Skmei 1057 Watch Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Skmei 1057 Watch Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Operation Manual
A . Features:
6 Digits , Display Hour, Minute, Second, Month, Day and Week
Daily Alarm and Chime hourly
12/24H format selectable, Auto Calendar
1/100 second Chronograph with split functions
Dual time zone
EL backlight
B . Operational Manual:
1. At any mode, press A key for EL back light on 3s
2. Time Setting:
In Time Mode: Hod C two seconds enter into Time Setting Mode, and the "Second" flashing, press B keys to
zero.Press C the "Hours" will flash, press C key again and again to select the "Minutes" or "12/24H", press B to
adjust
When settings " seconds " ,less than 30 seconds will back to zero ; More than 30 seconds, minutes will plus 1.
When setting mode, Hold on B to activate the auto-run feature .
When setting mode, if no operation for 60 seconds , will exit and back to Time Mode.
3. Date Setting:
In Date Mode :Hold C two seconds enter into"Date Setting Mode", and "Month" flashing, press C to select " Day" or
" Week " , press B to adjust .
When setting mode, Hold on B to activate its auto-run feature.
When setting mode, if no key operation in 60 seconds , it will exit and to Date Mode.
4. Alarm setting:
In Alarm Mode: Hold C two seconds enter into "Alarm Setting Mode", and "Hours" flashing , press the C to select
"Hours", "Minutes", "ALARM / CHIME ",Press B to adjust.
When Set "ALARM / CHIME " ,sequence as follows
ALARM ALM /CHIME CHI ON ALARM ALM /CHIME CHI OFF
ALARM ALM ON CHIME ON CHI
If Alarm function ON , when it is alarm time, the sound will ring 20 seconds then disappear automatically.
When setting mode, Hold on B to activate its auto-run feature.
When setting mode, if no key operation in 60 seconds , it will exit and to Alarm Mode.
5. Dual time zone
In Dual Time Mode: Hold C key for two seconds enter into Time setting Mode, and "Hours"flashing, press C to
select "Minutes" and " 12/24", press B to adjust.
When setting mode, Hold on B to activate its auto-run feature.
When setting mode, if no key operation in 60 seconds , it will exit and to Dual Time Mode.
6. Chronograph functions:
In Chronograph Mode , press C to start chronograph. Press C again to stop, hold C 2s back to zero.
Skmei watch direct sales
www.skmei-watch.com
/