figure 1: Functional Diagram
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 13 /
69
2.5. Evaluation Board
In order to help you to develop applications with EC25, Quectel supplies an evaluation board (EVB), USB
data cable, earphone, antenna and other peripherals to control or test the module.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 14 /
69
3 Application Interface
3.1. General Description
EC25 is equipped with an 80-pin SMT pad plus 64-pin ground pads and reserved pads that can be
connected to cellular application platform. Sub-interfaces included in these pads are described in detail in
the following chapters:
Power supply
USIM interface
USB interface
UART interface
PCM interface
ADC interface
Status indication
3.2. Pin Assignment
The following figure shows the pin assignment of the EC25 module.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 15 /
69
34
3
35
36
20
21
22
23
24
25
26
27
28
29
30
31
32
33
1
4
5
6
7
2
WAKEUP_IN
AP_READY
RESERVED
W_DISABLE#
NET_MODE
NET_STATUS
VDD_EXT
GND
GND
DBG_RXD
DBG_TXD
USIM_PRESENCE
USIM_VDD
USIM_DATA
USIM_CLK
USIM_RST
RESERVED
8
9
10
11
12
13
14
15
16
17
18
19
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
USIM_GND
GND
RESET_N
PWRKEY
GND
RESERVED
PCM_IN
※
PCM_OUT
※
PCM_SYNC
※
PCM_CLK
※
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
ANT_DIV
GND
GND
USB_VBUS
USB_DM
USB_DP
RXD
TXD
DTR
RTS
CTS
DCD
RI
STATUS
VBAT_BB
VBAT_BB
VBAT_RF
VBAT_RF
GND
RESERVED
GND
GND
ANT_MAIN
GND
ANT_GNSS
GND
ADC1
RESERVED
I2C_SDA
I2C_SCL
RESERVED
ADC0
GND
GND
GND
73
74
75
76
77
78
79
80
81
82
83
84
100
101
102
106
107
111
112
103
104
109
105
110
89
94
98
88
93
97
86
91
96
85
90
95
99
87
92
108
113
RESERVED
RESERVED
117
126
125
124
123
122
121
120
119
118
127
128
115
RESERVED
RESERVED
116
139
140
138
137
136
135
134
133
132
131
130
129
114
RESERVED
Power Pins
RESERVED
RESERVED
RESERVED
Signal Pins RESERVED Pins
GND Pins
RESERVED
RESERVED
141
142
RESERVED
RESERVED
143
144
Figure 2: Pin Assignment (Top View)
1. Keep all RESERVED pins and unused pins unconnected.
2. GND pads 85~112 should be connected to ground in the design, and RESERVED pads 73~84
should not be designed in schematic and PCB decal.
3. “
※
” means these interface functions are only supported on Telematics version.
NOTES
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 16 /
69
3.3. Pin Description
The following tables show the EC25’s pin definition.
Table 3: IO Parameters Definition
Type
Description
IO
Bidirectional input/output
DI
Digital input
DO
Digital output
PI
Power input
PO
Power output
AI
Analog input
AO
Analog output
OD
Open drain
Table 4: Pin Description
Power Supply
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
VBAT_BB
59, 60
PI
Power supply for
module baseband
part.
Vmax=4.3V
Vmin=3.3V
Vnorm=3.8V
It must be able to
provide sufficient
current up to 0.8A.
VBAT_RF
57, 58
PI
Power supply for
module RF part.
Vmax=4.3V
Vmin=3.3V
Vnorm=3.8V
It must be able to
provide sufficient
current up to 1.8A in a
transmitting burst.
VDD_EXT
7
PO
Provide 1.8V for
external circuit.
Vnorm=1.8V
I
O
max=50mA
Power supply for
external GPIO’s pull up
circuits.
GND
8, 9, 19,
22, 36, 46,
48, 50~54,
56, 72,
Ground.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 17 /
69
85~112
Turn on/off
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
PWRKEY
21
DI
Turn on/off the
module.
V
IH
max=2.1V
V
IH
min=1.3V
V
IL
max=0.5V
RESET_N
20
DI
Reset the module.
V
IH
max=2.1V
V
IH
min=1.3V
V
IL
max=0.5V
Status Indication
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
STATUS
61
OD
Indicate the module
operating status.
