CABASSE IO2 Owner's manual

Brand: CABASSE

Model: IO2

Category: Speaker sets

Type: Owner's manual

notice d’installation des enceintes acoustiques

loudspeakers owner’s manual

betriebsanleitung für lautsprecherboxen

www.cabasse.com

iO2

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page1

f r a n ç a i s e n g l i s h d e u t s c h

Mur

wall

wand

Cheville

Rawlplug

Dübel

iO2

Socle

base

sockel

iO2

Vis

screw

schraube

MONTAGE MURAL

DU SOCLE iO2

Wall mounting

of the iO2 base

Wandbefestigung

des iO2 sockels

iO2

sur pied

on stand

mit Fuß

iO2

sur socle

on base

mit Sockel

Santorin 25

caisson de graves

subwoofer

Subwoofer

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page2

POSITIONS DU SATELLITE iO2 SUR SOCLE

O2 speaker positions on its base

Positionen des iO2 satelliten auf dem sockel

position horizontale

horizontal position

waagerecht

position verticale

vertical position

senkrecht

LA VERSION IN CEILING DU SATELLITE iO2

The In Celling version of the iO2 speaker

Die Deckeeinbau Version des iO2 Satelliten

Profondeur/depth/Tiefe :

95mm - 3.74 ”

Ø : 214mm - 8.45 ”

x 4 x 4

Allen #3

> Amplifier

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page3

Configuration 2.1 (stereo)

2 satellites iO2 + 1 caisson de graves Santorin 25

2.1 configuration (stereo)

2 iO2 speakers + 1

Santorin 25

subwoofer

Konfiguration 2.1 (stereo)

2 iO2 Satelliten + 1 Santorin 25Subwoofer

POSITIONNEMENT DES SATELLITES iO2 ET DU CAISSON DE GRAVES SANTORIN 25

iO2 speakers and Satorin 25 subwoofer positioning

Positionierung der iO2 satelliten und des Santorin 25 subwoofers

f r a n ç a i s e n g l i s h d e u t s c h

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page4

Configuration 5.1 (Audio Video)

2 enceintes principales + 3 satellites iO2

+ 1 caisson de graves Santorin 25

5.1 configuration (

Audio Video

)

2 main speakers + 3 iO2 speakers

+ 1

Santorin 25

subwoofer

Konfiguration 5.1 (Audio Video)

2 Hauptlautsprecher + 3 iO2 Satelliten

+ 1 Santorin 25 Subwoofer

Configuration 5.1 (Audio Video)

5 satellites iO2 + 1 caisson de graves

Santorin 25

5.1 configuration (

Audio Video

)

5 iO2 speakers + 1

Santorin 25

subwoofer

Konfiguration 5.1 (Audio Video)

5 iO2 Satelliten + 1 Santorin 25 Subwoofer

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page5

Page is loading ...

e n g l i s h

SAFETY INSTRUCTIONS

xplanation of graphical

ymbols -

The lightning flash

with arrowhead symbol,

within an equilateral tri-

angle, is intended to alert you

to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important ope-

rating and maintenance (servicing) instructions in the literatu-

re accompanying the appliance.

Instructions -

Carefully read through all the safety and

operating instructions before switching on any device for the

first time.

Keep these instructions in mind -

They will be con-

stantly referred to through this manual.

Pay special care to warnings -

All the warning labels on

the product or warning notes in the user’s manual must be

followed.

Follow the instructions -

Follow carefully all the instal-

lation and operation instructions.

Cleaning -

Always take off the power cord before cleaning

the device. Do not use cleaning solvent, whether liquid or air

spray. Using a soft damp cloth is recommended.

Accessories -

To avoid incidents, only use accessories express-

ly recommended by Cabasse.

Water and moisture -

The product shall not be used in

damp or wet locations, such as humid basements, next to a

bathtub, sink, swimming pool or any other similar conditions.

Carts and Stands - The appliance should

be used only with a cart or stand that is recom-

mended by the manufacturer.

> Portable cart warning

Installation on a piece of furniture and stands -

Do not place this device on an unsteady surface, i.e. a stand,

tripod, table, shelf, etc. It may fall and cause serious injury to

a nearby child or adult.

Ventilation outlets -

The device shall not be placed in a

position that restrains the operation of its fans. Avoid installing

the device on a bed, couch, blanket or other similar surfaces

that may prevent the appropriate air flow. Do not install the

device in a confined space, such as a book shelf or other piece

of furniture, that could prevent sufficient air from flowing

freely.

Power -

The device shall only be connected to a source of

power compliant to the one described in this manual or on rel-

evant printed labels on the product. If you are not sure of the

type of power available, please contact your reseller or the

local power company.

Power cords -

The power cords must be laid out in such a

way that they cannot be walked on, pinched, bent under oth-

er devices. Also pay special attention to the matching of the

plugs and the connection of the cord to the device.

Lightning -

For better protection against lightning or if the

device must remain unused for long stretches of time, unplug

the power cord and antenna jack. This minimizes potential

damages due to lightning or line surges.

Overloads -

Avoid overloading the power plugs, extension

cords or power relays. This could result in fire or electric shocks.

Foreign bodies and liquids -

Avoid letting foreign mate-

rials or liquids enter the device. They could cause fire or elec-

tric shocks. Never spill any liquid on the device.

Maintenance -

Users must never attempt to maintain the

device on their own, except for those maintenance operations

described in this manual. Any task beyond regular user main-

tenance must be performed by qualified service operators.

Troubleshooting -

You must unplug your device from the

power supply and have it checked by a qualified technician if:

n The power supply or the plug is damaged.

n Foreign bodies or liquid penetrated the device.

n The device was exposed to dripping or splashing.

n The device does not seem to work correctly under normal

operating conditions. Only operate the controls described in

this manual. Any other operation could damage the device

and require on-site visit of a qualified technician.

n The device has fallen or its housing is damaged.

n The performances of the device are strongly altered.

Spare parts -

If spare parts are needed to repair the device,

make sure that the technician followed the manufacturer’s

recommendations or that the replacing parts feature the same

specifications as the original ones. Non-compliant parts can

result in multiple damages, including fire or electric shocks.

Checks -

After any servicing of the device, ask the techni-

cian to perform appropriate testing to make sure that the

device works safely.

Exposure to high temperatures -

The device should

be kept away from heating sources, such as radiators, heaters,

amplifiers or any other similar item likely to make the operat-

ing temperature rise excessively.

Plastic bags -

Keep them away from children to prevent

any risk of suffocation.

Thank you very much for choosing Cabasse speakers.

Please read carefully these instructions before setting up your speakers.

Caution !

To prevent electric shock, match wide blade plug to wide

slot, insert fully.

Applicable for USA, Canada or where approved for usage

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page9

SET-UP

The components of your system:

n 2, 3 or 5 iO2 speakers

n 1 Santorin 25 active subwoofer

iO2 speaker on base

The wall mountable version of the iO2 speaker requires a single

screw to be positioned on a wall

. The base of this version

is also designed for the iO2 speaker to be positioned on fur-

niture like a bookshelf or a TV-set.

The magnetic link between the sphere and its foot enables a very

easy orientation towards the listening area

. The foot is fit-

ted with 3 cables outputs (in its centre and in both ends) and

the bottom panel integrating the Cabasse logo can be turned

180°, so that you can choose the most elegant way for the

cables.

Attention, the vent hole located at the back of the sphere

should not be sealed by the base.

iO2 speaker stand version

The stand version is supplied with adjustable spikes for a per-

fect stability even if the

floor is not horizontal.

Power supply of

Santorin 25

iO2 SYSTEM positioning

Positioning of the speakers: if possible, try to match with the

drawing, with the Santorin 25 subwoofer in the front area facing

the listening spot. Its position against a wall reinforces the extreme

low register and limits the reflections between 80 and 200 Hz.

However to obtain the best result, it is always necessary to carry out

tests according to the acoustics of the room.

CONNECTIONS

It is imperative to respect the correct phasing when connecting:

+ to + (red) and - to - (black). To connect the speaker cable to

the terminals of the iO2 speaker, pull out the bottom plate

from the base. If your cables are coming out from the wall

just behind iO2 speaker, have the cables go through the bot-

tom plate before connecting them to the iO2 speaker terminals.

Configuration 2.1 (stereo)

n 2 iO2 speakers + 1 Santorin 25 subwoofer

Connect with speaker cables the amplifier outputs to the ter-

minals

HIGH LEVEL INPUT L

(left) and

HIGH LEVEL INPUT R

(right) of the Santorin 25 subwoofer and connect the outputs

HIGH LEVEL OUTPUT L

(left) and

HIGH LEVEL OUTPUT R

(right) of the Santorin 25 subwoofer to the iO2 speaker

inputs

Configuration 5.1

n 5 iO2 speakers + 1 Santorin 25 subwoofer

n 2 main speakers + 3 iO2 speakers + 1 Santorin 25

subwoofer

Connect each speaker output of the 5.1 amplifier directly to the

matching iO2 speaker (front right, front left, centre, etc.).

