RCA RT2760 Quick start guide

Brand: RCA

Model: RT2760

Type: Quick start guide

RCA RT2760 home theater receiver delivers immersive surround sound with a variety of features to enhance your entertainment experience. Connect your DVD, VCR, satellite receiver, and other audio components to enjoy your favorite movies, music, and shows with rich, dynamic audio. The receiver features multiple surround sound modes, including Dolby Pro Logic II Movie, Music, and Emulation, to customize your listening experience. Fine-tune the sound with adjustable speaker levels, distances, and subwoofer settings.

Quick Start Guide

RT2760

1. ON/STANDBY

Turns the unit on and off. When the

system is turned on, the unit will go to the

mode it was in before powered off.

2. Play/Pause

Starts and pauses playback in USB mode.

3. Stop

Stops playback in USB mode.

4. PRESET Buttons (PREV/NEXT)

Selects preset stations in AM/FM mode. Directly accesses the

previous or next track in USB mode.

5. SURROUND Buttons

Select digital sound processor. (DOLBY PL II MOVIE, STEREO,

DISCO, STADIUM, THEATER, JAZZ CLUB, ARENA, 3 STEREO,

DOLBY PL EMULATION, DOLBY PL II MUSIC)

6. USB Slot

Connects USB devices.

Using the Remote Control

1. ON•OFF

Turns the receiver on and off.

2. Number Buttons

Directly accesses a preset station in AM/FM mode.

3. MEMORY

Stores station in AM/FM mode.

4. MONO/ST

Selects between Stereo and Mono sound in FM mode.

5. TEST TONE

Speaker Test tone setting. Refer to “Advanced Sound Control” for details.

6. NIGHT

Selects among Night mode options (DRC OFF, SOFT and ON) which compresses the volume difference

between normal voices and sounds such as explosions. (Available only during Dolby digital signal

playback)

7. EQ

Selects among preset Equalizer mode. (only available in stereo mode)

8. SURROUND

Selects digital sound processor. (DOLBY PL II MOVIE, STEREO, DISCO, STADIUM, THEATER, JAZZ CLUB,

ARENA, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC)

9. SETUP

Enters Setup mode. Use the Left and Right adjustment buttons to select among setup options.

(DIMMER, CENTER SPK ON/OFF, SURROUND SPK ON/OFF, FRONT SURROUND ON/OFF, DIGITAL INPUT).

10. DISTANCE

Adjusts the speakers’ distance.

11. Adjustment Buttons

• Press the Left or Right buttons to select among setting items in setup mode: DIMMER, SPEAKER

DISTANCE, SPEAKER SETUP, FRONT SURROUND ON/OFF and audio input source (OPTICAL / COAXIAL).

• Press the Up or Down buttons to adjust the values when the display shows the setup you want to

change.

In AM/FM mode:

• Press the TUNER - and TUNER + keys to tune down or up the radio frequency.

12. MUTE

Mutes all audio output.

13. SUBWOOFER

Selects among subwoofer sound level. (SOFT SUBWOOFER, BALANCE SUBWOOFER, STRONG

SUBWOOFER, POWERFUL SUBWOOFER)

14. LEVEL

Speaker LEVEL setting. Refer to “Advanced Sound Control” for details.

15. VOL + / VOL - (Volume Buttons)

Adjusts the volume level.

16. CH+ / CH- (PREV/NEXT)

Selects programmed stations in AM/FM mode. Directly accesses the next or previous file in USB

playback mode.

17. Operation Buttons

• PLAY,STOP and PAUSE key are only for control of USB device.

• Press REV or FWD Starts reverse or forward accelerated play in USB mode.

18. DISPLAY

Accesses MP3/WMA ID3 information and current play time, current play Folder, Track number and

Play Mode in USB mode.

19. REPEAT

Accesses the repeat function in USB mode.

20. RANDOM

Turns on/off random playback in USB mode.

21. INTRO

Enters intro mode in USB mode.

22. SLEEP

Enters sleep mode and selects sleep time.

23. Source Buttons

Selects various audio sources.

Thomson Inc.

10330 North Meridian Street

Indianapolis, IN 46290a

Trademark(s)® Registered

Marca(s) Registrada(s)

Printed in China

TOCOM 5626421A

7. LINE IN

Connects components for audio input.

8. SOURCE Buttons

Select sound source. (DVD/DVR, TV, SAT.CAB, AM/FM, VCR, USB

and LINE-IN)

9. VOLUME

Increases and decreases volume level

10. SUBWOOFER

Selects among subwoofer sound level. (SOFT SUBWOOFER,

BALANCE SUBWOOFER, STRONG SUBWOOFER, POWERFUL

SUBWOOFER)

11. PHONES

Plug your headphones (not supplied) into it for your private

enjoyment. Speakers will be off when phones are inserted.

RT2760 QSG EN A ver. 15/3/06 11:17 AM Page 1

Connecting the speakers

Six speakers are provided with the unit (2 front, 1 center, 2 rear, 1 subwoofer). To achieve good

surround effects, all six speakers need to be connected to the receiver.

Speaker wires are color-coded to match the terminals.

Note: When connecting subwoofer, connect subwoofer control cable to the unit’s rear panel first,

then press the power switch on the subwoofer speaker to switch it on.

Positioning the speakers

Factory defaulted Advance setting indication from VFD

The receiver has defaulted the following distances:

Front speakers (FRNT) 15 ft

Center speaker (CNTR) 15 ft

Surround speakers (SURR) 10 ft

Speaker Configurations

You can also change the setup of the speakers.

Use a subwoofer to enjoy optimum sound.

• Speaker distance: For optimum surround experience measure the distance

between the speaker and your favorite listening position.

1. Press the SETUP or DISTANCE button to show setup options.

2. Press the Left or Right adjustment

buttons until the speaker you want to change is displayed.

3. Press the Up or Down arrow buttons to change the speaker settings.Your

selection will be stored automatically.

4. Repeat step 2 and 3 to set up the next speaker.

5. When set up is done, wait for 5 seconds to automatically save your settings

or press any key to save your selection and set up mode.

Connecting to Audio Components

COAXIAL OPTICAL

DVD SAT/CAB

R/S

L/S

Rch

Cch

Lch

Front

Left

Rear

Right

Rear

Left

Front

Right

Center

Center Speaker selection (CTR) YES / NO

Surround Speaker selection (SURR) YES / NO

Front Speaker distance (FRNT) 3-40 ft

Centre Speaker distance (CNTR) 0-40 ft

Surround Speaker distance (SURR) 0-40 ft

Note: By default, the Center and Surround Speakers are set to

YES. If you decide not to use them, set the ones you do not

intend to use to NO so the sound performance is not affected.

DIGITAL CONNECTION

If you have a SAT receiver or DVD player with a digital output, you can make use of an optical digital cable (not supplied)

or coaxial digital cable (included) to carry the audio portion of the signal and enjoy Dolby Digital sound quality. One

optical or coaxial cable is needed for each SAT receiver or DVD player. When optical or coaxial cable is used, the analog

audio cables are still needed if recording through a VCR is desired. This receiver provides one optical and one coaxial

digital input for the connection of your components. Please connect your components (e.g. DVD or SAT) to the appropriate

digital inputs and press SETUP to select the corresponding digital input source.

Note: Optical and COAXIAL cables carry only the audio portion of the signal.

RT2760 QSG EN A ver. 15/3/06 11:17 AM Page 2

RCA RT2760 Quick start guide

RCA RT2760 Quick start guide

RCA RT2760 Quick start guide

Related papers

Other documents