Herzborg BG-H-7R03 Operating instructions

Brand
Herzborg
Model
BG-H-7R03
Type
Operating instructions
WIRELESS
RECEIVER MODULE
OPERATIONS GUIDE
From The German Quality
For More Information, Please Visit Our Website
www.herzborg.de
MODEL BG-H-7R03
WIRELESS
RECEIVER MODULE
Receiving wireless remote control signals(ID system 868M) to Bus;
receiving Bus signals to wireless devices (ID system 868M lights,
motors); up to 8 address remote controls or 8 receiver modules can be learned.
MAIN FUNCTION
SPECIFICATION OF WIRELESS
RECEIVER MODULE
Smart Module
Introduction
01
Smart Module
Introduction
02
From The German Quality
For More Information, Please Visit Our Website
www.herzborg.de
· Product Name:wireless receiver module
· Product Model:BG-H-7R03
· Working Temperature:1055
· Humidity: 10% -90% relative humidity,
non-condensing
· Supply voltage: DC24V
· Working current:30mA
· Group Pulse: 2KV
· insulation voltage: 2KV
· Interface: Bus
· Wireless distance: 30 meters
· Number of input channels: 8-way
wireless devices can be forwarded
· Quiescent Current: 20mA
· Learning wireless remote control:iPAD issues corresponding configuration command,
the converter receives a command into the learning state, waiting for the remote control
to issue commands to the code, and the learning time is 8 seconds.After learning success
or timeout exit.After successfully learning,send registration command to the host.
· Wireless devices for code:iPAD issued corresponding configuration command, the
converter receives a command into the code state,issues wireless code command
to the devices.After receiving the response of the wireless devices,send registration
command to the host.
· Operation:Learn from the remote control or code to the device, the same type of virtual
device, devices can be controlled by IT system .
INSTRUCTION
INSTALLMENT ENVIRONMENT
The installment should avoid wet environment, preventing
the unnecessary effect on devices.
WIRELESS RECEIVER
MODULE WIRING DIAGRAM
CIRCUIT INSTALLATION
INTRODUCTION
Smart Module
Introduction
04
Smart Module
Introduction
03
From The German Quality
For More Information, Please Visit Our Website
www.herzborg.de
Power Net
Gnd B A 24V
Smart Module
Introduction
06
Smart Module
Introduction
05
ABOUT SHIPMENT
ABOUT AFTER-SALES SERVICE
The product packed in box can be shipped with any transportation
under the condition of avoiding the direct impact from rain,snow,
striking with intensive force,etc.
If there is any malfunction, the product should be sent to the service
sites to repair or you can contact the customer service department of
the company. The non-professionals are
not allowed to open it.
ABOUT CLEANING
ABOUT STORING
ABOUT INSTALLATION
Please read the Product Instruction carefully before installaton for the
first time.
The product should be placed in a clean and dry place to prevent the
internal components from moisture or entering of other debris to into
make an impact on using effect. When the surface stained with dirt,
then dry with a fine cloth. Do not use cleaning fluid with causticity and
other chemical solvent.
The product packed in box should be placed in ventilated and dry place
without corrosive gas to storage. The stacking height is less than ten layers,
and the storage temperature is-10 ~ + 40
From The German Quality
For More Information, Please Visit Our Website
www.herzborg.de
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Herzborg BG-H-7R03 Operating instructions

Brand
Herzborg
Model
BG-H-7R03
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents