2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Faucets
  6. Symmons
  7. SLS-0707-1.5

Symmons SLS-0707-1.5 Installation guide

  • Hello! I've reviewed the Installation Guide for the Symmons SLS-0707-1.5 Lavatory Faucet. This document provides detailed specifications, dimensions, and parts breakdown for the faucet. It also describes key features like the single-hole mount, ceramic cartridge, and metal construction. I'm ready to answer any questions you have about this faucet and the information in this guide.
  • What is the flow rate of the standard aerator?
    What material is the faucet made of?
    What type of warranty is offered for consumer use?
    What is included in the faucet?
    What is the warranty for industrial/commercial installations?
DS Creations
-1.0 1.0 gpm (3.8 L/min) flow restrictor
Model Numbers Specification
SLS-0707-1.5 (CDSLS0707-12-1.5)
Single Handle Lavatory Faucet
Installation Guide
SLS-0707-1.5
Single Handle Lavatory Faucet
Single Handle Lavatory Faucet featuring single hole mount
shall include quarter turn ceramic cartridge, braided hose
connections, metal drain assembly and 1.5 gpm
(5.7 L/min) aerator. Faucet shall be made from metal
construction, plated in standard polished chrome nish.
Dimensions
Measurements
A Ø 1-3/4", 44 mm
B 5-5/16", 135 mm
CDeck Ref.
Max. 2-1/2", 64 mm
DHole Size
Ø 1-1/2", 38 mm
E 5-15/16", 151 mm
F Min. 3/4", 19 mm
G3-3/4", 95 mm
H 2-3/4", 70 mm
Note: Dimensions subject to change without notice.
BB
CC
AA
GG
EE
DD
HH
FF
Modifications
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
CG
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2476 REV B ■ 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A Handle Kit RL-289
B Lift Rod RL-297
C Cartridge KN-4
D1.5 Aerator
1.0 Aerator
FLR-102-1.5-KIT
LN-742-KIT
E Spout Flange RL-298
F Metal Drain RL-154LR
G Mounting Hardware RL-237
A
C
B
D
E
G
G
GG
F
A
A
Notes:
1) Apply a bead of silicone around the perimeter of trim installed
ush to sink.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2 mm)
Plumber Tape
Plumber Putty
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
/