Moneual MR6800M-M3 Series Quick start guide
- Category
- Robotic vacuum cleaners
- Type
- Quick start guide
Ver 1.0
MR6800M-M3** Series
Quick Start Guide
Robot Cleaner
What’s in
the Box
1
Robot cleaner (1400mA built-in battery)
2
Charger
3
Power adaptor
4
Power cord
5
Remote control
(included two AAA batteries)
6
Side brushes (1 set)
7
Cleaning brush
8
User manual
Quick start guide
9
Water-supply big mop kit
What’s in the Box
2 3
4 5
1
6 7
8 9
Overview
2
3
4
8
7
6
5
1
Control buttons and indicators
2
Dust bin cover
3
Bumper
4
Obstacle and signal detection sensors
5
Air outlet
6
Adaptor jack
7
Power switch
8
Signal receiving sensor
9
Cli detection sensors
10
Charging terminals
11
Wheels
12
Side brush installation pins
13
Dust inlet
14
Main brush
15
Mop plate installation holes
Robot cleaner
10
11
9
11
15
9
12
13
11
14
9
12
1
Power/charging lamp
2
Guide signal transmission sensor
3
Charging terminals
4
Adaptor holder
5
Adaptor jack
6
Sensor’s signal distance selection switch
Charger
2
1
3
5
6
4
1
1
Power button
Þ
Press to turn the power on/o.
Þ
Press to return the robot cleaner to the operation mode when it has
stopped due to failure.
2
Mode button
Þ
Press to select the cleaning mode.
3
Start/stop button
Þ
Press to start the selected operation.
Þ
Press to start/stop cleaning and driving.
4
SELECT/MANUAL button
Þ
Press to conrm your selection.
Þ
Press to start manual cleaning.
5
Direction buttons
6
CHARGE button
Þ
Press to move robot cleaner to charger.
7
MOP cleaning button
8
INTENSIVE cleaning button
9
VACUUM button
Þ
Press to turn the turbo function on/o.
10
SHADOW cleaning button
11
CORNER cleaning button
12
RESERVATION button
13
MUTE button
Þ
Press to turn voice guidance on/o.
14
ROOM SEL button
Þ
Press to select the room to clean.
Remote control
2
6
9
12
13
1
3
8
11
14
10
7
5
4
1
Start/stop button
2
Power button
3
Cleaning mode selection
button
4
Turbo mode indicator
5
Shadow cleaning mode
indicator
6
Auto cleaning mode indicator
7
Mop cleaning mode
indicator
8
Timer (one time) indicator
9
Timer (every day) indicator
10
Room selection indicator
11
Error indicator
12
Charging mode
indicator
13
Battery level indicator
Control buttons and indicators
6
5
11
13
12
21 3
4
10
9 8 7
Installing
Installing the Side Brushes
Þ
Check for the L mark
under the side brush.
Þ
Align with the L mark under
the robot cleaner and
install the L brush.
Þ
Check for the R mark
under the side brush.
Þ
Align with the R mark
under the robot cleaner
and install the R brush.
Installing the Charger
Ě
If you install the robot cleaner in a place where it will be exposed to direct sunlight, the heat of the sun may interfere with the auto
charging, and the robot cleaner may become discolored over time.
Ě
If your robot cleaner can’t return to the charger, reset the detection distance.
Þ
Connect the power adaptor.
Þ
Set the robot cleaner detection distance (5 m or 8 m).
Þ
Place the power adaptor in the holder of the charger.
1
Þ
Check the power connection (blue lamp).
2
Þ
Check the location of the charger.
Clear all obstacles in the area within 1 m in front, left,
and right of the charger.
3
Cleaning
Modes
Auto Cleaning
Corner Cleaning
Intensive Cleaning
ǘ
The robot cleaner intensively cleans the surrounding area relative to its current location.
ǘ
The robot cleaner runs along the walls of the current place where it is.
ǘ
It is the normal cleaning mode.
Ě
In the area in which there are many obstacles, the robot cleaner may not operate in normal cleaning modes.
4
4
or
2 43
or
3
3
2
or
2
or
Þ
Turn the power
switch on.
1
Þ
Turn the power
switch on.
1
Þ
Turn the power
switch on.
1
Ě
Before scheduling, you must install the charger.
Shadow Cleaning
ǘ
You can clean under your bed or furniture.
Manual Cleaning
ǘ
You can control the robot cleaner directly using the remote control.
Ě
To use shadow cleaning mode, turn the room light on. In a dark room, the robot cleaner can’t
detect the space under the bed or furniture.
Þ
Put the robot cleaner in front of a bed or furniture.
2
Þ
Turn the power switch on.
1
Þ
Stop the robot cleaner that
is operating by pressing the
Start/stop(
Ě
Ħ
) button.
1 2
Scheduled Cleaning
ǘ
You can schedule the robot cleaner to start cleaning after 1 hour, or at the same time every day.
Þ
Select the time (1 hour or
every day) by pressing the
RESERVATION button on the
remote control.
1 2 3
3
or
5
4
or
Þ
Move the robot
cleaner by
pressing direction
keys on the
remote control.
3
Mop Cleaning
ǘ
In mop cleaning mode, the robot cleaner can completely remove ne dust on the oor.
Þ
Turn the power switch o.
2
Þ
Attach the mop plate.
3
7
Þ
Supply water into the mop plate and
attach the mop to it.
1
5
or
Þ
After cleaning, remove the mop plate from the robot cleaner and the mop from
the mop plate.
8
Ě
Remove water in the mop plate and let cover open to dry the mop plate.
Ě
Wash and dry the mop for the next use.
Ě
You may use the included cleaning brush for cleaning the mop more thoroughly.
6
or
Selecting the mop cleaning mode
You can select the mop cleaning mode by pressing the Mode (M)
button when it is cleaning in mop cleaning mode.
The mode will be changed as follows:
Auto
mode
Wave
mode
Tornado
mode
Zigzag
mode
Auto
mode
Auto mop cleaning mode
In auto mop cleaning mode, the robot cleaner runs the
mop cleaning in the following patterns, without performing
vacuum cleaning.
or
Zigzag modeTornado modeWave mode
Þ
Turn the power
switch on.
4
Ě
If you apply excessive force to the
mop plate when you install it on the
robot cleaner, the joint parts of the
mop plate may be damaged.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Moneual MR6800M-M3 Series Quick start guide
- Category
- Robotic vacuum cleaners
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Moneual ME685 User manual
-
-
Moneual MR6800M series User manual
-
Moneual ME770 Owner's manual
-
-
Moneual ME770 Style User manual
-
Moneual Lab H65 User manual
-
-
-
Moneual 972 User manual