The drive current
should be less than
0.9mA.
Require external
pull-up. If unused,
keep it open.
NET_MODE
5
DO
Indicate the module
network registration
mode.
V
OH
min=1.35V
V
OL
max=0.45V
1.8V power domain.
If unused, keep it
open.
NET_
STATUS
6
DO
Indicate the module
network activity
status.
V
OH
min=1.35V
V
OL
max=0.45V
1.8V power domain.
If unused, keep it
open.
USB Interface
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
USB_VBUS
71
PI
USB detection.
Vnorm=5.0V
USB_DP
69
IO
USB differential data
bus.
Compliant with USB
2.0 standard
specification.
Require differential
impedance of 90ohm.
USB_DM
70
IO
USB differential data
bus.
Compliant with USB
2.0 standard
specification.
Require differential
impedance of 90ohm.
USIM Interface
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
USIM_GND
10
Specified ground for
USIM card.
USIM_VDD
14
PO
Power supply for
USIM card.
For 1.8V USIM:
Vmax=1.9V
Vmin=1.7V
Either 1.8V or 3V is
supported by the
module automatically.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 18 /
69
For 3.0V USIM:
Vmax=3.05V
Vmin=2.7V
I
O
max=50mA
USIM_DATA
15
IO
Data signal of USIM
card.
For 1.8V USIM:
V
IL
max=0.6V
V
IH
min=1.2V
V
OL
max=0.45V
V
OH
min=1.35V
For 3.0V USIM:
V
IL
max=1.0V
V
IH
min=1.95V
V
OL
max=0.45V
V
OH
min=2.55V
USIM_CLK
16
DO
Clock signal of USIM
card.
For 1.8V USIM:
V
OL
max=0.45V
V
OH
min=1.35V
For 3.0V USIM:
V
OL
max=0.45V
V
OH
min=2.55V
USIM_RST
17
DO
Reset signal of
USIM card.
For 1.8V USIM:
V
OL
max=0.45V
V
OH
min=1.35V
For 3.0V USIM:
V
OL
max=0.45V
V
OH
min=2.55V
USIM_
PRESENCE
13
DI
USIM card insertion
detection.
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
1.8V power domain.
If unused, keep it
open.
UART Interface
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
RI
62
DO
Ring indicator
V
OL
max=0.45V
V
OH
min=1.35V
1.8V power domain.
If unused, keep it
open.
DCD
63
DO
Data carrier
detection.
V
OL
max=0.45V
V
OH
min=1.35V
1.8V power domain.
If unused, keep it
open.
LTE Module Series
EC25-V User Manual
EC25-V_User_Manual Confidential / Released 19 /
69
CTS
64
DO
Clear to send.
V
OL
max=0.45V
V
OH
min=1.35V
1.8V power domain.
If unused, keep it
open.
RTS
65
DI
Request to send.
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
1.8V power domain.
If unused, keep it
open.
DTR
66
DI
Data terminal ready,
sleep mode control.
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
1.8V power domain.
Pull-up by default.
Low level wakes up
the module.
If unused, keep it
open.
TXD
67
DO
Transmit data.
V
OL
max=0.45V
V
OH
min=1.35V
1.8V power domain.
If unused, keep it
open.
RXD
68
DI
Receive data.
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
1.8V power domain.
If unused, keep it
open.
Debug UART Interface
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
DBG_TXD
12
DO
Transmit data.
V
OL
max=0.45V
V
OH
min=1.35V
1.8V power domain.
If unused, keep it
open.
DBG_RXD
11
DI
Receive data.
V
IL
min=-0.3V
V
IL
max=0.6V
V
IH
min=1.2V
V
IH
max=2.0V
1.8V power domain.
If unused, keep it
open.
ADC Interface
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
ADC0
45
AI
General purpose
analog to digital
converter.
Voltage range:
0.3V to VBAT_BB
If unused, keep it
open.
ADC1
44
AI
General purpose
analog to digital
converter.
Voltage range:
0.3V to VBAT_BB
If unused, keep it
open.
PCM Interface
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67

Quectel Wireless Solutions EC25-V User manual

Brand
Quectel Wireless Solutions
Model
EC25-V
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents