Duravit CE1011001 Specification Manual

  • I have analyzed the provided datasheet for the DURAVIT S FreshStart CE1011001010 basin mixer. This document details the product's specifications, including its chrome finish, ceramic cartridge, and flow rate. It also lists recommended basin types. I am ready to answer your questions about this product.
  • What is the connection size of this mixer?
    What is the recommended operating pressure?
    What is the flow rate of this mixer?
    What type of spray does this mixer have?
    What kind of waste set included?
Single lever basin mixer S FreshStartSingle lever basin mixer S FreshStart DimensionDimension WeightWeight Order numberOrder number
connection size DN15
ColorsColors
10 Chrome
VariantVariant
chrome, ceramic cartridge, projection 100 mm, flexible
connection hoses 3/8", aerator with Easy-clean sprayplate, flow
rate 5,0 l/min (3 bar), normal spray, recommended operating
pressure 1 - 5 bar, with pop-up waste set
CE1011001010
Recommended basinsRecommended basins
Handrinse basin, furniture handrinse basin without overflow,
with tap platform, underneath glazed, 500 x 250 mm 500 x 250 mm 072450
Handrinse basin, furniture handrinse basin without overflow,
with tap platform, tap hole on right side, fixings included,
underneath glazed, 380 x 250 mm
380 x 250 mm 072438
Handrinse basin, furniture handrinse basin with overflow, with
tap platform, Ceramic covered push-open waste included,
underneath glazed, 530 x 430 mm
530 x 430 mm 234453
Handrinse basin, furniture handrinse basin without overflow,
with tap platform, ceramic covered slotted waste included,
underneath glazed, 450 x 320 mm
450 x 320 mm 073345
Handrinse basin without overflow, with tap platform,
underneath glazed, 450 x 335 mm 450 x 335 mm 073845
Handrinse basin without overflow, with tap platform, tap hole
on right side, fixings included, underneath glazed, 400 x 220
mm
400 x 220 mm 073940
Circle Single lever basin mixer S FreshStart # CE1011001010
All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in mm and are non-binding.
Exact measurements, in particular for customised installation scenarios, can only be taken from the finished piece.
Circle Single lever basin mixer S FreshStart # CE1011001010
/