Addonics Technologies DigiCopier III DGC3 User manual

Brand: Addonics Technologies

Model: DigiCopier III DGC3

Type: User manual

This manual is also suitable for

DigiCopier I

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 5:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

www.addonics.com

Phone: 408-573-8580

Email: http://www.addonics.com/sales/query/

DigiCopier III

Model: DGC3

www.addonics.com

Technical Support (M-F 8:30am - 5:00pm PST) Phone: 408-453-6212 Email. www. Addonics.com/support/query/

There are four buttons and an LCD on the panel of DigiCopier III.

1 – LCD shows a function or a message.

2 – it is used to scroll up function menus.

3 – it is used to scroll down function menus.

4 – it is used to execute a function.

5 – it is used to cancel a function.

Connecting the power cable and turning on the DigiCopier III

a. Connect the power cord provided from the wall outlet to the back of the DigiCopier III

b. The power switch is located on the front of the tower.

Steps for the Copying Process (Note: may not able to copy-protected DVD or CD.)

1. Turn on the DigiCopier III by pressing the power switch.

2. Insert media you wish to duplicate into the source tray on the top.

3. Populate the destination trays with blank CDs or DVD media. A rewritable DVD or

CD containing old data can also be used, but the old data will be automatically

erased.

4. After the DVD writers detect the media, press ENT to start copying.

Front view Rear view

LCD will display the copying information similar to the following:

When copying is in progress, MB and time will decrease while the percentage of completion

will increase. “M” means the size of data that you want to copy.

When copying comes to an end, the DVDs copied successfully will be ejected automatically.

The LCD then display the information similar to the following:

The complete user manual of the DVD Duplicator can be found in the included CD or can be

downloaded from the product web page

http://www.addonics.com/products/dgc3.php#tabs-5

Copy X3 4400M

97% 4367M

Result:

Pass 3 Fail 0

Addonics Technologies DigiCopier III DGC3 User manual

Brand: Addonics Technologies

Model: DigiCopier III DGC3

Type: User manual

This manual is also suitable for

DigiCopier I

Download PDF

report

Addonics Technologies DigiCopier III DGC3 User manual

This manual is also suitable for

Addonics Technologies DigiCopier III DGC3 User manual

Related papers

Other documents