Swiss Madison SM-BV811-CSM-BV811-C, SM-BV811SM-BV811, SM-BV83MBSM-BV83MB Installation guide

  • Hello! I've reviewed the Swiss Madison Ivy Vanity user manual. This document provides detailed step-by-step instructions on how to assemble the vanity, including connecting panels with cam bolts and locks, and installing the aluminum frame. I'm ready to assist you with any questions you have about the assembly process or the vanity's features.
  • How many cam bolts are needed for the left side panel?
    How many cam locks are used to connect the Rear bottom panel to the Bottom panel?
    How many M4*10 screws are used to connect the 25*25*550 aluminum bar (2) to the aluminum frame (1)?
Vanity
Base
1:Left side panel
2:Right side panel
3:Top panel
4:Bottom panel
5:Rear top panel
6:Rear bottom panel
7:Left-side inner panel
8:Door panel
A.Cam bolt
B.Cam lock
C.Cam patch
65mm
Screw 6 cam bolts (A)into the left side panel(1) .Repeat for the right side panel(2)
Screw 7 cam bolts(A)into the top panel(3)
Screw 3 cam bolts(A)into the bottom panel(4)
1.Install cabinet panel
Connect the Rear bottom panel (6) to the Bottom panel4Use 2 cam locks (2) to secure in the place
Connect the left-side inner panel(7) to the bottom panel(4) Use 1 cam locks (2) to secure in the place
Attach the bottom panel and rear top panel to the left side panel (1) and secure using 6 cam locks (B)
Repeat the process to the right side panel (2) using an additional 6 cam locks (B)
2.Assemble bottom panel
3.Assemble base
Attach the Top panel (3) to the side panel and Rear top panel(5) use 7 cam locks (B) to secure in
the place
Connect the door panel(8) to the cabinet base with 3 cam locks(B)
4.Install aluminum frame
Connect the 25*25*550 aluminum bar (2) to the aluminum frame (1) use 8 M4*10 screw (4).
Connect the 25*25*550 aluminum bar (3) to the aluminum frame (1) use 4 M4*10 screw (4).
Note that the aluminum bar with hole (3 is installed at the bottom.
Attach the cabinet body(6) to the aluminum frame and secure using 6 M4*14 screw (5)
5
/