ZyXEL PL100 Quick start guide

Category
PowerLine network adapters
Type
Quick start guide

ZyXEL PL100 brings your home's electrical wiring to work as a high-speed network, allowing you to connect your devices to the internet using any power outlet. Easily extend your wired connection to your PC, printer, game console, or any other device by connecting it to the PL100 via an Ethernet cable and plugging it into an outlet.

ZyXEL PL100 brings your home's electrical wiring to work as a high-speed network, allowing you to connect your devices to the internet using any power outlet. Easily extend your wired connection to your PC, printer, game console, or any other device by connecting it to the PL100 via an Ethernet cable and plugging it into an outlet.

PL100
PowerLine 85 Mbps Ethernet Adapter
Quick Start Guide
Version 1.00
Edition 2
3/2008
Table of Contents
ENGLISH 1
DEUTSCH 5
ESPAÑOL 9
FRANÇAIS 13
ITALIANO 17
РУССКИЙ 21
SVENSKA 25
繁體中文 29
ENGLISH
1
The PL100 PowerLine 85 Mbps Ethernet Adapter transforms a house’s existing
electrical wiring into a powerful networking infrastructure. The PL100 plugs into an
ordinary outlet to easily extend a cable/DSL broadband connection or existing
Ethernet (LAN) network to any other electrical outlet in any room of a house, all
without the need for any new cabling.
The PL100 supports up to an 85 Mbps data rate over common power lines while
providing 56-bit DES Link Encryption for a safe and secure network. Easy to install,
simply plug the PL100 into an outlet and connect it to any broadband modem or
router, and then plug each PC, home entertainment device, gaming console or
network-ready printer into a power socket with another PL100.
Key Features
Up to an 85 Mbps data rate over power lines
No new wiring to install
HomePlug V1.01 compatible
Connections
ENGLISH
2
ENGLISH
Connecting the PL100 to a Cable/DSL Modem and Ethernet Switch
1 Connect an Ethernet cable to the port on the PL100.
2 Connect the other end of this Ethernet cable to an available Ethernet LAN
port of your router or switch (or modem-router device).
3 Plug the PL100 into a wall socket.
4 Confirm that the , and LEDs on the PL100 are on.
5 Install software (PL100 Configuration Utility) from the ZyXEL resource CD
(see User’s Guide for detailed software installation and setup).
11
12
1
3
PL-100
PL100
ENGLISH
3
Connecting the PL100 to a Computer
1 Connect an Ethernet cable to the port on the PL100.
2 Connect the other end of this Ethernet cable to the Ethernet port of your
computer.
3 Plug the PL100 into a wall socket that is near your computer.
4 Confirm that the , and LEDs on the PL100 are on.
Troubleshooting
The LED is off when the PL100 is plugged into an outlet.
Make sure the outlet is working by plugging another electric device into it. If it
is working, plug in the PL100 again. If the PL100 LED still does not light,
contact our technical support.
The LED is off and the
PL100
is not detecting another Homeplug device.
PL-100
11
12
1
3
PL100
4
ENGLISH
Use the PL100 Configuration Utility to detect all other Homeplug devices on
your power line network. Try plugging a second Homeplug device into an
adjacent socket (to your PL100) and see if the lights light up. If you are still
having a problem, please contact our technical support line.
The LED is off, the Ethernet port does not detect a LAN connection.
Check the Ethernet adapter on your computer and make sure it’s enabled and
working properly.
Check that all Ethernet cables are securely connected at all ports and are the
correct type (Cat-5 or higher).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

ZyXEL PL100 Quick start guide

Category
PowerLine network adapters
Type
Quick start guide

ZyXEL PL100 brings your home's electrical wiring to work as a high-speed network, allowing you to connect your devices to the internet using any power outlet. Easily extend your wired connection to your PC, printer, game console, or any other device by connecting it to the PL100 via an Ethernet cable and plugging it into an outlet.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI