Sunricher SR-2201(US) User manual

Brand: Sunricher

Model: SR-2201(US)

Type: User manual

CDW Color DMX512 Controller

43.58 mm

65.58 mm

09.2201U.04469

Speed down, press and hold

down to decrease running speed

Function introduction

Important: Read All Instructions Prior to Installation

Speed up, press and hold down

to increase running speed

Kelvin running, click to

start running, click again

to pause

Brightness up/down, press

and hold down to increase/

decrease light intensity

Click to switch on/off

Color wheel, click or slide touch

to choose a color temperature

Front side

Back side

DC Power input

DMX512 signal output

Save 6 colors, press and hold

down to save the color/effect,

click to recall the saved

V- D+D-V+ GND

DC INPU T DMX OUT PUT

DMX512 Wall Panel

Controller

83.00 mm

19.4 mm

Wiring diagram

12-24VDC

PSU

12V/24V/36V

CV PSU

V+

V-

OUTPUT

Conne ct wi th CD W LED S tri p

V+ V+

WW- WW-

NW- NW-

CW- CW-

AC 100-240V

Output Signal DMX512 signal

Power Supply 12-24VDC

Power consumption < 20 mA

Operating temperature 0-40°C

Relative humidity 8% to 80%

Dimensions 75x120x29.2mm

• Touch sensitive

• Glass interface(white & black)

• Standard DMX512 Signal output

• Control CDW color(all white color)

• Waterproof grade: IP20

Product Data

D1 D1 D2 D 2

DMX51 2 Decod er

GND

whit e

0-5 0-9 0 -9

Conne ct wi th LED Str ipCDW

V+ V+

WW- WW-

NW- NW-

CW- CW-

D1 D1 D2 D 2

DMX51 2 Decod er

GND

whit e

0-5 0-9 0 -9

• DO NOT install with power applied to device.

• DO NOT expose the device to moisture.

Safety & Warnings

V- D+D-V+ GND

DC IN PUT DMX O UTPUT

DMX51 2 Wall P anel

Contr oll er

1. Set DMX Address

Set all DMX Decoder as DMX Address 001

3. Save color

1)Touch color wheel to choose the color

2)Press and hold down a target number over 3 seconds until LED light connected with the DMX decoder

flashes, the color is saved successfully, which will cover the default setting colors.

2. Default setting colors

100% Warm white 50% warm white +50% cool white

100% Natural white 50%Natural white +50% cool white

100% Cool white 50% Cool white +50% warm white

Press and hold down key to restore to default setting colors as follows:

Operation

4. Recall the saved colors

Turn on the DMX master controller and click any of numbers of 1, 2, 3, 4, 5 and 6 to recall the saved colors.

Installation

Sunricher SR-2201(US) User manual

Sunricher SR-2201(US) User manual

Sunricher SR-2201(US) User manual

Related papers

Other documents