•Do not dismantle the housing or modify the product.
Dismantling the housing or modifying the product may result
in electrical shock or burn.
1. Connect the DVI sources to splitter’s input ports.
2. Connect the DVI display to splitter’s output port.
3. Connect the 5V DC power supply.
4. Select the PC or HDTV function switch for your use.
•Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening
or removing housing may expose you to dangerous voltage
or other hazards.
Specifications
• Connecto
•Keep the product away from liquids.
Spilling into the housing may result in fire, electrical shock,
or equipment damage. If an object or liquid falls/spills into
the housing, unplug the product immediately.
- Input : 1 DVI 24pin- single link(female)
- Output : 2 or 5 DVI 24pin -Single link(female)
• Video Bandwidth : 1.65Gbps (Single Link)
Have the product checked by a quali
ied service engineer
before using it again.
•Do not touch the Product with wet hands.
Touching the housing and plug with wet hands is dangerous
• Supporting Resolution : Up to WUXGA(1920x1200), 1080p
• Power Consumption : MAX 3W (1x2 Splitter)
MAX 5W (1x5 Splitter)
and can cause electrical shock.
• Power Supply : 100~240V with DC 5V Adapter
• Dimension :
-DMD-H102 : 170W x 100D x 25H (mm) / Weight : 467g
-DMD-H105 : 300W x 118D x 25H
• Environment
- Operating Temperature Range : 0 to 50°C
- Storage Temperature Range : -20 to 70°C
www.ophit.com 5www.ophit.com4
DMD_101005.indd 5 2010-10-05 �� 3:25:23