2. Pound Technology
  3. Challenger

Pound Technology Challenger Quick start guide

  • Hello, I've reviewed the user guide for the Challenger 16-bit console. This manual provides instructions on setting up the console, connecting it to your TV, and using its various features. I'm ready to assist you with any questions about its content or functionality.
  • What are the package contents?
    How do I connect the console to my TV?
    How do I get the console running?
    How many controllers can be connected?
©2018 Pound Technology Inc. All rights reserved.www.poundtechnology.com
CHALLENGER
SUPER 16-BIT CONSOLE FOR SNES CARTRIDGES
QUICK START GUIDE
v1.01
©2018 Pound Technology Inc. All rights reserved.www.poundtechnology.com
1.
4. 5.
6.
2. 3.
HELLO AND THANK YOU!
PACKAGE CONTENTS:
1. Composite Cables
2. USB to Micro USB cable
3. Challenger 16-bit Console
4. (2x) Challenger Controllers
5. AC Wall plug
6. HDMI Cable
For purchasing the Challenger 16-bit Entertainment
System by Pound Technology! To get you set up quickly,
please carefully read the instructions in this manual before
enjoying the console.
For troubleshooting, please contact us at
hello@poundtechnology.com
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
©2018 Pound Technology Inc. All rights reserved.www.poundtechnology.com
1.
2.
3. 4.
5. 6.
7. 8. 9. 10. 11.
CHALLENGER LAYOUT
FRONT:
1. Cartridge slot
2. Eject Button
3. Power Button
4. Reset Button
5. Player 1 Controller Slot
6. Player 2 Controller Slot
REAR:
7. PAL/NTSC Toggle Switch
8. Composite Cable Ports
9. HDMI Port
10. Aspect Ratio Toggle Switch 4:3 or 16:9
11. Power port
©2018 Pound Technology Inc. All rights reserved.www.poundtechnology.com
OR
HDMI COMPOSITE
CONTROLLER 1 CONTROLLER 2
TO AC
CONNECTOR
TV
CHALLENGER SETUP
INSTRUCTIONS:
1. Insert HDMI or composite cable into your television
2. Insert other end of the respective cable into the Challenger Console
3. Insert the AC adapter into the wall and plug the USB cable into it
4. Insert the micro USB end of the cable into the Challenger Console
5. Insert at least one controller into controller port labeled “1”
6. (optional) Insert second controller into port “2”
7. Insert game into cartridge slot
8. Select NTSC or PAL based on cartridge type
9. Select preferred aspect ratio (4:3 or 16:9)
10. Press the power button and enjoy retro bliss!
/