Bioland G-423B Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Bioland G-423B Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
G-423B
Accessories Available from Dealer:
Model G-423BS
Model G-423L
Test Strips,
50 pcs/Pack/2 Vials
Sterile Lancet,
50 pcs/Pack
Install Lancet
Insert Test Strip
Apply Blood Sample
Read Result in 10 seconds
0
X 1
X 1
X 1
X 1
X 1
X 1
X 10
X 10
(Pre-installed.)
Meter User's Guide X 1
Bag
RS232 Cable and software are optional parts not included.
Time(hh:mm)
Date(mm/dd)
Battery low
Unit of glucose
Strips icon remind to
insert strips
Ok to indicate
meter coding completed
Memory mode
icon
Temperturae out
of Range icon.
Blood Icon Ready to apply
Blood Sample for Test
measurement
CR2032
Slide to open the battery
cover by pushing on the
arrow mark.
Replace
(CR2032)
Use a pen or other small stick,
gently push the battery out of
the battery socket.
bag
the authorized dealer.
The sequential number and its test result alternately display up
to one minute until the main button is pressed again. Then the
next sequential number and its test result appear.
When you see the 3 dashes (- - -) is displayed. It means that there
are no more readings. Press the main button again. and the meter
would be shut off.
mmol/L mmol/L
mmol/L
6) Data display example as below for reference - (your
data may different from following samples)
dealer.
bag
(10~40oC or 50~104oF)
/