Relax-A-Lounger EVANDER Assembly Instructions

Hello! I've reviewed the assembly instructions for the EVANDER WITH ROLL ARM sofa. The document covers how to put the sofa together safely, including mounting the legs, frame and backrest. It also shows how to convert your sofa into a bed. I'm ready to assist you with any questions you might have about assembling or using your sofa.
How many adults are required for assembly?

What could happen if not assembled by two adults?

How to convert the sofa to a bed?

8 of 8 Rev.10132016

EVANDER WITH ROLL ARM

TOLL FREE 1-877-693-8866 LIFESTYLE SOLUTIONS

R

PARTS AND HARDWARE

Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.

7 of 82 of 8

M8 x 30mm

Bolt

x 2

M8 x 40mm

bolt

x 6

M8

Nut

x 2

M8 x 22mm

Washer

x 6

Seat Body

x 1

Backrest

x 1

Back Cushion

x 2

Pillow

x 2

Wood Leg

x 4

Arm

x 1 Pair

14mm

Spanner

x 1

M5

Allen key

x 1

3 of 8

ASSEMBLY INSTRUCTIONS

CAUTION: At least two adults are required to safely perform this task.

Other lifting attempts may risk back injury due to large and heavy part(s).

Carefully place arms and wood legs as shown below, secure the legs by screwing

into pre-drilled holes on the bottom of arm by hand. Please avoid overtightening.

Assemble the backrest onto the frame legs with short bolts and nuts by provided

allen key and spanner.

6 of 8

Align arms and metal frame , secure with a long bolt and washer at the

pre-drilled holes on the arms with provided allen key.

3

Place both back cushions and pillows on assembled sofa body.

4

5 of 8

4 of 8

Converting to bed

OPERATING YOUR UNIT

Remove the back cushions and pillows first,standing at the front of the unit (from sofa

position), lift the seat cushion pull out until it can not move.

Push over the backrest on to metal frame. Adjust the gap between the seat cushion and

backrest . Then place your back cushions and pillows.

/

Other documents