2. Winners Only
  3. DP556

Winners Only DP556 Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Winners Only DP556 Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DC355G,DC355R,DB556,DP556
ANR-17053-SHNWU1 MADE IN MALAYSIA
Page 1 of 2
DC355G-01
DC355R-01
DB556-01
DP556-01
DC355G-13
DC355R-13
DB556-13
DP556-13
DC355G-13
DC355R-13
DB556-13
DP556-13
DC355G-05
DC355R-05
DB556-05
DP556-05
DC355G-05
DC355R-05
DB556-05
DP556-05
DC355G-06
DC355R-06
DB556-06
DP556-06
DC355G-06
DC355R-06
DB556-06
DP556-06
DC355G-08
DC355R-08
DB556-08
DP556-08
DC355G-08
DC355R-08
DB556-08
DP556-08
BENCH
Thank you for purchasing this quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the carton during shipment.
COMPONENT LIST: HARDWARE LIST:
Flat Washer
Allen Key
Lock Washer
JCBC Bolt
(Short)
JCBC Bolt
(Long)
1 pce
4pcs
8pcs
12pcs
12pcs
PART NO FIGURE DESCRIPTION QTY
1
2
3
4
5
Hardware Bag
Bench Seat
Bench Left Leg
Bench center Leg
Bench Right Leg
1 pce
1 pce
2 pcs
2 pcs
2 pcs
PART NO FIGURE DESCRIPTION QTY
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or more people are needed for assembly
2 please keep all hardware parts out of the reach of children.
WINNERS ONLY
DC355G,DC355R,DB556,DP556
ANR-17053-SHNWU1
BENCH
MADE IN MALAYSIA
Page 2 of 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
WINNERS ONLY
ASSEMBLY :
STEP 1
STEP 2
3.1- Turn bench to upright position.
3.2- Once bench is fully balance fully tighten all bolts.
STEP 3
Assembly is now Completed.
2.1- Attach 2 Center legs to the middle of Bench seat using the provided hardware as shown in Fig.2.
1.1- Turn the Bench Seat upside down on a soft protective surface such as carpet.
1.2- Attach 4 Bench legs to the Bench seat using the provided hardware as shown in Fig.1.
Allen Key
Allen Key
JCBC Bolt
(Long)
JCBC Bolt
(Short)
Lock Washer
Lock Washer
Flat Washer
Flat Washer
Fig.1
Fig.3
Fig.2
/