Auna IR-110 User manual

Category
Radios
Type
User manual
14
Dear Customer,
Congratulations on purchasing this product. Please read and follow these instructions, in order to avoid
damaging the item. We do not cover any damages that may arise from improper use of the item or the
disregard of the safety instructions.
Important Safety Advice
Read all instructions before using.
To protect against a re, electric shock or personal injury, do not immerse cord, electric plugs or device
in water or other liquids.
Do not expose the appliance to extreme temperatures. The appliance shall be used in moderate cli-
mates.
The use of attachments that are not recommended by the appliance manufacturer may result in re,
electric shock or personal injury.
Do not open the unit by removing any cover parts. Do not attempt to repair the unit. Any repairs or
servicing should be done by qualied personell only.
Only qualied persons may perform technical work on the product. The product may not be ope-
ned or changed. The components cannot be serviced by the user. The manufacturer is not responsible
for any radio or TV interference caused by unauthorized modications.
The appliance is not a toy. Do not let children play with it. Never let children insert foreign objects into
the appliance.
Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical pro-
ducts. Instead, use a soft, dry cloth or soft brush.
Save these instructions.
Small objects
Keep small objects (i.e. screws, mounting material, memory cards etc.) and packaging out of the range of
children. Do not let Children play with foil. Choking hazard!
Transporting the device
Please keep the original packaging. To gain suicient protection of the device while shipment or transpor-
tation, make sure to put it back in its original packaging.
Cleaning the surface
Do not use any volatile liquids, detergents or the like. Use a clean dry cloth.
16
Front:
1 Speaker
2 Display
3 Menu / Standby
Hold to switch on/o
Press to enter menu
4 Up Navigate through lists or menues
5 SEL / FAV
Select / conrm current selection
Radio mode: Show favourites/add to favourites
6
7
8
Left
Down
Right
Navigate through lists or menues
Rear:
9 DC 5V In
10 Headphones Out
11 USB socket
17
Initial Use / Setup
Insert the adaptor plug into the DC socket located at the rear side of the radio. Plug the adaptor into
a wall socket outlet.
Caution: Use only the adaptor supplied with the radio. Connecting a power supply with a dierent
rating will cause permanent damage to the radio and may be hazardous.
Press STANDBY to switch on.
Congure your radio
After initially turning the device on, you will be prompted to select the menu language.
Use the arrow buttons to do so, and conrm by pressing SEL. All menues are to be operated in
this particular way.
Next, you will be asked whether the option "Check Network when Power on" shall be activated.
Select YES to automatically connect the radio to your WiFi for future use.
In the next step, congure your network, or skip this step by selecting NO. In the latter case, continue
with setting the time (also, using the arrow buttons and SEL).
To congure your network now, select YES, or YES WPS if your network is WPS protected. You can also
access all network congurations to a later time via the main menu.
After a short search, a list with WiFi networks within range will be displayed, as you may know it from
your smartphone or tablet. From this list, select your WiFi, then enter your WiFi password to connect
(arrow buttons and SEL).
If your WiFi router is equipped with a WPS button, you can select the WPS PBC option to connect. In
this case you only have to press the WPS button on your router within 2 minutes to connect.
Your auna radio is now ready to use.
18
Main Menu and Functions
Navigate through the main menu, using the arrow buttons and SEL. From here, you can access the main
functions and menues My mediaU, Internet Radio, Media Center, DAB, FM, Information Center and
Congurations with their sub menues:
Standby
Main menu
My mediaU <--> Sub menu
| |
Internet Radio <--> My Favorites
| | Radio Station / Music
| | Local Radio <--> Sub menues
| | History
| | Service
| |
Media Center <--> UPnP <--> Sub menues
| | My Playlist
| | Clear My Playlist
| |
| |
Information Center <--> Weather
| | Finance <--> Sub menues
| | System
| |
Congurations <-->
Manage My MediaU - Network - Date & time
Alarm - Language - Dimmer - Power
Management - Sleep Timer - Buer - Wetter
FM Setup - Playback Setup - Local Radio Setup
DLNA Setup - Equalizer - Res. When Power On
<--> Sub menues
19
Menu: Congurations
Mode
Set the clock mode display in Standby. Select Internet Radio to set the analog
clock Standby or Select Clock Radio to set the digital clock in Standby.
Manage My MediaU
When it is enabled, My mediaU will exist on the main menu. If various mediaU
accounts exist in the IR-110, Select the default login account in here.
Network
Wireless Network Conguration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required
AP. Enter WEP or WPA code to connect the WiFi. If it is accidentally pressed
<- to move a redundant entry, press -> to correct.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS but-
ton, you may set up the network connection simple via WPS function. Enter
it and go to press the WPS/QSS button on your router within 120 seconds.
The connection between the router and Music Link will then be congured
automatically.
