I. Technical Specifications:
• Connectivity: Lightning
• Frequency Response: 50-8KHz
• Impedance: 32Ω ± 15%
• Sensitivity: 92dB ± 3dB at 1khz
• Microphone: Yes
• Volume control: Yes
• Cord Length: 1.2m
• Color: black
II. Features
1 Metal earlap, small size, stylish appearance, easy
and comfortable to carry;
2 Fit for: Apple iPhone series and iPad series, any
Lightning devices that runs iOS 10.0.2 or later, with
earphone audio function;
III. Instruction
1 Apple Lightning connector;
2 Function board: Volume+/- button is for
increasing/decreasing the volume on the Apple device;
Middle button is for songs play/pause, calls
answer/hang-up; Double short click mid button for
next track, Thrice short click middle button for
previous track;
3 Earphone audio output;
IV. Notice
a. Avoid direct sunlight, away from fire and heat.
b. Store in a dry place and avoid contact with corrosive
substances.
c. It’s forbidden to violently pull, knock, break, scratch
and cut etc. phenomenon of use.
d. Follow the instructions in this manual to ensure
proper use.
e. Do not disassemble.
Lightning earphones
MFi certified
User manual
TLL162022
Disposal and recycling information
The crossed-out wheeled-bin symbol on your
product, battery, literature or
packaging reminds you that all electronic products and
batteries must be taken to separate waste collection
points at the end of their working lives; they must not
be disposed of in the normal waste stream with
household garbage.
It is the responsibility of the user to dispose of the
equipment using a designated collection point or
service for separate recycling of waste electrical and
electronic equipment (WEEE) and batteries according
to local laws.
Proper collection and recycling of your equipment
helps ensure WEEE waste is recycled in a manner that
conserves valuable materials and protects human
health and the environment, improper handling,
accidental breakage, damage, and/or improper
recycling at the end of its life may be harmful for
health and environment.
Declaration of conformity
We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest,
Sector 1, Marinarilor street, no. 31, declare on own
responsibility that this product does not endanger life,
health, work safety, does not have a negative impact on
the environment and corresponds to the standards
stated in the manufacturer's declaration of conformity.
The product is made in compliance with the following
standards and / or other normative documents:
EMC – 2014/30/EU
Applied standards:
EN 55032:2012
EN 55032:2015
EN 55024:2010
EN55024:2010A/A1:2015
The product bears CE mark
applied in 2018.
Place and date:
Bucharest, 24.04.2018
III. Instruction
III. Instruction
1
2
3
b. Store in a dry place and avoid contact with corrosive
c. It’s forbidden to violently pull, knock, break, scratch
The product bears CE mark
The product bears CE mark
applied in 2018.
applied in 2018.
Place and date:
Bucharest, 24.04.2018
Bucharest, 24.04.2018
/