Faber-Castell 6300000 Operating instructions

Type
Operating instructions

This manual is also suitable for

#6300000 • Magic Swirl Kaleidoscope
© Faber-Castell USA, Inc., Cleveland, Ohio 44125 • www.fabercastell.com
Designed in USA • M
ade in China • Conforms to ASTM D-4236 • Non-toxic Safe for Children
Need Help?
Call: 800-311-8684
e-mail: consumer@fabercastell.com
Chat or view FAQS & INFO online:
www.creativityforkids.com
#6300000 • Age 6+
Your kit includes everything you need to make your
Magic Swirl Kaleidoscope including two interchangeable
optic swirl tubes.
watch it glow!
A kaleidoscope is a unique optical toy, that uses mirrors to
reflect an array of colorful objects. These reflections make a
series of ever-changing symmetrical patterns. The kaleidoscope
tube allows the user to view this “art in motion”.
glow stickers
confetti
swirl
gel*
nozzle
tip
swirl
tube
swirl
tube
gasket
gasket
cap
cap
kaleidoscope
tube
Charge your glow-in-the-dark
stickers under a bright light.
Turn off the light and watch
your Kaleidoscope and swirl
tubes glow in the dark.
*Our “swirl gel” is made from safety-tested glycerin
Lets get started!
You will need water and some paper towels
for quick clean up as needed.
swirl gel
(glycerin)
water
nozzle
tip about
1 in /
2.5 cm
Fill rest
with
swirl gel
mixture
about .5 in / 1 cm
Fill the bottle of swirl gel
to the top with water.
Add the nozzle tip and
reseal. Cover nozzle tip
with your fingertip and
shake to mix.
Now comes the fun
part! Select your
confetti and add
them to the swirl
tube up to 1"/2.5 cm
from the bottom.
For best results,
layer to create
a variety of colors,
textures and
shapes throughout
the tube.
fill your swirl tubes
decorate
view
2
1
1
2
3 4
5
Fill the rest of the swirl
tube with the swirl gel
mixture (leaving about
.5" / 1 cm of space at
the top).
Close tube with cap.
Rotate tube to mix.
Repeat steps 1-4
with 2nd swirl tube
Here are some fun themes to try.
You can also mix and match
the confetti however you like!
Use glow stickers to decorate the outside of the
kaleidoscope tube, and the swirl tubes.
Place one gasket near the
top of the swirl tube.
Slide the swirl tube into
the clear plastic section
of the kaleidoscope tube
as shown.
Add the 2nd gasket to the
bottom of the swirl tube.
As you rotate the
kaleidoscope, look through
the view finder. The swirl
tube will move back and
forth. As the confetti
moves through the swirl
gel, watch as they create
interesting colors
and patterns.
OUTERSPACE MAGICAL RAINBOW
  • Page 1 1
  • Page 2 2

Faber-Castell 6300000 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI