Mobicool A-40 AC User manual

t Absorber Cooler

Instruction Manual 4

k Absorber-Kühlbox

Bedienungsanleitung 14

p Glacière à absorption

Notice d’emploi 26

m Nevera con extractor

Instrucciones de uso 38

C Frigorifero ad assorbimento

Istruzioni per l’uso 50

N Absorptie-koelbox

Gebruiksaanwijzingen 61

l Absorptionskøleboks

Betjeningsanvisning 72

L Absorbasjons-kjøleboks

Bruksanvisning 82

U Kylbox med

Bruksanvisning 92

q Absorbtio-kylmälaatikko

Käyttöohjeet 102

A40

DC/AC

A-40_ACDC.book Seite 1 Dienstag, 28. September 2010 11:51 11

Page is loading ...

Notes on using the instruction manual A-40 DC/AC

4

Please read this operating manual carefully before starting the device.

Keep it in a safe place for future reference. If the device is passed on to

another person, this operating manual must be handed over to the user

along with it.

The manufacturer cannot be held liable for damage resulting from

improper usage or incorrect operation.

Contents

1 Notes on using the instruction manual. . . . . . . . . . . . . . . . . . . . . . . . 4

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6 Operating the cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

7 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1 Notes on using the instruction manual

The following symbols are used in this instruction manual:

D

DANGER!

Safety instruction: Failure to observe this instruction will cause

fatal or serious injury.

!

WARNING!

Safety instruction: Failure to observe this instruction can cause

fatal or serious injury.

!

CAUTION!

Safety instruction: Failure to observe this instruction can lead to

injury.

A-40_ACDC.book Seite 4 Dienstag, 28. September 2010 11:51 11

A-40 DC/AC Safety instructions

5

A

NOTICE!

Failure to observe this instruction can cause material damage and

impair the function of the product.

I

NOTE

Supplementary information for operating the product.

➤ Action: This symbol indicates that action is required on your part. The

required action is described step-by-step.

✓ This symbol describes the result of an action.

fig. 1 5, page 3: This refers to an element in an illustration. In this case,

item 5 in figure 1 on page 3.

Please observe the following safety instructions.

2 Safety instructions

2.1 General safety

D

DANGER!

z On boats: If the appliance is powered by the mains, ensure that

the power supply has a residual current circuit breaker.

!

WARNING!

z Do not operate the device if it is visibly damaged.

z This device may only be repaired by qualified personnel.

Improper repairs can lead to considerable hazards.

z Persons whose physical sensory or mental capacities prevent

them from using this device safely should not operate it without

the supervision of a responsible adult.

z Electrical devices are not toys.

Always keep and use the device out of the reach of children.

z Children must be supervised to ensure that they do not play with

the device.

z If this device's power cable is damaged, it must be replaced by

the manufacturer, customer service or a similarly qualified

person in order to prevent safety hazards.

A-40_ACDC.book Seite 5 Dienstag, 28. September 2010 11:51 11

Safety instructions A-40 DC/AC

6

!

CAUTION!

z Disconnect the device from the mains

– before cleaning and maintenance

–after use

z Food may only be stored in its original packaging or in suitable

containers.

A

NOTICE!

z Only connect the device as follows:

– With the DC cable to a DC plug socket in the vehicle (e. g.

cigarette lighter)

– Or with the 230 V connection cable to the 230 V AC mains

supply

z Check that the voltage specification on the type plate

corresponds to that of the energy supply.

z The cooling device is not suitable for transporting caustic

materials or materials containing solvents.

z Never pull the plug out of the socket by the cable.

z If the cooler is connected to the DC socket: Disconnect the

cooler and other power consuming devices from the battery

before connecting the quick charging device.

z If the cooler is connected to the DC socket: Disconnect the

cooler or switch it off when you turn off the engine. Otherwise

you may discharge the battery.

2.2 Operating the device safely

D

DANGER!

z Do not touch exposed cables with your bare hands. This

especially applies when operating the device with an AC mains

power supply.

!

CAUTION!

z Before starting the device, ensure that the power supply line

and the plug are dry.

A

NOTICE!

z Do not use electrical devices inside the cooler unless they are

recommended by the manufacturer for the purpose.

A-40_ACDC.book Seite 6 Dienstag, 28. September 2010 11:51 11

A-40 DC/AC Scope of delivery

7

z Do not place the device near naked flames or other heat

sources (heaters, direct sunlight, gas ovens etc.).

z Danger of overheating!

Ensure at all times that there is sufficient ventilation so that the

heat that arises during operation does not build up. Make sure

that the device is sufficiently far away from walls and other

objects so that the air can circulate.

z Ensure that the ventilation slots are not covered.

z Do not fill the inner container with ice or fluid.

z Never immerse the device in water.

z Protect the device and the cable against heat and moisture.

z Keep to the following distances:

– a gap of at least 10 cm at the rear

– a gap of at least 5 cm on either side

2.3 Operating the device safely with 12 Vg

A

NOTICE!

z The cable between the battery and the cooler must be protected

by a fuse of max. 15 A.

z Only use cables with the corresponding cable cross section

(see the table on page 10).

3 Scope of delivery

4 Intended use

The cooler is suitable for cooling and freezing foodstuffs.

The device is also suitable for camping.

If you wish to cool medicines, please check if the cooling capacity of the

device is suitable for the medicine in question.

Quantity Description

1Cooler

1 Tray with cover for making ice cubes

1 Instruction manual

A-40_ACDC.book Seite 7 Dienstag, 28. September 2010 11:51 11

Technical description A-40 DC/AC

8

The cooler has been designed for operation with a 12 Vg voltage

source (e. g. the cigarette lighter of a vehicle) or alternatively for

operation with a mains voltage of 220 – 240 Vw.

5 Technical description

The cooler is suitable for use when camping, on a patio, in the garden, or

anywhere where a 12 Vg power connection (such as the cigarette lighter in

a vehicle) or a 220 V – 240 V mains voltage is available.

You can cool goods to up to 25 °C below ambient temperature.

The device cools with a maintenance-free absorber circuit. Concentrated

ammoniac solution is heated in a boiler and then driven out in gaseous form.

The gas which is subjected to high pressure, is liquefied in a condenser and

then evaporated by adding hydrogen. This removes warmth in the cooling

area.

6 Operating the cooler

!

CAUTION!

Food may only be stored in its original packaging or in suitable

containers.

I

NOTE

z Before starting your new cooler for the first time, you should

clean it inside and outside with a damp cloth for hygienic

reasons (please also refer to the chapter “Cleaning and mainte-

nance” on page 11).

z A few water drops may form inside the cooler if it has been cool-

ing for a lengthy period. This is normal because the moisture in

the air condenses to water when the temperature in the cooler

falls. The cooler is not defective. Wipe it out with a dry cloth if

necessary.

6.1 Energy saving tips

z Choose a well ventilated installation location which is protected against

direct sunlight.

z Allow warm food to cool down first before placing it in the device to keep

cool.

z Do not open the cooling device more often than necessary.

A-40_ACDC.book Seite 8 Dienstag, 28. September 2010 11:51 11

A-40 DC/AC Operating the cooler

9

z Do not leave the cooler unit open for longer than necessary.

z Arrange the food in the cooler so that air can circulate inside.

6.2 Using the cooler

A

NOTICE!

z Ensure that the objects placed in the cooler are suitable for cool-

ing to the selected temperature.

z Ensure that food or liquids in glass containers are not exces-

sively refrigerated. Liquids expand when they freeze and can

thus destroy the glass containers.

I

NOTE

z Cool the cooler for about 24 hours before starting your journey.

This way your cooler will attain the required cooling capacity

faster when you reach your destination.

z The cooling capacity can be influenced by:

– The ambient temperature

– The amount of food to be conserved

– The frequency with which the lid is opened.

z The device may give off a smell for a short time when it is first

operated.

➤ Place the cooler on a firm and level base.

Check the horizontal position (±2°) with a spirit level if necessary.

➤ Open the lid of the control panel (fig. 2 1, page 3) by pressing down on it.

Press down on the lid again to close it.

I

NOTE

The further you turn the thermostat control (fig. 2 2, page 3) to-

wards “MAX”, the lower the refrigerating temperature.

A-40_ACDC.book Seite 9 Dienstag, 28. September 2010 11:51 11

Operating the cooler A-40 DC/AC

10

Connecting to 220 V – 240 V

A

NOTICE!

Check that the voltage specification on the type plate corresponds

to that of the energy supply.

➤ Plug the earthed plug into a properly installed safety plug socket.

➤ Set the thermostat control (fig. 2 2, page 3) to “MAX”.

➤ Wait until the temperature in the cooler has dropped.

➤ Set the thermostat control (fig. 2 2, page 3) to the desired temperature

range.

“MIN” corresponds to the lowest cooling power. “MAX” corresponds to

the highest cooling power.

➤ To switch off the cooler, set the thermostat control (fig. 2 2, page 3) to

“0” and pull out the plug.

Connecting to 12 Vg

I

NOTE

z You cannot set the temperature with the thermostat control dur-

ing battery operation. The device is simply switched on by con-

nection to a 12 V power source and starts cooling.

z Disconnect the cooler from the battery when the engine is not

running as otherwise the battery will be completely run down.

➤ Make sure that the cable from the battery to the cooler is protected by

a fuse (max. 15 A).

➤ Select a cable cross section for the cable between the battery and the

socket of the 12 V voltage supply in accordance with the following table:

➤ Make sure that the thermostat control for 220 V – 240 V operation

(fig. 2 2, page 3) is in the “0” position.

➤ Insert the plug of the connection cable into the 12 V socket

(e.g. cigarette lighter).

The polarity cannot be reversed.

➤ To switch off the cooler, pull the plug out of the socket.

Cable length Cable cross section

Up to 2.5 m 2.5 mm²

2.5 m to 4.0 m 4.0 mm²

A-40_ACDC.book Seite 10 Dienstag, 28. September 2010 11:51 11

A-40 DC/AC Cleaning and maintenance

11

Defrosting the cooler

Humidity can form frost in the interior of the cooler. This reduces the cooling

capacity. Defrost the device in good time to avoid this.

A

NOTICE!

Never use hard or pointed tools to remove ice or to loosen objects

which have frozen in place.

To defrost the cooler, proceed as follows:

➤ Take out the contents of the cooler.

➤ Place them in another cooling device to keep them cool, if necessary.

➤ Switch the cooler off.

➤ Leave the cover open.

➤ When everything has defrosted, empty the cooler and wipe it out.

Switching off and storing the cooler

If you do not intend to use the cooler for a long time, proceed as follows:

➤ Switch the cooler off.

➤ Disconnect the power supply.

➤ Clean the cooler (see chapter “Cleaning and maintenance” on page 11).

➤ Leave the cover slightly open.

This prevents odours from building up.

7 Cleaning and maintenance

!

WARNING!

Always disconnect the device from the mains before you clean and

service it.

A

NOTICE! Risk of damage

z Never clean the cooler under running water or in dish water.

z Do not use abrasive cleaning agents or hard objects during

cleaning as these can damage the cooler.

➤ Occasionally clean the device interior and exterior with a damp cloth.

A-40_ACDC.book Seite 11 Dienstag, 28. September 2010 11:51 11

Disposal A-40 DC/AC

12

8 Disposal

➤ Place the packaging material in the appropriate recycling waste bins

wherever possible.

M

If you wish to finally dispose of the product, ask your local recycling

centre or specialist dealer for details about how to do this in

accordance with the applicable disposal regulations.

9 Troubleshooting

In the event of malfunction, please check the following:

Fault Possible cause Suggested remedy

The cooler does not

work.

The cooler is not prop-

erly connected to the

electricity supply.

Check if the voltage supply is in full work-

ing order.

Check if all electrical contacts are in full

working order.

Check if the voltage supply corresponds to

the value on the type plate.

Check if the thermostat control is

switched on.

Check if several energy sources are con-

nected at the same time.

The cooler has not

been set up properly.

Check if the device is horizontal.

Check if the ventilation of the device

is sufficient.

The cooler has not

been filled properly.

Check if warm food has been put into

the device.

Check if the cooling space has been over-

filled or packed too densely.

The refrigerant circuit

is defective.

This can only be repaired by an authorised

customer services unit.

The cooler does not

start up after a long

period of inactivity.

– Disconnect the device from the energy

supply and turn the cooler upside down

and wait around five minutes.

Turn the cooler the right way up again

and switch it on again.

A-40_ACDC.book Seite 12 Dienstag, 28. September 2010 11:51 11

A-40 DC/AC Technical data

13

10 Technical data

Versions, technical modifications and delivery options reserved.

The device has the e4 approval.

This device carries the GS symbol to indicate tested and proven safety.

A40 DC/AC

Capacity: 40 l

Connection to 220 V – 240 V

Power consumption: 72 W

Current consumption: 0.3 A

Connection to 12 V

Power consumption: 72 W

Current consumption: 6.1 A

Cooling temperature range: Up to 25 °C below ambient temperature

Weight: approx. 18.5 kg

Testing/certification:

A-40_ACDC.book Seite 13 Dienstag, 28. September 2010 11:51 11

Page is loading ...

www.mobicool.com

4445100299 09/2010

A-40_ACDC.book Seite 112 Dienstag, 28. September 2010 11:51 11

Mobicool A-40 AC User manual

This manual is also suitable for

Mobicool A-40 AC User manual

in other languages

Related papers

Other documents