Manual Conguration: You can choose DHPC (which IP assigned automati-
cally) or manually input IP address for wireless network connection. When
you select manual setting for wired connection, the following have to be
entered: SSID (name of access point), IP Address, subnet mask, default gate-
way, preferred DNS server, alternate DNS server. You may choose (Manage)
specic network if you have setup more than one network connection within
an area.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP. Select required AP. Enter WEP or WPA code to connect the WiFi. If the
wireless network connection is not existing or fails, the icon at the top left
corner will have a cross on it.
Time & Date
Setup the date and time; set time format display as 12 Hour or 24 Hour; set date
format: YY/MM/DD, DD/MM/YY or MM/DD/YY.
Turn on/o the Daylight Saving Time (DST). With a wireless network con-
nected, GMT (+00:00) time is a time reference of time setting.
Add or deduce the hour according to your time zone when you set the time.
Language
Select the desired OSD language (English, German, Spanish, French, Portuguese,
Italian).
Dimmer
Congure the brightness of backlight on the display. Select Standby to set the
brightness of backlight in standby mode, and select Active to set that in opera-
tion mode.
Choose Dimmer Timer to set the duration of the radio changing backlight when
you are not controlling it.
Display Set the display to Color display or Monochrome display.
Power Management
Congure to go to standby mode automatically during in the menu or/and wit-
hout Wi signal. Choose the power management timer (5/15/30mins) to set the
duration of the radio to switch standby mode automatically when you are not
controlling it. Choose Turn o to ignore the power management function.
20
Sleep Timer
Turn o or set the sleep time of 15/30/60/90/120/150/180 minutes. Once the
time is set, there will be a bed icon with remaining minutes at the top right corner
and the device will turn to standby then. Press Sleep on the remote control for
the shortcut of this function.
Buer Congure the buer time of the music playback, 2/4/8 seconds.
Waeather
Activate/deactivate the weather forecast for the standby display. Choose your
preferred temperature unit (°F or °C) and then proceed entering your location.
When activated, the weather forecast is shown in turns with the clock display on
the standby screen (each 10 secs).
Local Radio Setup
There is a shortcut Local Radio under Internet Radio so that you can easily go
to the station list of your location. You may Manual Setup your location, or let
the system Auto Detect your current location. The system detects the location
according to the IP address of your connected network. Press Local Station to
enter this local radio list directly.
Playback Setup
Select the playback mode of media center – O (no repeat or shule), Repeat all,
Repeat one, or Shule.
DLNA Setup
Default device name for DLNA is CONNECT100. You may rename it for DLNA setup
on the PC or mobile.
Equalizer
Default equalizer is Flat, you may change to Normal, Flat, Jazz, Rock, Movie, Clas-
sical, Pop, or News. Press EQ on the remote control to swap among the EQ mode
for shortcut.
Resume When PWR
The system is default to resume internet radio playback if you were listening to
internet radio or media center before switch o the unit. If turn this setting o, the
system will remain in the main menu when switching on the unit.
Software Update
Update software. If there is an updated software version on the server, the system
will notify you when you return to the main menu.
Reset
Restore the default settings. After the CONNCET100 is reset, the system will move
to language setting menu. And it will automatically turn to network setting menu
once the OSD language is elected.
Information Center
Weather
There are weather information and forecasts for 2000 cities. Select the country
and then the city for the weather details. Press <- / -> to see the weather fore-
casts. The device is able to display the weather information on the standby mode.
On the weather information page, press Select to set the city to displaying on the
standby mode. Then turn on the weather display.
Finance View the stock index from around the world.
System
Check out the version of the system, and the details of connected network. The
information includes MAC address which you are required to ll in when registra-
tion of my mediaU membership.
21
Media Center
UPnP
If you have set up shared media, you should see the shared media from UPnP.
If you have more than one computer sharing media, the alternatives are listed.
Select the shared media you want to play. Use Play/Pause, Next/Prev and Stop
Press Info to view the display information of the playing track.
Hints: The radio can only read the track with the le name less than 40 charac-
ters. The characters should be in European language. If you encounter failure of
reading the track under UPnP mode, you may try to rename the le. However, if
the track is still unable to play, you can try converting the le to dierent formats.
My Playlist
You can create a playlist of favourious music from UPnP. When you playing the
music, press and hold Select to save it into My Playlist.
Clear My Playlist You can remove all the saved music under My Playlist.
USB Playback
From this point on, menus are generated from the folders on the USB device.
Browse folders with the NAV wheel or direction keys on the remote control. The
display shows folder and le names (not necessarily track names).
Once you have found a track you want to play, press the navigate reel on the
device or press OK on the remote control.
Note: The USB port does not support charging or data transfer with a computer.
Streaming & App Operation
IR-110 is the default device name for DLNA, and you may rename it as you like. The information below is the
introduction of how to setup up media streaming from PC or other media server. Study the own instruction
of the software or apps you use to enjoy music streaming if necessary. Make sure the music les are in the
format of MP3, WMA, WAV or AAC for music streaming to the IR-110.
