Russell Hobbs 18995-56 User manual

Page is loading ...

66

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all

packaging before use.

A IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

1 This appliance can be used by persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been supervised/instructed and

understand the hazards involved.

•Children must not use or play with the appliance.

•Keep the appliance and cable out of reach of children.

s To avoid injury, take care handling the blades, emptying the jug,

and cleaning.

u Don’t add hot liquid (over 40°C), as it may be ejected due to

sudden steaming.

c Misuse of the appliance may cause injury.

2 Unplug the appliance before assembly, disassembly, or cleaning.

3 Don’t leave the appliance unattended while plugged in.

4 If the cable is damaged, it must be replaced by the manufacturer,

its service agent, or someone similarly qualiﬁed, to avoid hazard.

l Don’t put the motor unit in liquid.

5 Switch oﬀ (0) before ﬁtting the jug to the motor unit.

6 Don’t use accessories or attachments other than those we supply.

7 Don’t use the appliance for any purpose other than those described in these instructions.

8 Don’t operate the appliance if it’s damaged or malfunctions.

9 Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes

switch oﬀ for at least 2 minutes, to recover.

household use only

U BEFORE USING FOR THE FIRST TIME

Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.

C PREPARATION

1 Sit the motor unit on a stable, level surface.

, In use, treat the jug, blade unit, and collar as a single unit.

2 Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.

3 Remove the lid.

4 Put the ingredients into the jug.

5 Don’t ﬁll past the 1500ml mark. If you do, the contents may force the lid oﬀ when you start

the motor.

6 Replace the lid.

7 Align the pips on the cap with the slots in the hole in the lid, ﬁt the cap, and turn it clockwise

to lock it.

8 Don’t run the appliance without ﬁtting the cap.

67

[

C SWITCH ON

9 Check that the speed control is set to 0.

10 Put the plug into the power socket.

C SPEED CONTROL

11 Turn the speed control to the speed you want (1 = low, 2 = high).

12 Turn the speed control back to 0 to turn the motor oﬀ.

13 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer

timings and slower speeds.

14 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and

higher speeds.

15 Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In

this direction, the knob is spring-loaded. When you let go, it’ll return to 0.

C ADDING INGREDIENTS

16 To add ingredients while the blender is working, remove the cap, pour the new ingredients

through the hole, then replace the cap.

C FINISHED?

17 Switch the appliance oﬀ (0) and unplug it.

18 Turn the jug anti-clockwise, and lift it oﬀ the motor unit.

U CRUSHED ICE

19 For best results, full the jug with between 150ml and 500ml of ice cubes.

20 Put the lid on the blender, then:

21 Turn the speed control to Y for a second or two, then release it.

22 Check the results, and adjust.

} USING THE MILL

23 Turn the mill upside down.

24 Unscrew the collar.

25 Remove the blade unit and seal.

26 Put the goods to be ground into the bowl – dry goods only.

27 Replace the blade unit and seal.

28 Screw the collar back into place.

29 Turn the mill right way up.

30 Lower the mill on to the motor unit, then turn it clockwise, to lock it in place.

31 Turn the speed control to Y in short bursts till you achieve the size of grind you want.

32 Let the speed control return to 0.

33 Turn the mill anti-clockwise to unlock it, and lift it oﬀ the motor unit.

34 Turn the mill upside down.

35 Tap the mill a couple of times to move all the grounds into the bowl.

36 Unscrew the collar.

37 Remove the blade unit and seal.

38 Empty the bowl.

instructions

diagrams

3 speed control

4 motor unit

5 collar

6 blade unit

7 seal

8 handle

9 jug

10 lid

11 cap

12 mill

13 bowl

` dishwasher safe

68

C CARE AND MAINTENANCE

39 Switch the appliance oﬀ (0) and unplug it.

40 Wipe the outside of the motor unit with a clean damp cloth.

41 Hand wash the removable parts.

` You may wash these parts in a dishwasher.

42 If you use a dishwasher, the harsh environment inside the dishwasher will aﬀect the surface

ﬁnishes.

43 The damage should be cosmetic only, and should not aﬀect the operation of the appliance.

44 To remove the blade unit from the jug:

45 Remove the lid.

46 Sit the jug upside down.

47 Unscrew the collar.

48 Remove the blade unit and seal.

49 Hand wash the removable parts.

50 Replace the blade unit and seal.

51 Screw the collar back into place.

W

ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous substances in electrical

and electronic goods, appliances marked with this symbol mustn’t be disposed of with

unsorted municipal waste, but recovered, reused, or recycled.

h = handful

c = clove(s)

coriander pesto

2 h coriander leaves

2 c garlic

60 g pine nuts

125 m olive oil

60 g Parmesan, grated

Process the coriander, garlic, pine nuts and half the oil till smooth. Transfer to a large bowl.

Stir in the Parmesan. Add oil to adjust the consistency: For a dip: thick. For a topping: medium.

For pasta sauce: thin.

recipes are available on our website:

http://www.russellhobbs.com/ifu/550931

Page is loading ...

Russell Hobbs 18995-56 User manual

Related papers

Other documents