Gill BOX COLLAR SPIKE PLATE KIT Operating instructions

  • Hello! I've reviewed document provided by you and i'm ready to assist you with questions you might have about the 71904 Spike Plate Kit. This document is instruction how to install the spike plates to the box collar using four tapped plates with velcro and 3/8" pyramid spikes, to help keep the collar in correct position . Feel free to ask me anything.
  • What comes in the Box Collar Spike Plates Kit?
    How many spikes should be installed on each plate?
    Where should the plates be placed on the box collar?
THIS WARNING IS GIVEN IN COMPLIANCE
WITH CALIFORNIA'S PROPOSITION 65:
WARNING
This product contains chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
each corner.
plates with velcro, and a bag of 3/8" pyramid spikes.
This will help keep the box collar in the correct position
during use. Larger spikes can be used if needed.
The Box Collar Spike Plates Kit comes with four tapped
Flip the box collar over.
Remove the backing from the velcro and stick one plate in
Install four spikes into each plate.
71904 - BOX COLLAR SPIKE PLATES KIT
www.gillathletics.com
Page 1 of 1
INST71904
7/11/2017
All rights reserved.
800-637-3090
Copyright 2017 by Gill Athletics.
CUSTOMER INSTRUCTIONS
Remove backing
/