UPnP
To enjoy the streaming music from PC, the following steps are to be done on the PC:
Connect the PC to the network.
Ensure the IR-110 is powered on and connected to the same network.
Open the UPnP platform Windows Media Player (11 or later). Alternatively, other platforms or server
such as Windows Media Connection may be used.
Allow to share your media to IR-110.
Add the audio les and folders you want to share with IR-110 to the media library.
You may also enjoy the streaming music from other music server, such as smart phone (Android platform):
Connect the mobile to the network
Search and install media sharing apps from Google Play.
Add the audio les from your mobile you want to share.
After setup the shared server, choose the music and control playback on the IR-110.
22
DLNA Function
Besides UPnP, IR-110 supports DLNA function, you share the music les from PC or Android mobile,
and you use your PC, Android mobile or iPhone / iPad to control music playback on the IR-110. (It is not
required to control each playback on the IR-110.)
The PC system requirement for DLNA is Windows 7 and Windows Media Player 12. Setup as below:
First, share the media on your PC to IR-110.
Control Panel > Network and Internet > Network and Sharing Center > Media streaming options
Open Windows Media Player to enable Allow remote control of my Player.
Right click any music in the library and choose Play to IR-110.
There will be a window for controlling music playback on IR-110.
You may search and install any free or commercial DLNA apps from Google Play or Apple Store if you
are using Android mobile, tablet or iPhone / iPad. It is suggested to use bubbleUPnP, Twonky Beam on
Android mobile, tablet or Twonky Beam on iPhone/iPad.
Some apps may not support streaming music from iPhone/iPod but iPhone/iPod could still be used to
control streaming music from other servers.
Procedures for playing shared music on the app are as follows:
Select IR-110 as the player. Some apps may allow to play the music to multi players at the same
time.
Select music server and choose the music. Some app can create a playlist if you choose several
music.
Please note: When using DLNA music streaming function on Music Link, you can only control the vo-
lume and standby via the unit. It is restricted to control the other functions. Stop DLNA on PC, mobile
or tablet before you resume Music Link’s own control.
23
Internet Radio
After successfully connecting to any internet radio station, the bit rate and the format will be displayed on
the display. Sub menues:
My Favorites
List of my favorite preset stations. It supports 250 favorite entries including sta-
tion and folder.
During the station playing screen, press and hold PRESET/BT on the device or
Preset on the remote control to save the station as my favorite. You may replace
the previous saved station to the new one.
If the Selected station have been saved, you cannot save it again.
The saved stations are showed under this menu. You may also press PRESET/BT
or Preset to enter the saved station list. You may enter the number key on the
remote control to recall the saved station
Under the preset station list, move to your station, press Select to listen. You
may also press -> to enter its submenu to Delete, Shift Up/Down along the list,
Rename, Play, or Use as Alarm Sound (if you chose internet as alarm sound in
alarm conguration).
Radio Station / Music
Stations are categorized into Global Top 20, Genre and Country/Location (Aus-
tralia, Canada, United Kingdom, USA). Enter to continue the subcategories and
choose the station to listen.
For each station, press Select to play directly. Press -> to enter its submenu.
When you choose Auto Scan, it becomes the playback of marquee for each sta-
tion in the subcategory. Each station plays 30 seconds until all have played or
you press Select to stop the marquee listening. Press Info to view the display
information of the playing station.
Local Radio Access the internet broadcast of your local radio stations.
History List of the ten recently listened stations.
Service
Search radio station - Enter your keyword to search radio station from the list.
Add new radio station - The added stations will be stored in My Favorite. Note
that the maximum character of the station name is 250.
Remote control via App
Some apps for Android, e.g. Air Music Control, allow you to control the internet radio from your smartphone
or tablet.
As soon as the devices are connected, the same menu structure shown on the Internet radio will appear on
the smartphone/tablet. You can select all functions just like on the radio. The selected functions / menu
items shown on the radio will change according to the actions taken on your mobile device.
24
If you are controlling the Internet Radio via app, a UPnP connection to Windows Media Player may not be
possible.
After the smartphone is connected to the same network as the Internet radio connected, launch the app
“Air Music Control”. The App shows the main menu with Local Radio, Internet Radio, Media Center, Con-
guration, Information modes.
For further information on the Air Music Control app or similar products, as well as for hints concerning your
smartphone or tablet, please see the help les or user manuals supplied by the respective manufacturers
or distributors.
Environment Concerns
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will hep
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
detailled information about recycling of this product, please contact your local council or
your household waste disposial service.
Declaration of Conformity
Manufacturer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European directives:
1999/05/EC (R&TTE)
2011/65/EU (RoHS)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Auna IR-110 User manual

Category
Radios
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages