Version:A1
LED Wall Pack Light Use Manual
1. Technical Parameters
2. Dimension Diagram (mm)
3. Application
LED Wall Pack Light series can be widely used as Exterior or interior LED lighting for Hotels,
Garages, Commercial Buildings, Public areas, Schools and Hospitals,etc.
4. Installation instructions
Model name Input Voltage Power Ingress Protection
BR-WP20W-01-G1 AC100-277V 50/60Hz 20W IP65
BR-WP30W-01-G1 AC100-277V 50/60Hz 30W IP65
20W / 30W
75.7mm(2.98”)
149.8mm(5.9”)
241.7mm(9.52”)
P1-Mounting with J-boxCaulk to mounting surface at all sides
keep the gradienter level
Brown --- L
Blue ----- N
G/Y -- GND
Notes before installation:
Please read LED Wall Pack light use manual carefully before installation and follow the instructions.
To avoid accidents like damage, dropping, electric shock, fire, please don't arbitrarily retrofit or change any lamp fittings.
Clean lamps with a soft wrung-out soapy cloth, and then wipe it with a dry cloth. Please don't wipe the lamps with gasoline
or other volatiles. Please don't spray insecticides on the lamps. Otherwise, it may cause discoloration or damage.
Please do not open the lamp without permission.
Please turn off the power when in installation or maintenance.
Outdoor LED Wall Pack Lighting
with Light Sensor
Start within 50 LUX
Close above 150LUX