Connect the subwoofer CINCH RCA output of the amplifier to

one CINCH RCA LINE IN post of the subwoofer.

e n g l i s h

With the iO2 SYSTEM, Cabasse proposes a Hi Fi / audio video system based on the Spatially

Coherent System (SCS) principles coming from our high end ARTIS range of speakers.

With these 2-way very compact speakers combined with a Santorin 25 active subwoofer,

you can get a very high quality system, either in a 2.1 configuration (standard stereo),

in a 5.1 configuration (5 channels system), 6.1 or 7.1…

The Santorin 25 Cabasse subwoofer

s dedicated to iO2 SYSTEM.

Mercure, Santorin 21 or Santorin 30i

Cabasse subwoofer series can be used with

O2 speakers. If you wish to use another

active subwoofer, check that the frequency

bandwidth of the subwoofer is adjustable up to 150 Hz with

a very 24 dB slope at 200 Hz.

We recommend the use of the Santorin 25 or Santorin 30i

subwoofers for their power handling capacity, especially

for a 3 channels or more set-up.

Attention!

Before connecting the

active subwoofer to the

mains, be assured that

the 115-230V switch is

set up according to the

local voltage.

Attention

Do no connect the active subwoofer

to the mains with the supplied

power cable before having comple-

ted all the other connections. After

having selected the right voltage

and connected the subwoofer to the

mains, select either ON or AUTO

position for the POWER switch. .

With the switch on the STAND BY

position, the unit will mute after a

few minutes without input signal.

The system turns on automatically

when signal comes back.

ACTIVE SUBWOOFER SANTORIN 25

Voltage 115/ 230 V AC-50/ 60Hz

Maximum power consumption 165W

Standby power consumtion 0.49W @ 230VAC

0.5W @ 115VAC

Power consumption when off 0.04W @ 230VAC

0.04W @ 115VAC

Useable temperature range +5°C to +35°C

Storage temperature -5°C to +40°C

Useable humidity range 40% to 70%

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page10

Then adjusts the set-up menu of your audio video amplifier:

For 5 iO2 speakers:

For 3 iO2 speakers and 2 large bandwidth front speakers:

SANTORIN 25 SUBWOOFER

ADJUSTMENTS

a) CROSSOVER FREQUENCY

In stereo configuration

, position the poten-

tiometer at 2.00 o’clock, equivalent to 125 Hz.

In 5.1 configuration, adjust the potentiometer on the 180 Hz

position to avoid overlapping with the 125 Hz filter of the

audio-video amplifier.

b) LEVEL

For both 2.1 and 5.1 configurations, adjust the LEVEL

of the subwoofer with various tracks in stereo mode

(CD). To adjust the level of the low frequency effect channel,

do not modify the sound level of the Santorin 25 subwoofer but

go into the set-up menu of your 5.1 audio video amplifier and

adjust the SUBWOOFER/ LFE channel.

c) PHASE

If inverting the PHASE raises the bass level, keep this setting and

adjust again the LEVEL.

WARRANTY

We thank you for registering the Cabasse warranty within 60

days after their date of purchase. You can either send us the

enclosed warranty card fully completed or register on line at

www.cabasse.com. In our web site you will also find infor-

mation on the Cabasse manufacturer warranty.

Thanks to the above information, your system is now nicely set

up and you will enjoy your speaker system for many years. We

receive every day letters from customers expressing the ever

growing satisfaction and musical emotion they have been get-

ting with our speakers over the years. These letters are our first

motivation.

e n g l i s h

Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the models

presented in specification sheets, advertising materials and manuals without prior notice.

Our web site www.cabasse.com will give you the specific adjustments we recommend for the use of our active subwoofers.

Installation

2/7 channels active subwoofer

Ways

2 1

Drivers

tweeter-midrange 2 ways coaxial 25S20 model - 25 cm / 10’

DOM25/13F15-2

Crossover frequency

DOM25/13F15-2 at 2,700 Hz

Frequency bandwith

145 - 22,000 Hz 30 - 150 Hz

in semi-reverberating chamber in semi-reverberating chamber

Pulsed sound pressure

118 dB

Efficiency

93 dB/2.8 v/1m

Nominal impedance

8 ohms

Minimum impedance

3.8 ohms active

Power handling

80 W 250 W

Peak power handling

560 W 750 W

Lowpass cut-off frequency

from 40 to 180 Hz

Phase switch

0 ° normal, 180 ° reverse

Input

2 low level, 2 high level

Magnetic shielding

yes -

Diameter of the sphere

16 cm - 6.3 in

iO2 base version dimensions (h x w x d)

19 x 16x 20 cm - 7.5 x 6.3x 8 in 42 x 36 x 38 cm - 16.5 x 14.2 x 14.6 in

weight

2.2 kg - 4.9 lb 19 kg - 42 lb

iO2 stand version dimensions (hx w x d)

112 x 33 x 33 cm - 44 x 13 x 13 in

weight

11.5 kg - 25 lb

iO2 in ceiling dimensions (h x w x d)

Ø 26 cm/ 10.2 in

weight

2 kg - 4.4 lb

SPECIFICATIONS iO2 SPEAKER SUBWOOFER SANTORIN 25

TECHNICAL DATA

FRONT

SMALL

CENTER

SMALL

SURROUND

SMALL

SUBWOOFER STEREO YES

UBWOOFER / LFE

SUBWOOFER FREQUENCY 125Hz

(or closest possible frequency)

FRONT

LARGE

CENTER

SMALL

SURROUND

SMALL

SUBWOOFER STEREO NO

SUBWOOFER / LFE YES

SUBWOOFER FREQUENCY 125 Hz

(or closest possible frequency)

25Hz

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page11

Page is loading ...

f r a n ç a i s e n g l i s h d e u t s c h

MARQUAGE DEEE

Traitement des appareils électriques et électroniques en fin de vie (applicable dans les pays de

l’Union européenne).

Ce symbole, représentant une poubelle sur roues barrée d’une croix, apposé sur le produit, indique que ce produit ne doit

as être traité avec les déchets ménagers.

Il doit être remis à un point de collecte pour le traitement des équipements électriques et électroniques en fin de vie. En s’as-

surant que ce produit est bien mis au rebut de manière appropriée, vous aiderez à prévenir les conséquences négatives poten-

tielles pour l’environnement et la santé humaine.

Le recyclage des matériaux aidera à conserver les ressources naturelles. Pour toute information supplémentaire au sujet du recyclage de ce

produit, vous pouvez contacter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le produit.

WEEE MARK

Disposal of Wastes of Electrical & Electronic Equipment (Applicable in the European Union)

This symbol on the product, consisting of the crossed-out wheeled bin, indicates that this product shall not be

treated as household waste. Instead it shall be handed over to the applicable collection point for the disposal of

electrical and electronic equipment at the end of life.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recy-

cling of materials will help to preserve natural resources. For more detailed information about recycling of this product, plea-

se contact your local city office, your household waste disposal service or the shop where you purchased the product.

WEEE KENNZEICHNUNG

Behandlung der Elektro- und Elektronik-Altgeräte (Verwendbar in die Europaïsche Union)

Dieses Symbol, das eine durchgestrichene Abfalltonne auf Rädern darstellt, ist auf dem Produkt angebracht und

bedeutet, dass dieses Produkt nicht als unsortierten Siedlungsabfall zu beseitigen ist.

Es muss in eine Sammlungspunkt für die Behandlung von Elektro- und Elektronik-Altgeräte eingerichtet sein.

Versichernd, dass dieses Produkt auf geeignete Weise beseitigt ist, Sie werden helfen, die potentiellen negativen

Folgen für die Umwelt und die Humangesundheit vorzubeugen. Recycling von Baustoffe wird helfen, die Bodenschätzen zu

bewahren. Für jede zusätzliche Information bezüglich des Recyclings dieses Produktes können Sie mit Ihrer Stadtverwaltung,

Ihrer öffentliche Rücknamestelle oder dem Geschäft kontaktieren, wo Sie das Produkt gekauft haben.

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page15

Cabasse SA - 210, rue René Descartes - BP 10 - 29280 Plouzané

Tel +33 (0)2 98 05 88 88 - Fax +33 (0)2 98 05 88 99

www.cabasse.com

Crédit photos : GPO - NOT0278 - 10/01

OK-notice-iO2-16pages:OK-notice-iO2 19/01/10 12:55 Page16

CABASSE IO2 Owner's manual

Brand: CABASSE

Model: IO2

Category: Speaker sets

Type: Owner's manual

Download PDF

report

in other languages

français: CABASSE IO2 Le manuel du propriétaire
Deutsch: CABASSE IO2 Bedienungsanleitung

CABASSE IO2 Owner's manual

CABASSE IO2 Owner's manual

in other languages

Related papers

Other documents