Quick Reference Card: Sonar Mode Controls
86066-3
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
FREQUENCY
ZOOM
BTM.LOCK
A-SCOPE
Trackpad
· Controls cursor position and the slider values.
· Hold the trackpad down to move the cursor faster.
CLEAR
· Sonar mode: functions as the ENTER key.
· Chart or Radar mode: cancels operation in progress and
returns to the previous display.
· Deletes an object/function under cursor control.
ENTER
· Confirms selection and (if appropriate) clears current
soft key labels. Unit performs the selected task, accepts
changes, or displays more options.
· When cursor text is displayed, takes cursor control of
the object.
· When arrow-head cursor symbol is displayed, drops the
object under cursor control.
POWER
· Press and hold until unit beeps to turn on display.
· Press for 3 seconds to turn off display.
· Press RANGE to toggle between AUTO/MAN adjustment.
· Press top of RANGE key to decrease range (move up).
· Press bottom of RANGE key to increase range (move down).
· Press SHIFT keys to adjust range shift value.
· Press ENTER to finish.
RANGE
AUTO MAN
SHIFT
50 FT
RANGE Used to adjust Range and Range shift.
· Press to display soft keys
· Press soft key to display required setup menu, then use trackpad
to select option and soft key to change option.
· Press ENTER to close menu, and CLEAR to finish.
SYSTEM
SET UP¬
SONAR
SET UP¬
SCROLL
SPEED
TRIP
RESET
MENU Provides access to setup options.
· Press to display soft keys.
· Press SPLIT to toggle HORizontal display windows or VERtical
sonar data window.
· Press WINDOWS to toggle window OFF/ON.
· Press SELECT WINDOWS to choose window option.
· Press ENTER to finish.
SELECT
WINDOWS
WINDOWS
OFF ON
DISPLAY Controls display mode windows.
· Press for display mode and soft keys display.
· Press again to toggle through display modes, and ENTER.
· Press and hold for 2 seconds for full screen display.
VRM/EBL Use to identify a position with depth and distance
behind boat.
· Press to place VRM/EBL if one not already placed.
· Adjust position using trackpad, and press ENTER to finish.
· Press FISH soft key to toggle fish alarm ON/OFF.
· Press SHALLOW/DEEP to access corresponding alarm set up soft keys.
· Press ENTER to finish.
DEEP
ALARM
SHALLOW
ALARM
FISH
ALARM
OFF ON
ALARMS Use to set up the Fishfinder alarms.
· Press to display the alarms soft keys.
D5561-3
· Press soft key to place waypoint at cursor or vessel, display the
waypoint list, or load/save a C-MAP user card.
· Press ENTER to finish.
MARKS / MOB Controls waypoints, and Man Overboard function.
· Press to display waypoint soft keys.
· Press and hold for 2 seconds to activate or cancel MOB.
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL
WAYPOINT
LIST
SPLIT
HOR VER
· Press GAIN ADJUST to select the frequency you are adjusting.
· Press GAIN to cycle from MANUAL through three levels of automatic
gain adjustments: CRUISING, TROLLING, and FISHING.
· Press COLOR GAIN soft key to toggle between AUTO and MANUAL.
· Press STC to select MANUAL (or AUTO with Digital Sounder Module).
GAIN
ADJUST
200 50
75%
CRUISING
COLR GAIN
STC
MANUAL
GAIN Use to adjust GAIN, COLOR GAIN, and STC.
· Press to display soft keys
40%
AUTO
80%
MULTI Controls display lighting/contrast (mono) or brightness, back-
ground color, and color threshold (color) controls and white line feature.
· Press to display soft keys.
Monochrome LCD
· Press soft keys to toggle between ON/OFF.
· Adjust slider using trackpad, and press ENTER to finish.
37%70%
LIGHT CONTRAST
WHT LINE
OFF ON
Color LCD: Press and hold MULTI key for brightness to 100%.
· Press soft key to toggle POWER between AUTO/LO/HI.
· Adjust brightness (LIGHT) slider using trackpad.
· Press COLOR SETTINGS to access B'GROUND COLOR, COLOR THRESH
or COLOR SET soft keys.
· Press soft key to turn WHT LINE OFF or ON.
· Press ENTER to finish.
70%
LIGHT
ON
WHT LINE
OFF ON
COLOR
SETTINGS
POWER
AUTO LO HI
POWER
AUTO LO HI
· For MANUAL settings, adjust slider using trackpad.
· Press ENTER to finish.
If full screen is Sonar mode, MOB switches to Chart mode.
LOAD/SAVE
USER CARD
Soft Keys
· Press to select option, or slider.
· Labels change when you press soft/dedicated key.
· Elipses (...) after the text indicate that pressing soft key
leads to another screen of soft key options.